Today the FULL build begins. All the body panels need to be removed to have clear access to the frame. F100 Series, F250 Front clip removed.
Пікірлер: 137
@bigbuck13185 ай бұрын
Been waiting 2 weeks. Missed your videos.
@CTmoog5 ай бұрын
Thanks man! Sorry for the delay. We got behind schedule last week. 😎
@Hotrodford5 ай бұрын
You haven’t missed much. I can come back to the channel two months later and he’s started another two or three projects without finishing a single one. I’ve come to the conclusion he’s just curious how things are assembled.
@user-ze2cu8yv8j5 ай бұрын
Hope this one doesn’t end up in the CT Graveyard as well! Was hoping to see the 65 Patina Beetle finished up! You’re so close brother!
@CTmoog5 ай бұрын
Me too! 😄This one should be up and running soon! =)
@bryco325 ай бұрын
I gotta introduce this channel to my wife. This bro's got a worse case of ADHD than I do with unfinished projects! :) Doh Squirrel ! Love ya CT! 💛
@CTmoog5 ай бұрын
hahha! =) its all good!
@johnbishop81095 ай бұрын
You never restore and finish any projects. What ever happened to the swamp find ford truck?
@andyhamilton89405 ай бұрын
Why I stick lawn mower projects 😮 I’m like you pal!😂
@anthonylatronica51085 ай бұрын
Strongly recommend the new wire harness as you are dealing with very old brittle wires. You don't want to do all the ,make the mechanical investments and have a fire after all that.
@CTmoog5 ай бұрын
Yes, I'm looking at them now...they aren't cheap...
@Pedroisanickname5 ай бұрын
CT in his best (teardown) mode. 😂 Cheers!
@timpatrick19915 ай бұрын
Do you ever finish a project? Started the 67/72 truck project, what happened to swamp dragon?
@Wrencheasy5 ай бұрын
I’ve got a 70 f250. Had to completely pull the totally rotted core support and replace. Watching you pain through some of the front end I felt the frustration. You’ve got a lot of work ahead but I’m excited to see the progress. These are cool trucks
@CTmoog5 ай бұрын
Yes, it's bit tricky getting those rusty bolts out. Love these old trucks! =)
@cntrystud365 ай бұрын
He knows how to pull the trucks apart and throw them in a corner somewhere. Still waiting on the resurrection of the ford you took in two or three years ago? What ever happened to it?
@Tech_4814 ай бұрын
Exactly
@fishaussie91125 ай бұрын
🇦🇺👍time to push this one aside with the other ones and find another project
@vintage76vipergreenBeetle5 ай бұрын
😅👍 He looking for another project as I write this comment.
@4x2WagonFamily5 күн бұрын
Good content. I just bought a 71 f250 and your video helped immensely. Looking forward to your other vids… Subscribed.
@NoName-jr2eo5 ай бұрын
Question: Do you ever complete a project????
@matsnewo73795 ай бұрын
Bolts with slits in them are. Self taping. After. Thier removal can b replaced. With standard coarse thread. The self taping. Are used for initial assembly.
@vinceweir58035 ай бұрын
Another ford truck to never finish prove me wrong
@CTmoog5 ай бұрын
This is the 3rd F250 on this channel. The first one was a 1972 F250 my brother and I pulled out of south Georgia about 7 years ago. I replaced the carb, distributor, brakes, exhaust, tires, etc...ran and drove great. Lots of videos on that one. The Swamp Dragon had some issues that might not be worth bringing back money wise at this time but we can use some of those parts on this one like the engine! =) ....This one "Big Reg" or "Red Dragon" will be up a running soon. Stay tuned!
@jeffhardman46875 ай бұрын
@@CTmoog Wait... Are you saying the Swamp Dragon is dead? No chance of finishing? I've been waiting for so long to see it come back. Major disappointment if this is true.
@samuelgarcia56475 ай бұрын
I think CT knows exactly what he's doing...stay tune...
@Hotrodford5 ай бұрын
You’re joking right?
@brilog695 ай бұрын
What ever happened to the 65 beetle? Did to sell it? Your shop truck is cool but the beetle is Kooler!
@CTmoog5 ай бұрын
I still have it. Trying to get a title for it so I can drive it around a bit. Needs a few things but it's basically done and ready for the road.
@SanDiego_VDubLife5 ай бұрын
As soon as you finish taking this one apart you can get started on the next new project. Can’t wait to see what the next one is. 😂 taking bets now on, will CT ever finish a project. Just giving you a hard time CT. Hopefully you can prove everyone wrong😂. It ain’t easy, I have taken a break from my bus project cuz of school. Hope to get back at it soon though. Gotta replace my front leaves.
@CTmoog5 ай бұрын
I have mutable videos on rebuilding the vw front beams. I hope those help. Good luck on your project.
@CharlieNagoo5 ай бұрын
multiple
@SanDiego_VDubLife5 ай бұрын
@@CTmoog yeah. I know what I gotta do. Just don’t wanna do it cuz taking out the leaves and replacing them is a hassle.😆
@nevilleeastough14965 ай бұрын
Pretty good at pulling things apart, Bloody hopeless at putting them back together again.
@Mikefngarage5 ай бұрын
Today these old cars are like chasing down the rabbit hole. Hey it looks ok then you tear one thing down, then another, Before you know it your replacing the whole truck.
@francoisbouchard6025 ай бұрын
Nice job cool truck Ford good show 👍👍👍👏👏👏👏❤😍
@CTmoog5 ай бұрын
Thanks 👍
@eugenebaroni12985 ай бұрын
Great job 👍 going to be a cool truck... Nothing like them old Ford's.
@J.JMcClure-wc9yh5 ай бұрын
You’re definitely getting there. Great job so far. I would suggest LMC truck for some of those replacement parts. It’s not factory but will definitely save time and labor.
@dolf10105 ай бұрын
Big step today 👍 Nice intermediate projekt until you get the parts for the the Targa . Can't wait to see more CT 👍
@CTmoog5 ай бұрын
Thanks man! 👍
@paulgrimm5 ай бұрын
Nice truce and clean fire wall
@muhammadarsalkhan40485 ай бұрын
Keep making videos CT we are always waiting for your videos
@CTmoog5 ай бұрын
Thanks my friend! =)
@muhammadarsalkhan40485 ай бұрын
❤@@CTmoog
@williamlee14295 ай бұрын
I'm surprised you couldn't hear us yelling while you were trying to get the front fender off, "Follow the wire back" lol
@dpose65255 ай бұрын
Missing the 65 Beetle. 😞
@CTmoog5 ай бұрын
Over 40 videos in the playlist on the 65 beetle - check it out =) more to come www.youtube.com/@CTmoog/playlists
@reader56115 ай бұрын
For those watching getting ready to do this, you avoid some of the struggles if you remove things front to back. Had the grille and then radiator support been removed before the inner and outer fenders things go smoother, and you don’t get half your front end wanting to tip sideways.
@tomdale13135 ай бұрын
thxs for sharing...
@CTmoog5 ай бұрын
Thanks for watching! =)
@Null7Mereel5 ай бұрын
also, you were WAY more nonchalant about the hornets in the headlight bucket than I would have been haha. I would have tossed that damn thing across the shop and come back with a torch!
@danielluma29485 ай бұрын
Check the King pins out if you don't want the front-end shakes when driving
@keithskustoms23114 ай бұрын
Dont mess with that fender, i would buy a replacement one.
@keithskustoms23114 ай бұрын
That is the factory steering box, they either used Bendix which you have there or the ford unit.
@ATOMSHAMRADIO5 ай бұрын
CT. buddy were you at we need a fix of tinkering on a sunday take care stay cool and safe👍😎
@user-dh3um6nd8s5 ай бұрын
i am not big on the rusty look , I like classic , but to each his own
@CTmoog5 ай бұрын
yes, it's nice if you can one with less rust but they tend to be a bit more expensive. This one is going to clean up real nice.
@Null7Mereel5 ай бұрын
those big washers on the body mounts act as shims to get your lines correct. I'd label which side they came out of so you know which side needed what shims. best bet is to replace the rubber mounts with poly ones, they're grease and gas resistant and overall last a whole lot longer.
@andyaguirre3455 ай бұрын
Its a very nice Truck . its in very good shape. please replace all the body mounts , and the radiator support mounts they are no good.
@CTmoog5 ай бұрын
Thank you! good idea! I will order them this week.
@andersaxelsson21965 ай бұрын
Awsome
@richardoswalt10095 ай бұрын
Lots of after market parts are available, NPD and Dennis Kirk, some very reasonable. Maybe swap dragon won't get a storage buddy ..😮
@alloutofbubblegum81655 ай бұрын
I've been telling a couple of the accounts that i deliver too about the channel.
@CTmoog5 ай бұрын
Thank you! =) I really appreciate that.
@eddierush84605 ай бұрын
Hi looking getting lots done. Are you going to use the AC Unit back on the truck ?
@CTmoog5 ай бұрын
Thank you! Yes, if it's still good I might use it. It gets hot here in Florida! =)
@vernondodson50675 ай бұрын
What happened to the swamp Dragon
@vintage76vipergreenBeetle5 ай бұрын
Will end up as a parts truck, for someone else.
@CTmoog5 ай бұрын
The heart of the Swamp Dragon will live on in the Red Dragon! =) F360 built & ready to install/ Stay tuned! =)
@vintage76vipergreenBeetle5 ай бұрын
@@CTmoog I was correct swamp Dragon will a parts truck for you, or someone else.
@ATOMSHAMRADIO5 ай бұрын
HEY BUD WERE YOU BEEN MAN STAY COOL🤙
@CTmoog5 ай бұрын
Hey man! Thanks for checking in! I've been busy working on this Ford FE 360 engine and I have a 2.0 Type 4 engine that Darrin build. Working on that as well. I should have an update video out soon.
@ATOMSHAMRADIO5 ай бұрын
@@CTmoog cool cannot wait 👍stay cool CT😎
@danielluma29485 ай бұрын
That right cab mount might need to be replaced, very easy to replace them same with cab corners inner and outers, replacement of these parts fit from 68 to 72 . I'm surprised you are not using a 390 motor instead of the 360
@paulman22705 ай бұрын
Great content as usual but what has happened to the Karmann Ghia and beetle rebuilds ?
@MS-fs5xu5 ай бұрын
Need some sandblasting love 😅
@jorgecampuzano24825 ай бұрын
Ojalá y esta si la termine. Por que la azul claro, nada mas la despedorro y nunca la vimos terminada 🤭
@S2NAZ5 ай бұрын
LOOK! A Squirrel! 😂😂
@svantte665 ай бұрын
where your sandblasting equipment is?
@307life95 ай бұрын
I would try either Denis Carpenter or CJ pony parts before LMC. Just saying. Jeff's bronco graveyard also.
@gordonmcdaniel77975 ай бұрын
Have u every finished a project
@vintage76vipergreenBeetle5 ай бұрын
He made video.
@balsachopper75 ай бұрын
Must have missed something. Why did you take the cap off as a unit, instead of piece by piece? You had it all loose.
@rickallen63785 ай бұрын
Where do you get exact replacement bolts for this?
@CTmoog5 ай бұрын
there are a few suppliers. google "F100 body bolt kit" . cjpony, lmc, Dennis Carpenter to name a few.
@HedigardiCardoso5 ай бұрын
Bom Dia Amigo tudo Bem aqui estamos bem graças A Deus
@handle6905 ай бұрын
The haters on here are making me scratch my head. Even teams of pro car restorers it can take over a year to finish just one project. CT is just one man in a garage. What is wrong with people.
@CTmoog5 ай бұрын
Thanks man! =)
@MaxGiganteum5 ай бұрын
If the so called "pro restorers" just got on it, they could often finish a project in a month. It all boils down to two things: proper equipment in a spacious shop and the application of man hours. Of course, I'm assuming a high level of actual talent as well. Best wishes! - Max Giganteum
@cyn28545 ай бұрын
🖤
@markamcampbell57955 ай бұрын
what happened to the swamp dragon?
@CTmoog5 ай бұрын
it's in the swamp! =)
@stevehill74855 ай бұрын
Can someone contact me when he’s putting one of the vw’s or Porsche back together! Got excited for him when he drove the chassis down the street and now nothing but testing the batteries in his impact? CT you’re losing us I think?
@TimsWorkshopTJY5 ай бұрын
When are you getting back on the bug?
@CTmoog5 ай бұрын
Tim, the beetle is basically done. The first drive video was uploaded months ago. Did you not see it?
@TimsWorkshopTJY5 ай бұрын
I don't think I saw it? Will go back and watch it
@TimsWorkshopTJY5 ай бұрын
I guess I did watch it😊. Love it so much I guess I just want more
@64KarmannGhia5 ай бұрын
@@CTmoogI think he asked when you are getting back to it. It’s not finished, just like everything else. Your content is fun to watch but it does get extremely frustrating when you don’t finish anything. It’s constantly bouncing around with no completion and your subscribers have shared their frustration. I have unsubscribed now as well. Best of luck to you CT
@vintage76vipergreenBeetle5 ай бұрын
@64KarmannGhia Well said.
@ATOMSHAMRADIO5 ай бұрын
CT i was thinking will the swampdragon cab fit to that frame iam curious. I forgot the Chinese new year is the year of the dragon that be cool to see the dragons cab on that frame 🤔 take care stay cool👍
@CTmoog5 ай бұрын
Yes, it might. I'm going to pull the Swamp Dragon's frame out of the swamp and clean it up. It might work! =) good idea!
@ATOMSHAMRADIO5 ай бұрын
@@CTmoog ive been scratching my head it should work it would look cool also the dragon was a camper to i figured i ask CT. stay cool👍💯⚡
@razzymarcus80445 ай бұрын
Is the chrysler imperial still on the burner?
@CTmoog5 ай бұрын
haha! no....that was my brother's car. he sold it last year.
@handle6905 ай бұрын
Hey CT, how would you get a body off a VW bug without a hoist set up like you have
@CTmoog5 ай бұрын
Why are you removing the body? Do you need to replace the floor pans? If you need to remove the body to work on the chassis it helps if you remove the glass, bumpers and doors to remove the weight. You can lift up one end at a time and use a jack to get it off the frame. You may need to remove the seats to give you move clearance to move the chassis out of the way. It helps if you have a friend or two as well to lift the body of the chassis.
@handle6905 ай бұрын
@@CTmoog Floor pans and everything else needs redone. I want to do a full chassis restoration like you did and keep the body patina like you do :) I've been studying cars for a few years now and think I'm ready to begin.
@e.mirach5 ай бұрын
When will the new porsche video come out?
@richarddavis30075 ай бұрын
Hope it isn't like swamp dragon
@keithskustoms23114 ай бұрын
Soak the parts in Evaporust, they will look like new
@danielstrachan89885 ай бұрын
😁👍👍
@CTmoog5 ай бұрын
Thanks buddy! =)
@fredsons22415 ай бұрын
Don’t listen to them CT
@CTmoog5 ай бұрын
Thanks buddy! =) it's all good. I have thick skin! =)
@lackodhr.53035 ай бұрын
🤗👍👌❤️💯
@rgbigdog5 ай бұрын
It cost twice as much to ship it than the price of the part.
@rongay68365 ай бұрын
Sins you are going to freshen up the entire engine bay with new or rebuilt components, I would suggest replacing the inner fenders, radiator support with aftermarket parts. You would be much happier.
@keithskustoms23114 ай бұрын
That radiator support is junk, as long as you have it off, replace it.
@diha54705 ай бұрын
What's the point if you can unscrew everything and remove old rusty metal sheets with the Flex, but you can't put anything back together. Apparently he doesn't know how to weld to finish a project. See Porsche 914. It's very rusty...lets do it.😂
@CTmoog5 ай бұрын
apparently you didn't watch the 65 beetle series...hahah...Let's do it! =) kzfaq.info/get/bejne/brtlocSH2LvalXk.html
@diha54705 ай бұрын
@@CTmoog I don't need to watch your Beetle series. I was interested in the 914 restoration. But you just can't go any further because you keep starting new projects without finishing the old projects. Read through the many other comments. This bothers not only me, but also many others. You don't seem to care though ha...ha...ha
@Flathead19498ba5 ай бұрын
You have no business working on a truck if you don't even know when you find the jack crank handle what it is for..
@jamesmorris70745 ай бұрын
Stick to VWs
@CTmoog5 ай бұрын
James, I know you've been here a long time. This is my 3rd F250 project. It's going to be awesome! Stay tuned! =)
@jzlharvey5 ай бұрын
Shorten that grandpa long bed.
@CTmoog5 ай бұрын
I'm keeping this one long. It's a work truck not race car. I will buy a factory short bed project soon and spice it up a bit. Stay tuned! =)
@KourtlinThacker-du1xf5 ай бұрын
Kloiur
@duanedortch49235 ай бұрын
U find anything rusty *****
@alexmoriz48025 ай бұрын
dislike for dropped pants
@SamHudsonJr5 ай бұрын
YOU MAKE MADD YOU WILL NEVER STAY INTO ONE PROJECT AND FINFISH IT . DONOT BUY ANOTHER AUTO UNTIL YOU FINISH THE OTHERS!!!!!!!!!!!!!
@CharlieNagoo5 ай бұрын
Whether you actually finish a project or not, at a minimum you should offer some closure on each of these projects. It would please your audience, which is losing patience with you. Every story deserves an ending.
@sehravit5 ай бұрын
Very boring, too much speak , very little action 😰
@shrikantsarsar5 ай бұрын
Every Time New Project But Not Completing Any 1 Of Them.. No Use CT.