Front h4 bulb replacement - Citroen Berlingo / Peugeot Partner
Front h4 bulb replacement - Citroen Berlingo / Peugeot Partner
To replace an H4 bulb in your car, follow these steps:
Make sure the ignition is off and the key is removed from the ignition. Wait a few minutes for the bulb to cool down if the car has been in use.
Open the hood of your car and locate the front of the headlight where the H4 bulb you want to replace is located.
Identify the wires and electrical connectors leading to the bulb. Make sure you know how to unhook the connector from the bulb. Some connectors may need to be twisted or slightly pressed to disengage.
Locate the H4 bulb retaining ring. It can be held in place by a spring-loaded latch or swivel ring. Identify how to unlock or unscrew this ring.
If the ring is held in place by a spring-loaded latch, gently swing it back to unlock and release the bulb. Then remove the bulb from the socket.
If the ring is held in place by a swivel ring, unscrew it in the appropriate direction (usually counterclockwise) and remove it. Then remove the bulb from the socket.
Prepare a new H4 bulb, avoiding touching directly to the glass of the bulb. By touching the bulb with your bare fingers, you can leave grease on it, which can damage it during use. Use a clean cloth or gloves if necessary.
Insert the new H4 bulb into the socket. Make sure it is seated correctly and there is no slack.
If the H4 bulb has a ring
Test the new bulb by turning on the high beam and low beam. Check if it works properly.
It is important that you check your car's owner's manual or consult a professional if in doubt
Drop into the channel; for more;
/ @naprawynawariackichpa...
second channel;
/ telefonyklasiczne
third channel;
/ spankoasmr
#do-it-yourself guides