Remove and Replace AC Compressor Clutch and Bearing Without Removing Refrigerant or Compressor

Рет қаралды 441,783

3 жыл бұрын

If your car's AC compressor is making noise, the clutch/pulley bearing likely needs to be replace. On my 1995 Toyota Camry, we replaced the AC compressor clutch bearing without discharging the refrigerant from the compressor or removing the AC compressor from the car. We removed the compressor mounting bolts and repositioned the compressor just enough to be able to remove the pressure plate and pulley to replace the clutch bearing. We also tested the AC compressor magnetic coil and clutch assembly before we remounted the AC compressor to the car.
If you'd like to donate:
paypal.me/frugaldiy1
TOOLS AND PRODUCTS USED:
TEKTON 16 Inch Groove Joint Pliers (4-1/4 in. Jaw) | 37526: amzn.to/3nXxd1o
Klean-Strip Denatured Alcohol: amzn.to/3cYR0Hf
Permatex 24200, Medium Strength Threadlocker Blue: amzn.to/3liEPto
Sumnacon Dual-Ended Crocodile Alligator Clips: amzn.to/3HYaZnV
LEXIVON 3/8 Inch Drive Click Torque Wrench: amzn.to/3EgQr81
//DISCLAIMER: Links included in this description area contain affiliate links. If you click on one of the links and purchase a product, I will receive a small commission.

Пікірлер: 340

@lildoggy4u 2 жыл бұрын

The absolute best step by step troubleshooting /assembly demonstration I've ever witnessed on KZfaq. Thank you from the public. I hope all other mechanics sharing tips see this.

@frugaldiy1 2 жыл бұрын

You're welcome, Glenn, and thank you! That's one of the nicest and most thoughtful comments I've received on my channel. I truly appreciate that you took the time to write it. Comments like yours remind me to show detailed steps in the process of fixing stuff so others feel like they too can tackle the project. Sister says, "Thank you," too!

@jameskirk3 Жыл бұрын

Very much agree. I was hesitant to do a clutch job myself, but going for it now. No chance I pay a shop to do this when I have a step by step guide.

@justchris846 Жыл бұрын

Very Smart lady! This has to be the best AC compressor repair video I've watched.

@frugaldiy1 Жыл бұрын

Thank you, Chris, for taking the time to say such a nice thing. I appreciate that. ;)

@forgetfulme1719 2 жыл бұрын

professional camera and lighting, clear instruction. I hate those KZfaqrs filmed in the dark and only said 'it is done, a success'.

@frugaldiy1 2 жыл бұрын

Thank you, forgetful me, for the thoughtful and nice comment. I hope the video helped you.

@biggestbog Жыл бұрын

This ended up being for a different vehicle than I was looking for, but I just have to say this is very well done. Nice job ladies, I'm impressed

@frugaldiy1 Жыл бұрын

Thank you, The Geek Side, sister and I appreciated that.

@dhflannagan1 Жыл бұрын

Best DIY a/c clutch replacement video and narration out there. She covers everything in detail. This is a 2 person DIY job. Thanks so much!

@frugaldiy1 Жыл бұрын

You're welcome, David, and thank you for taking the time to write such a thoughtful and nice comment. Sister and I truly appreciate that. You've made our day! Happy DIYing!

@biasi0723 2 жыл бұрын

Spot on!! Exact amount of detail without excessive information. Thank you for taking your time to help a fella out. Take care.

@frugaldiy1 2 жыл бұрын

You're welcome, Richard, and thank you for taking the time to leave such a nice comment. Your words mean a lot to me. Happy DIYing!

@1gyroj 2 жыл бұрын

i second that but what kind of vehicle are you working on?

@JamesAPusateri Жыл бұрын

You two just saved me a huge headache! I’m doing this exact thing on my daughters car tomorrow and I doubt I would ever find anything else out there that is more informative and visual. I’ve been looking online for over a week. So glad I found this video. Thank you!

@frugaldiy1 Жыл бұрын

You're welcome, James. I'm glad the video is useful to you, and thank you for the nice comment.

@hokehinson5987 2 жыл бұрын

great instructional video.....am retired ASE mechanic was looking for a video to show my son how this procedure is performed. good step by step detailed and sequenced instructions on procedure!

@frugaldiy1 2 жыл бұрын

Well, hoke, what a nice thing to say. Thank you! Your words carry great weigh, given your certification and experience. I also appreciate that you took the time to leave your comment. Happy DIYing to you and your son!

@hokehinson5987 Жыл бұрын

@@frugaldiy1 your welcomed!

@navyblu79 2 жыл бұрын

I cannot thank you enough ladies. Appreciate the very thorough tutorial. I just placed the bearing I bought in the freezer. New subscriber here.

@frugaldiy1 2 жыл бұрын

You're welcome, navyblu79, and thank you for the kinds words. That was a fun project to work on! Merry Christmas to you and your loved ones.

@kevinwalls6706 3 ай бұрын

I was actually trying to look for how to do this on my Honda. But you guys were so awesome with everything you were doing I couldn't leave. You guys are EXCELLENT!!!

@3dr0cks Жыл бұрын

I was completely lost and now I know how to fix my car. Well done ladies!

@frugaldiy1 Жыл бұрын

Thank you, Dertro. Sister and I appreciate your comment, and I hope your project goes smoothly.

@jampskan5690 2 жыл бұрын

I am glad I watched this! I was going to order the whole A/C clutch assembly. I like that this cost less than $20, fantastic video!!!

@frugaldiy1 2 жыл бұрын

Thank you, jampskan. I'm glad the video helped you. Yep, it's a cheap repair.

@budakota 2 жыл бұрын

AWESOME INFO CAMRY VIDEO-your camry a/c clutch bearing replacement video is the ONLY video/Information even that I FOUND on the WHOLE INTERNET /YOU TUBE that Actually TELLS YOU HOW TO REPLACE /INSTALL the A/C CLUTCH BEARING ON TOYOTA CAMRYS from 1992-2001 ...So needless to say.....THANKS SOOOOOOO VERY VERY MUCH!!!

@frugaldiy1 2 жыл бұрын

You're welcome, JACKBUD. Thank you for your kind words and comment. They mean a lot to me. Happy DIYing!

@noey5766 2 жыл бұрын

Really, really nice video. Had no idea you could change the clutch assembly without taking out the whole compressor, and avoid the extraction and refilling of the refrigerant issue. So many useful tips/techniques you shared. THANK YOU. Please do more videos as you do more work on your cars ...LOL!

@frugaldiy1 2 жыл бұрын

You're welcome, Noey. And, thank you for one on the most thoughtful and nicest comments I've ever received. You've made my day! Happy DIYing!

@djsparkyy 2 жыл бұрын

Great video, I've never seen anyone torque the mounting bolts on an AC compressor before. You ladies are thorough! lol One small tip. Some compressors/alternators have dowel pins to align them to the engine. Cleaning them off and applying anti seeze to the holes will help prevent them from getting stuck and being difficult to remove in the future.

@frugaldiy1 2 жыл бұрын

Thank you for both the kind words and the wonderful tip you shared with us and other viewers. We are all learning together.

@ask43242flight Жыл бұрын

I agree with other viewers and this is the best tutorial on how to replace ac bearing. Appreciate your great work to help people like me.

@frugaldiy1 Жыл бұрын

JackM, it's my absolute pleasure to help folks fix stuff themselves and save their hard-earned money. Thank you for your thoughtful words and for taking the time to write them. Merry Christmas to you and your loved ones! ;)

@ericbazan9591 2 жыл бұрын

Awesome job! Nice commentary and excellent explanation of work being performed! Great job ladies!

@frugaldiy1 2 жыл бұрын

Thank you so much, Eric, for your compliment and kind words! They truly mean a lot to me. You've made my day!

@-DC- 2 жыл бұрын

One of the best How To videos I've ever seen thank you Ladies 👊

@frugaldiy1 2 жыл бұрын

D C, you are so kind. Thank you very much for your wonderful comment. Your words mean a lot to sister and me.

@cindyweathersbee4632 Жыл бұрын

Hey yall. One of the best videos i’ve ever watched. Thanks, for sharing. We can tell this wasnt your first rodeo.

@frugaldiy1 Жыл бұрын

You're welcome, Cindy. Thank you for taking the time to leave such a thoughtful comment. Means a lot to me.

@absi115 2 жыл бұрын

Thank you I was gonna take the compressor out until I watch your video 🙏🏾much love from Saudi Arabia

@frugaldiy1 2 жыл бұрын

Hi Joe, and much love back for the USA! I'm so glad the video helped you.

@juancarlosmorales6775 Жыл бұрын

Great video. Thank you so much for the detailed explanation. It cleared a few things I did not know where to start: using the pliers to lock the pressure plate. Others activate the magnetic clutch from the dashboard, unscrew the 10 mm bolt, turn it off and continue. However, that approach only works if the magnet is good, mine was damaged so your approach works best. One comment though: when using the extractor, it is very important to use the cup to support the extractor bolt on the compressor case, and not on the compressor shaft. Putting axial pressure on the compressor shaft "could/might" damage the compressor. If the pulley comes out easily, likely no issue, but if the pulley is very stuck the extra pressure is not good for the shaft.

@frugaldiy1 Жыл бұрын

Thank you, Juan, and thank you for the valuable info you added. It helps us all. Happy New Year!

@heinrichbornman6290 2 жыл бұрын

Excellent ladies. I am in the process to overhaul my compressor and was not sure how to remove the bearing. Thanks 🙏

@frugaldiy1 2 жыл бұрын

Thank you, Heinrich. Good luck with your project. Have fun!

@Wakeupandsniffthecoffee Жыл бұрын

Good explanation about the shims. I've only recently heard much about them in preparation to work on mine. I caught the drift from other videos, but you explained them in more depth. Thanks!

@frugaldiy1 Жыл бұрын

You're welcome, Jim, and thank you for your nice comment. I appreciate that.

@TheAnonymous1one Жыл бұрын

Great video. Clear communication and no bs. 👍👍

@frugaldiy1 Жыл бұрын

Thank you, Anonymous. I appreciate that. ;)

@denniskubai 8 ай бұрын

These ladies are God sent. What a nice and generous demonstration! I already love them..❤❤❤ God bless you for this wonderful video. I have exactly this problem in my Toyota Premio 265 yr 2009. We removed the sarpentine belt. AC OFF, engaged the gear, no rattling. Switched the AC ON with the belt removed, slight rattling. Put back the belt, AC ON, engaged the gear, more rattling sounds.

@frugaldiy1 8 ай бұрын

Thank you, Dennis, for taking the time to leave such a nice and thoughtful comment. It means a lot to me. I'll pass it on to Sister, and it will make her smile. Merry Christmas, Sir!

@denniskubai 8 ай бұрын

@@frugaldiy1 for real, I wish you were here in Kenya. You could have repaired this AC for me. But I have saved this video on KZfaq. We will watch it together with my mechanic before commencing the repairs. Say hi to your sister and Merry Christmas from me and my family. We love you..♥️♥️♥️

@frugaldiy1 8 ай бұрын

Love you, too, my friend. ;)

@michaelsilveira3495 Жыл бұрын

Ladies, an absolutely amazing and detailed high-quality video on how to I’m a licensed mechanic and I have nothing but praise for your instructional video. Thank you.

@frugaldiy1 Жыл бұрын

Michael, that means a great deal coming from you. I truly appreciate your thoughtful comment and that you took the time to write it. I'll tell Sister you said that and that will make her day--mine too! ;) I can't thank you enough.

@popeyewatch 7 ай бұрын

Awesome step-by-step tutorial. Thank you for sharing!

@cablaze1 11 ай бұрын

Very nice job on the video👍You provided much detail for performing this task.

@helmutmeder9078 28 күн бұрын

Thank you very much for this instructive video. I must confess that I am really impressed. Greetz from Küps, Northern Bavaria, Germany.

@ronaldnepomuceno2970 2 жыл бұрын

This video is so detail and very well explained, a big thumbs up for you two, wish you success for your channel =)

@frugaldiy1 2 жыл бұрын

Ronald, thank you! I truly appreciate your kinds words and well wishes. Merry Christmas to you and your loved loves.

@clasesinformatica3852 3 ай бұрын

Tu vídeo ha sido un trabajo detallado, específico y muy bien explicado, sobre todo, haciendo hincapié en detalles muy importantes tanto en el montaje y desmontaje. Muy bueno, me ha servido mucho. Estoy en el proceso de reparación de un compresor de un w203 y tus explicaciones me han servido para intentar hacerlo por mí mismo. Muchas gracias por tu tiempo. Saludos desde Valencia. España.

@eranomanahan9118 2 жыл бұрын

Thank you for this so informative video. I was able to replace the AC compressor clutch without the need to bring to the shop to remove the refrigerant. My 1997 Camry has rusted bolts that I could not remove the lower bolt of the thermostat housing. I was afraid to force it because before doing it, I broke the adjusting bolt of the fan belt due to so much rust. I moved the compressor to the best position I could aware of not to let the wirings to the magnetic coil rub with the thermostat housing. Because I have no one to hold the tongue and plier while removing the 10mm center bolt, I used a vice grip and clamped tight a portion of the pressure plate to prevent it from rotating. I positioned its handle against the wall (see the photo). By hammering the handle of the torque wrench, I was able to remove the center bolt. The other harder one was the removal and replacement of the snap ring because I could not see clearly the holes where I should place the tool. My cellphone camera guided me to that. THANK YOU ONCE AGAIN, MY CAR IS COOL AGAIN.

@frugaldiy1 2 жыл бұрын

BRAVO! Well done, my friend! I'm impressed with your ingenuity and dogmatic approach to the project. YOU don't give up and that's impressive and rare. Much respect! Wait til I tell sister; she'll be impressed too. I just love people like you who find a way to achieve the task at hand and improvise. I'm over the moon that the video helped you and got your Camry cool again. What and awesome story. Thank you!

@paulkennedy5822 22 күн бұрын

You two are the BOMB! Great video!!!

@thereckchanic4709 4 ай бұрын

Now this is real shade tree mechaning by two knowledgeable ladies. If you two can do it anyone can do it.

@interceptorm5 5 ай бұрын

Briliant tutorial ladies! Very clear, detailed and informative. Thank you very much.

@frugaldiy1 5 ай бұрын

Thank you so much, and you're welcome. ;)

@jonahshupert1329 2 жыл бұрын

This video is simply awesome! I am truly impressed! Keep up the good work and great videos. Hope you ladies have a great day! Thank you@

@frugaldiy1 2 жыл бұрын

Jonah, thank you for taking the time to leave such a lovely and thoughtful comment. Your words of support and encouragement mean a lot to me. Happy DIYing!

@jasonlangmead8418 2 жыл бұрын

Great video , very informative with no babble . Subscribed . Thanks .

@frugaldiy1 2 жыл бұрын

You're welcome, Jason, and thank you for taking the time to leave such a nice comment. Welcome to the channel!

@billbearback2591 11 ай бұрын

enjoyable presentation , i love your work ,thanks for sharing , cheers from down under

@angusmcpherson Жыл бұрын

Great video! I was never bored and it easily held my attention. My car needs a coil, which i couldn't find (salvage yard, no thanks), so i had a nearby shop replace the entire compressor $983.15...ouch😮

@frugaldiy1 Жыл бұрын

Thank you, Angus. That's kind of you to say. Yep, ouch, on the cost. Sorry you had to shell out that cash.

@wallacetom1 2 жыл бұрын

Excellent video. Well done by professionals

@frugaldiy1 2 жыл бұрын

wallacetom1, I truly appreciate your kind words. They mean a lot to me. A little bit of determination and a Toyota shop manual, and you can't go wrong. :) Happy DIYing!

@thomascronin1040 7 ай бұрын

Thank you to you two professors, from KZfaq university for this classroom instruction! Very informative!

@frugaldiy1 7 ай бұрын

Thank you, Thomas. You made my night. Professor Frugal ;)

@alexstephens3765 4 ай бұрын

Great work Laadies. Many thanks for the excellent presentation.

@frugaldiy1 4 ай бұрын

You're welcome, Alex, and thank you. ;)

@YamahaC7SRG Жыл бұрын

Very helpful!! Thanks for taking the time to make and post that!!

@frugaldiy1 Жыл бұрын

Glad it was helpful!

@markwest-ck3gs 11 ай бұрын

Great video...great step by step explanation. THANKS

@andrelane37 Жыл бұрын

Very informative demonstration, Thanks Much!

@davida871 10 ай бұрын

Very thorough explanation and rebuild. Thank you

@frugaldiy1 10 ай бұрын

Thank you, David. ;)

@sullym6126 4 ай бұрын

Only vid that shows everything!!!

@kukula.i 2 жыл бұрын

Thank you for creating this awesome video. Managed to fix my Toyota Prado! All the best

@frugaldiy1 2 жыл бұрын

You're welcome, Igor. Isn't it satisfying to fix your own stuff? You saved soooo much money. Job well done, Igor! Enjoy the AC!

@kukula.i 2 жыл бұрын

@@frugaldiy1 Yes indeed. Well I haven't put it together yet (waiting for my bearing to arrive) but it should be OK. Thank you once again from Australia

@frugaldiy1 2 жыл бұрын

You're welcome from the USA.

@oceanventure 2 ай бұрын

This video will certainly help many people and very informative. My only concern was the price you paid for the bearing. There are many knock offs out there. So buyer beware. 👍

@alfredbernal8603 2 жыл бұрын

Great detailed informative video! Thank you so much for your time & video.

@frugaldiy1 2 жыл бұрын

You're welcome, Alfred, and thank you so much for the nice comment. I hope the video helps you with your AC.

@normrodriguez9306 Жыл бұрын

Thanks for the video, it helped alot! I couldn't fit the 3 jaw puller ... but a 2 jaw worked fine!

@frugaldiy1 Жыл бұрын

That's great to hear. I'm glad the video helped you, and you're welcome. ;)

@dahaze140 Жыл бұрын

Very detailed! Excellent! Thanks a bunch!

@frugaldiy1 Жыл бұрын

Thank you, Rob, for your wonderful comment and for taking the time to write it. ;)

@juvillace22 3 ай бұрын

Respect for you ladies 😊

@yellowboi4920 Жыл бұрын

Great video, helped a lot with the same repair on my Miata :)

@frugaldiy1 Жыл бұрын

Thank you for the nice comment, Jonathon. I'm glad the video helped you.

@dennismcbride5603 2 жыл бұрын

Very nice video. Not too technical but very informative !!

@frugaldiy1 2 жыл бұрын

Thank you, Dennis.

@theunsoupharak7850 11 ай бұрын

I learn a lot from this video thank you

@matthewlynch3761 2 жыл бұрын

A+ tutorial. Amazing. Thank you!!!

@frugaldiy1 2 жыл бұрын

You're welcome, Matthew. Thank you for the kind words.

@aligoode6061 Жыл бұрын

Thank you very much, I am doing this and was wondering about the tangs!

@frugaldiy1 Жыл бұрын

You're welcome, Ali. Glad the video helped you.

@BellyUpFish 2 жыл бұрын

Man, I love seeing a woman do stuff like this.. Can't wait to show my daughters. :)

@frugaldiy1 2 жыл бұрын

BellyUpFis, that's one of the best and most meaningful comments I've gotten on my channel. Thank you for that! I hope either watching their Dad fix the AC or watching my video inspires your daughters to DIY and become independent young ladies. Please tell your daughters, I'll be looking for their KZfaq DIY videos in the near future. :)

@lorijones9271 5 ай бұрын

great video ladies ,explained everything very well

@frugaldiy1 5 ай бұрын

Thank you, Lori. We appreciate that. Good luck on your project. ;)

@orlandomah1186 2 жыл бұрын

Great job, awesome detail explanation. We need more female mechanics 😊

@frugaldiy1 2 жыл бұрын

Thank you, Orlando. You made me smile!

@thesilentonevictor Жыл бұрын

I am a hvacr tech mine is bad on my swift I have to remove the compressor to give to someone to get it done since it s hard to get i am from the Caribbean Great video if I could get it myself with this video I know I can get it done thanks so much love from st lucia chill water tech

@frugaldiy1 Жыл бұрын

That's a BIG bummer, neilvester victor. I'm sorry to hear that. I wish I could help you. Thank you for the nice words and much love back from the USA! I mean that. We're all more alike than different, and us common, normal folks are the only ones with any common sense, and, hopefully, moral compasses. ;)

@insonh21 3 ай бұрын

great work ladies

@orlandomyles1350 2 жыл бұрын

Wonderful video, very informative I really learned alot. Thank you

@frugaldiy1 2 жыл бұрын

You're welcome, Orlando, and thank you for the lovely compliment! That was a fun project for my sister and I.

@orlandomyles1350 2 жыл бұрын

@@frugaldiy1 great, I hope it help others as well, it shows me how to do my 2000 toyota levin l. Again thank you

@frugaldiy1 2 жыл бұрын

Orlando, you'll save a lot of money if you do the work yourself, and you'll likely do a better job than a shop would. I'm rooting for you!

@andyduomo9229 Жыл бұрын

Sisters....you knocked it out of the park!

@frugaldiy1 Жыл бұрын

Thank you, Andy. That means a lot to us two sisters!

@diyferi 8 ай бұрын

Thank you, very informative video

@ggarrickk4455 Жыл бұрын

lady great instruction and trainer, women might be better that men at repairing because the motherly care they take not impatient muscle, immediate like and follow

@frugaldiy1 Жыл бұрын

LOL! GGARRICKK, thank you for taking the time to leave such a thoughtful and nice comment. It means a lot to me. Welcome to the channel!

@Silveready1 2 жыл бұрын

Excellent video thank you for going to all that effort! quick question: was the A/C still getting cold with the noisy bearing or did it stop functioning altogether?

@frugaldiy1 2 жыл бұрын

You're welcome, and thank you. The A/C was operating just fine and blowing cold.

@Doviruses.existbaileyonodysee 2 жыл бұрын

What a great Tutorial. 👌 So many good tips along the way as-well. Although i snapped the bolt on mine 😅. I'm wondering if it was red loctite on there or, the way i clamped it with plumber grips. Anywho. Subscribed !😁

@frugaldiy1 2 жыл бұрын

Thank you, Pro choice, for the kind words. I'm sorry to hear the bolt snapped on you. That's tough to deal with. If it had snapped on us, I would have gone to Pick-n-Pull, a salvage yard, and just pulled an entire AC compressor, rebuilt it (internal seals too) and put it on the car.

@Kyrin16 7 ай бұрын

She explained everything perfectly.

@frugaldiy1 7 ай бұрын

Thank you, William. That's so kind of you. ;)

@musclehead1716 2 жыл бұрын

i wasn't sure or how to do this procedure, i am amazed on how easy it was for the both of you to do this. I feel confident I can do this now. Thx a bunch.

@frugaldiy1 2 жыл бұрын

You're welcome, Muscle Head. It's not that complicated at all. Sister and I had a good time doing the project.

@DestilatorNo1 Жыл бұрын

Great and useful video. Thank you for the tips.

@frugaldiy1 Жыл бұрын

You're welcome, DestilatorNo. Thank you for your nice comment. It means a lot to me. Merry Christmas!

@williamb454 Жыл бұрын

Dayum all ya'll are good!! I'm impressed!!

@frugaldiy1 Жыл бұрын

William, you warm my DIY heart. That's so kind of you to say. I'll tell Sister and that will make her night. We're just your average DIYers who like fixing stuff and saving our hard-earned money--just like you.

@dannym5987 2 жыл бұрын

Good job Gals 👍

@frugaldiy1 2 жыл бұрын

Thank you, Danny! That means a lot to us--truly.

@randyloose6131 Жыл бұрын

Nice video; I am in the process of trying to order a bearing for my AC in my 2002 Ford Ranger with a 3 L engine.

@frugaldiy1 Жыл бұрын

Thank you, randy. Good luck on your project.

@listinglosangeles7245 2 жыл бұрын

Great job ladies!

@frugaldiy1 2 жыл бұрын

Thank you, Eddie. We deeply appreciate your kind words!

@paulmohney5715 2 жыл бұрын

Local shop said $700 cause parts weren't available, Liar, Liar Pants on fire. Nice work looking fwd for more. elegant simplicity

@frugaldiy1 2 жыл бұрын

Thank you, paul. That's a nice thing to say. Re the local shop, yep! You see you can DIY and save a bunch of your hard-earned money. The parts are plentiful.

@paulmohney5715 2 жыл бұрын

@@frugaldiy1 I have a garage full of tools, It just chafe's my hide when people lie to me. And why? a good mechanic could prolly do this in an hour, or less and not need to go through all the hassle of changing out a compressor. and now losing a customer's trust.

@frugaldiy1 2 жыл бұрын

I agree 100%, paul. That's why I fix my own stuff. At my age, close to 60, I've fixed enough stuff and been ripped off enough to know better and have no patience for it. Every person in every profession can earn money the honest way, but few do. They're out there, for sure, but hard to find.

@paulmohney5715 2 жыл бұрын

@@frugaldiy1 ever watch South Main Auto? Eric O is an inspiration

@frugaldiy1 2 жыл бұрын

No, I haven't. Thank you for telling me about the channel.

@goodstory5890 Жыл бұрын

Awesome ladies 🥰, great job 👍🏼. Thanks and Aloha 🌺

@frugaldiy1 Жыл бұрын

Thank you, Good Story. Your words mean a lot to us. :)

@enriquelopez9124 Жыл бұрын

Awesome information/tutorial

@frugaldiy1 Жыл бұрын

Thank you kindly. That's nice of you to say.

@oguzartun2099 2 жыл бұрын

Very detailed and perfect,thnk you

@frugaldiy1 2 жыл бұрын

You're welcome, oguz. Thank you!

@victorebolum1583 Жыл бұрын

Excellent teachers. Thanks

@frugaldiy1 Жыл бұрын

Thank you, Victor. I'm grateful for your thoughtful comment. It means a lot. ;)

@phuonglam8192 Жыл бұрын

good job. I think the hardest part is to remove the snap ring I also saw it looks like the plastic timing cover had broken😀

@frugaldiy1 Жыл бұрын

Thank you. Yep, the snap ring is a bit of a struggle. Good luck on your project. ;)

@thecuss6817 Жыл бұрын

A few years ago I removed an AC clutch shim to repair my 1998 Frontier AC without unbolting or removing the compressor (AC clutch was slipping, intermittently). I didn't even need to remove the AC belt !!!

@robert1408 11 ай бұрын

Really clear and concise and great video!! You and sister can work on my car!! lol No really Thank You!!!

@ibn_aldhim 2 ай бұрын

Good job lady 👏🏻

@frugaldiy1 2 ай бұрын

Thank you, Sir. ;)

@mikedougherty9165 2 жыл бұрын

outstanding job

@frugaldiy1 2 жыл бұрын

Thank you, Mike. Your comment means a great deal to me, particularly today, when I question what the heck I'm doing on KZfaq. :)

@fahimhasnain 2 жыл бұрын

bravo ladies....great tutorial...superb... probably I wana do same on my Chevy trailblazer 2008 but my case basically Compressor jammed/locked and now bearing started grinding noise.. may be I will have to to replace both Compressor & pulley... ... Regards Fahim Pakistan 🇵🇰

@frugaldiy1 2 жыл бұрын

Thank you, Fahim. That's very kind of you to say. I'm not sure what you mean by the compressor jammed/locked, but maybe consider just replacing the clutch assembly (which includes the bearing). I hope it all works out for you, Fahim.

@tomcole4736 Жыл бұрын

Great informational video

@frugaldiy1 Жыл бұрын

Thank you, Tom.

@LongIslandsHardcoreDetectorist 2 жыл бұрын

Thanks for this 👍🏼

@frugaldiy1 2 жыл бұрын

You're welcome, Long Island. My sister and I had a fun time on the project. Happy DIYing!

@headhoncho4890 2 жыл бұрын

Automatically subscribed very well explained and video is easy to see

@frugaldiy1 2 жыл бұрын

Reccardo, I can't thank you enough for the kind words. I hope the video helps you. Thank you for subscribing to my channel. Merry Christmas to you and your loved ones.

@joaocastro7046 Жыл бұрын

Excelent explanation.

@frugaldiy1 Жыл бұрын

Thank you, Joao.

@augustinlec 10 ай бұрын

Hello, very nice explanations from your end, do you know why these spacers are used for ? Is there 2 of them ? i changed the glutch without taking care of it and now, fuses are burned everytime i plug the glutch ...

@NEPTALIDOM 11 ай бұрын

I love this video

@bjbeagles9119 Жыл бұрын

Very good video ladies, fantastic....job BJ

@mikhailvershinin2292 2 жыл бұрын

Awesome video I’m just gonna buy the entire clutch kit so I don’t have to beat that bearing out

@frugaldiy1 2 жыл бұрын

Thank you, Mikhail. I don't blame you one bit for replacing the whole assembly. The job will go quicker if you do. Good luck on the project.

@aygwm Жыл бұрын

Great video!

@frugaldiy1 Жыл бұрын

Thank you! ;)

@bacaluiry929 Жыл бұрын

Pretty nice job !

@frugaldiy1 Жыл бұрын

Thank you.

@antoniotroncoso8232 Жыл бұрын

Step by step process, thank you so much for explaining it very detailed I didn’t know how to do this job but thanks to this video and for sharing your knowledge now I know. Definitely I will marry you 😉

@frugaldiy1 Жыл бұрын

Antonio, I have complete confidence in you that you can do the job well! As to the marriage proposal, the last guy who proposed to me on this channel, called off the wedding the next day because the pilot light on his water heater went out again the next day. Bummer! I'm still getting over that. LOL ;)