We thank you for your interest in our help videos. Unfortunately, due to limitations in KZfaqs comment sections, we are unable to quickly answer questions in the comments. Please feel free to contact us directly here: www.generatorguru.com/need-help/
@tercodeGremorgm-c3o29 күн бұрын
Mine is also broken His memorable works of 18 years is enough
@Generatorguru18 күн бұрын
Thank you! *Blush
@bpccmath251calculusiihitch44 жыл бұрын
Pro tip to Generator Guru: If you want to drive more business to your website, ya may wanna think about inserting your web address in the "description" box so interested parties can click on it.
@Generatorguru4 жыл бұрын
Hi there Thanks for the pointer, I'll get our web guys on it!
@bpccmath251calculusiihitch44 жыл бұрын
@@Generatorguru You are most welcome.
@ndubuisimbano90422 жыл бұрын
great job
@Generatorguru2 жыл бұрын
Thanks! :)
@sandyshoremann75244 жыл бұрын
Who made these garbage petcocks? My Original part on a med duty residential Generac lasted about 3 years and then crumbled into dust. Chinese pot metal handle? of course I just filled my tank when it broke! Fuel lines are like wood also. Garbage parts and near criminal as they are a fire safety concern. Rant over Thanks Generator Guru for the How to video Ill be installing my new replacement part soon.- Sandy
@engineeringdept.generatorg17604 жыл бұрын
Hi, My name is Pat and I would like to answer your questions. Thank You
@engineeringdept.generatorg17604 жыл бұрын
Hi Sandy Was this petcock provided by us?
@sandyshoremann75244 жыл бұрын
@@engineeringdept.generatorg1760 Oh no, not at all. Sorry for the confusion. Stock O.E. part on my Generac GP5000. I just picked up a new one from my local ODPE dealer. Got to keep the Brick and Mortar stores with locals guys in business and working you know! Thank you, and sorry again for the confusion! - Sandy
@garywellings22816 жыл бұрын
Busted handle seems typical..looking for a quality shutoff. Any suggestions?
@engineeringdept.generatorg17606 жыл бұрын
Thank you for contacting Generator Guru! We would very much like to help you find the parts you require, but need a bit more information before we can proceed with your request. Please can you tell me the Make and Model of your generator? If you are unable to give either the make or model code, you can send us a picture of the generator from the front and the back, and of the part you require. With this our Engineers would be happy to identify it for you.
@tomwarren5258 Жыл бұрын
I’ve got a triplex 9200 generator compressor welder leaky Pitcock was wondering what size it would be
@Generatorguru Жыл бұрын
Yes we do hold the Triplex Petcocks in stovk. You can buy it here: generatorguru.com/fuel-valve-petcock-female-fitting-192233/
@tomwarren5258 Жыл бұрын
Are all those petcock valve about the same for the generator same size
@Generatorguru Жыл бұрын
No, unfortunately they are not. But we have many listed on our site, and can get others if not listed. Please search your generator on www.generatorguru.com or contact us via the website and we will be very happy to assist you. :)
@mannymix12744 жыл бұрын
I have a cpe 2000 gas inverter I ordered a petcock valve and it was the wrong size mines of a 19mm hex nut the one I ordered was 22mm I’m having a hard for the 19mm not sure what the thread size is any help?
@Generatorguru4 жыл бұрын
Hi Manny We do have a petcock with a 19mm hex but I've not come across it on an inverter generator before, can you send us a photograph of the original, I just want to check it is the same?
@nairbnocraza97823 жыл бұрын
i bought a shut off valve replacent that cam with a hose do u cut the other end
@Generatorguru3 жыл бұрын
Only if you need to. :)
@redroofretriever6 жыл бұрын
I have an older Cambell Hausfeld 5000w generator, fuel leaking from the bottom of the plastic tank shut off valve. The valve is black plastic with a red turn knob. All my search shows this is obsolete part. Do you know of a replacement available? Model #GN501200AC.
@Generatorguru5 жыл бұрын
Hi there I'm not aware of anywhere that holds the replacement but its not a part that we have been asked for in some time so some of our competitors may have found the part in the mean time
@jeffreysikita3994 жыл бұрын
what is the part number and thread size on the replacement fuel petcock tap valve?
@Generatorguru4 жыл бұрын
Sorry we missed your question. Please look up the petcock you need on our website to match to your generator: www.generatorguru.com/ :)
@darrenmerrifield25665 жыл бұрын
Can i replace a carburetor with a solenoid for a regular carb on a titan 8000 generator?
@engineeringdept.generatorg17605 жыл бұрын
Hi there Yes, you can, this simply means that your generator has a simpler low oil shutdown mechanism by just shutting off the spark rather than the spark and fuel. You can simply wrap the solenoid wires around the bowl of the carb or cut the wires but do not remove the solenoid as fuel will flow from the bowl bolt
@alvarez8282able4 жыл бұрын
My Gp5500 does not drain the fuel properly....I disconnected the small fuel line from fuel filter and it literally drips with the generator on an angle. Also it runs for 10secs and shuts off! Can this be a bad fuel valve petcock?
@Generatorguru3 жыл бұрын
Please set up a ticket with our Engineers to discuss further as there could be a few reasons. (We do not charge for this service.) www.generatorguru.com/need-help/
@alvarez8282able3 жыл бұрын
That's exactly what it was after purchasing and replacing from generator guru parts new fuel filter, valve petcock with new fuel lines my generator is running like a champ! Thanks again!
@mjc35029 ай бұрын
I turn my valve on and no fuel will flow? Yes, I have has in it. Added a gallon and nothing will flow when I turn the valve on..
@Generatorguru9 ай бұрын
There is a filter above the petcock. It must need cleaning. :)
@mjc35029 ай бұрын
@@Generatorguru I'm doing it. Thanks.
@checkmybio-3 жыл бұрын
Not well explained. I didn’t get what I came here for
@Generatorguru3 жыл бұрын
Please contact our engineers via our help centre for 1-on-1 help. www.generatorguru.com/need-help/