Fuel filter and Fuel pump service. BMW R1150GS.

Рет қаралды 8,819

Күн бұрын

I don't profess to be a mechanic by any means. My video is here to help and hopefully guide. Hopefully it will inspire you to get your overall on and get you out to your garage.
Hedingham sidecar. I do love getting my hands dirty. 🏍👍🏍
I may have to as I am out of blue gloves.
GoPro Hero 9 Black
Sony FDR-AX53
SanDisk Extreme Pro
GoPro Hero 5
GoPro Session
GoPro Session 4
Apple MacBook Pro- I Movies

Пікірлер: 30

@motherduckGSA 2 жыл бұрын

Brilliant 🤣 Good vid Fyi Fuel filter on first Then very thin smear of rubber grease on pump housing nozzle and the filter nozzle anc the u tube pops in place toot sweet 🤩 Well done 🍺🍺

@motherduckGSA 2 жыл бұрын

Brilliant 🤣 Good vid Fyi Fuel filter on first Then very thin smear of rubber grease on pump housing nozzle and the filter nozzle and the u tube pops in place toot sweet 🤩 Well done🍺

@brianharper9798 2 жыл бұрын

Excellent, and I'm sure my neighbor's were just as thrilled as yours as I set off for work at 6:30 this morning.

@the_mad_leprechaun 2 жыл бұрын

Ha ha ha well done! I know when I take any of my bikes out at 4 in the morning it hard to be quite! Take are Brian!

@ChrisyC567 2 жыл бұрын

Excellent vid murt, I enjoyed that one... 👍 More Tasks please... Thats a very funny clip at the end too mate.. 🤣

@the_mad_leprechaun 2 жыл бұрын

I shall do my best! Thanks mate!

@Armandinho8 2 жыл бұрын

Nice video... thanks for sharing the knowledge.👍

@the_mad_leprechaun 2 жыл бұрын

You are welcome! Glad you enjoyed! Appreciate it! 🏍💨💨

@toastymuncher Жыл бұрын

Hi, I bought the spare pump from you. Thanks for the vid, very useful indeed.

@the_mad_leprechaun Жыл бұрын

Glad I could help! 😁🫡

@gapexx 2 жыл бұрын

Thank you!! I am just wrestling with my 1150 tank as I need to strip it for painting. Very much appreciated.

@the_mad_leprechaun 2 жыл бұрын

Ah you are welcome buddy. I make videos, I put them out there for all to see. Some think my videos are funny, (a joke) it's nice to know that someone is looking and finding some help from them! Good luck with the paint job! 🎨

@gapexx 2 жыл бұрын

@@the_mad_leprechaun Oh yes, very entertaining :D I would send you a glove or two but I think I am down on the pack myself🙃

@the_mad_leprechaun 2 жыл бұрын

@@gapexx ha ha ha 😂 my channel sponsor bought me some! Aka my wife!!

@archontismichailidis2614 Жыл бұрын

Bravo very good job.

@the_mad_leprechaun Жыл бұрын

Thanks very much! Glad you enjoyed! Happy New year! 😁 👍

@chrisscanlan7703 2 жыл бұрын

Well done on the gloves.

@the_mad_leprechaun 2 жыл бұрын

I am out of gloves!!! 😆

@davidgreen424 2 жыл бұрын

The U tube would be pressurised from the fuel pump so I don't see how it would deform inwards. Good video still.

@ssdwired3163 2 жыл бұрын

Thank you.

@the_mad_leprechaun 2 жыл бұрын

You are welcome! Hope it helped! 😁👍🏍💨💨

@MrJamiedineen Жыл бұрын

Great video. about to reassemble my tank and my clymer manual didnt have the tip about the flat edge of the mounting flange. Does it matter which way the interior vent pipes are hooked up? Also wasnt careful enough when disconnecting my fuel lines and didnt mark which one goes where...is there way to know which way the fuel limes connect if you've made this mistake?

@the_mad_leprechaun Жыл бұрын

Thank you very much James. Glad my little video was able to help you! Not sure about the fuel lines. It’s been a while and I don’t actually own an 1150 anymore. 😂 Sorry. Safe travels, good luck with your project! Murt 🏍️💨💨