Mike's using my usual work benches, which you get to when your single and there is a new dog in a crate behind him. Nope it's Miss Lola who's been refurbished and looking wonderful. I'd put money on it running and this is a cliff hanger or Randy has to wait for the insurance money to rebuild the shop after the fire. Fun video as always. Thank you.

Check the pressure at the warm up regulator. It controls the richness of the mixture. I've worked on countless Porsches, BMWs, Volvos and Audis running the old Bosch K jet. I always start with checking the system pressure and control pressure!

Yay! Mike left all of us with a Cliff Hanger!🙉🤣

Uh, yeah Mike. You're doing this on your stove in your KITCHEN!!!!?????? You're funny. I love it. Been there, done that. Rebuilt a 302 Ford engine in a bedroom of a second floor apartment.

Crud mike a cliff hanger omg 😱 it’s killing me I just want to see you do the happy dance after it starts a well till the next video 🎉

Lola does look good. We do the same haircut to our 16 year old toy poodle. Just shave him completely. We try to hold out for the summer cause winter it is better to have him with long hair to keep him warm

Heyyyy Mike, pleaseeee do that 3 item check list they do, like check the Air, the Spark and the fuel to see which area needs fixing? Take a plug out, put the boot on and turn the key to see if it sparks. When you lift the fuel distribution system does it spray fuel in that big throttle body unit? 🤔 Ohhhhh I want this car to start so baddddd

Thank you so much for going step by step to get all of this for us.

I guess I'll have to wait....not happy about it...but I'll do it!!!!! FINGERS CROSSED!!!

Mike looking forward to a successful end on your Mercedes. Hope you get it going. Because of your love of these cars. Blessings!

Minxy Mike - leavin us a hangin on there....

I’ve been anxiously waiting to see more progress on this car! Loving it!

I used the liquid moly on my 94 red block volvo! Thanks for the repair video!

If it did start, I would give you an A+! Most of the time, the fuel distributor rebuild is not successful. It takes a major rebuilder to successfully rebuild them. Many MB, BMW, and Rolls Royce/Bentley owners use CIS Flowtech in Alabama .

Using a flammable liquid in a ultrasonic is not always good practice. Ultrasonic cleaners prefer being filled to top level or it can damage transducers.

Thanks Mike A+++++++++😎😎😎😎

Hey Mike good luck good to see you again buddy see you soon. In the next videos

That fire needs to make it into the intro clip 😁😀😃

Great work and thanks for sharing this with us take care

Mike likes bubbles in his nooks and crannies.....

Great work😎👌🔥🔥

I can finally see your teespring store thingy under your videos!

After like 120-150k miles it's better just to replace the fuel injectors the little spring inside eventually wears out so there's no point in cleaning them. Also take into to consideration the age of most of these cars is 30+ yrs so alot of parts have to be replaced or rebuilt

Noooooo the video ends at the right moment oh come on Mike. Great content

Thanks 😊 for video 📹

Wow everything was filthy! Hopefully it starts in the next video!

Lola all groomed looking super stylish and cute ❤️😊

I love a cliffhanger...

Yup will start

Mike your making Kent jealous.

You guys are pretty funny. Reckless, but funny. As I watched, I said out loud, "Check the EHA!". Never saw it happen, so here's a suggestion. A quick EHA test can be done with a 9 volt battery, by touching the 9v battery terminals to the contacts on the EHA, you should hear a "click" in the EHA. Try a few times. If you don't hear the click, (assuming you used a good 9v battery!) replace the EHA. Good Luck and please, be careful! I suffered gasoline burns when I was foolish and young. You're out of excuses.

I stuff spinning before the video ended you two!!! 🎉🎉😂😂

Just wanted to stop by and say love the content keep up the good work 👍🏼

Love the name Disco Inferno

Maybe its to lean, try adjusting the mixture screw

This is what you call a tease lol 😆

Thanks for video..

The doggo do be zooming 😂😂😂

"Piece de resistance" is not the term you want to use, Mike. 'Resistance' to fuel flow is your problem! A cliffhanger? How could you do this to us?😱

A relatively short video with a cliff hanger? Ok it won't start! I've read some good guesses in the comments. Maybe ask John to come over, also to have a look on 'Diese', because I expect it to cause trouble, too 😁😁

Bosch mechanical fuel injection probably set back fuel injection adoption by 5 years.

I don’t appreciate you teasing us like this. 😂😂😂😂

Cliff hanger might have been "Does it start, or catch on fire again?"

Darn, I thought they were goodies for Lola.

Lola looks beautiful

The towering inferno burn baby burn disco inferno.

It must be good being single when you can set at your kitchen table and work on car parts. Lola looks great.

Some cars are just stubborn but you should know this 😆😅🤣😂

When Randy was laughing, I thought he would have said, "Hey why not get a gas drenched rag to see if that will help?", lol lol lol

After you can use the ultrasonic cleaner to cook a chicken

Yayyyy ultrasonic cleaner!

Lola is like what dat ultrasonic sound iz can hear?

Oh nooooo I hope it starts 😭

You can't end a video like that? OK I'll wait one more day.

Unfortunately fuel distributor rebuilds rarely go as planned without sending it off to CIS rebuilds. There's a lot going on with those KE systems. Too many critical parts and adjustments. Good luck with it. Old KE systems are similar to the Whack-a-mole.

Hey Mike … Good day everyone…

Oh no Mike...it doesn't start 😂

Mikey, Mikey, Mikey, 🤦‍♂️🤦‍♂️🤦‍♂️ 💊💊💊 👍🏻👍🏻👍🏻

Cleaning car parts in the kitchen? That's awesome! My wife would keel me if I did that though. Keep up the awesome videos. So fun to watch!

Job on everything else is good..

Saw a youtube on a 230ce 1990 had same problem would not idle ran rough just changed firing order that dame thing was running on 2 cylinders bad distributor cap incorrect firing order.Check it out Mike

Funny my phone just opened this video while I'm my pocket

Hey my friend.

You need a shop bro.

Hi Mick just have rebuilted my 560 sel fd but after i install it in places and jump the fuel pump relay the fuel is fountaining from all 8 channels. Any idea what i have done wrong?

Hey Mike, you should call it the monkey layer😄

Are we dealing with possibly a bad fuel pump relay at this point?

Rumor has it a man went to a local Tulsa dog groomer with a charred dog and had it trimmed...coincidence??

When You will show diesel W210?

I put a can in the tank every 6 months

Mike not going to give you any advice this time around just looking forward to the next update on this car 👍🏻

Whats up my brother are you good

How was terre haute

MIKE,, try to buy mercedes CDI diesel start year 1999 , not TDI diesel

At first, those injectors CAN NOT be cleaned you just lost your time, they are simply being replaced! Second, don't let that old trader lying to you! For the money you pay him for the "tester" you will buy brand new injectors which you will replace after 100k miles. As for the distributor, the plunger goes back very slowly. Good luck!

Ugh cliffhangers why

👏👏👍👍👊👊🏆🏆🙏🙏

😢

You tease.

😢😂😂

Mike, really like your videos but the background music is annoying. Sorry but I don't like it.

well that was a waste if time

You just wasted my time...thanks...

Hey Mike your doing fuel without Randy.

Mike not going to give you any advice this time around just looking forward to the next update on this car 👍🏻