FULL MAKE-READY and fast run / 1.1 Million Cartons - Bobst Expertfold

No video

FULL MAKE-READY and fast run / 1.1 Million Cartons - Bobst Expertfold - folder gluer

Рет қаралды 8,117

Күн бұрын

This is for newer operators and for those who are curious. Just a simple straight-line, but I filmed it for 2 reasons... I wanted to illustrate to newer operators how planning ahead and attention to detail can lead to a care-free run, and also because I had a few hours before die-cutting would have enough material for me to run.
Although my usual M/R time is much quicker on something this simple, filming slowed me down a bit and I also wanted to go a bit slower to allow time to explain a few things in the video when editing.
Also of note, the Cartonpack was already set up before I decided to film... sorry for that. However, I have a few videos and shorts showing this carton running on the Cartonpack. Check them out if you're interested.

Пікірлер: 53

@jameswang3557 Жыл бұрын

This is Alex from China, I also like folder gluer, Thanks for your sharing

@Oakhart76 Жыл бұрын

You're welcome Alex.

@ismaelburk2913 4 ай бұрын

Muito bom seus videos sou operador de cartucheira aqui no Brasil ja faz 27 anos gosto muito dos seus videos 💯👍

@Oakhart76 4 ай бұрын

Thank you. I'm glad you like them! I hope you are having a good weekend.

@marconiparello 11 ай бұрын

Impressive! I am a paper cutter operator (guillotine). Very interesting video. I truly like it. From Brazil.

@Oakhart76 11 ай бұрын

Thanks and welcome!

@fy_pool_day2 Жыл бұрын

We appreciate your service! ✌

@Oakhart76 Жыл бұрын

thanks

@vikrammistry8525 Жыл бұрын

Hi there.. I am beginner in carton folding. I just came across your video today and i ended up watching all videos of your channel. specially this full make ready. They are amazing also, the skill set you just have is just awesome.🙏 I am requesting you to please make, video on the various types of cartons according to their folding types and how they will get folded in machine step by step.🙄

@Oakhart76 Жыл бұрын

I'm wanting to do something like that, but most of the time I don't have the time to set up and record. I'm glad you enjoy the videos.

@TimBassett-mh9ou 10 күн бұрын

I’ll stick to running my Bobst die cutters 😂

@Oakhart76 9 күн бұрын

I always thought die cutting would be harder, but the die cutters told me it was the opposite lol. We have to deal with any issues from die cutting and printing, not to mention sheeting. I don't miss it lol.

@Invictus6169 Ай бұрын

Muy buen video, crees en algun momento subir un video tutorial acerca de los cajas de fondo automático? Te lo agradeceria bastante

@Oakhart76 Ай бұрын

Thank you! Unfortunately I no longer work in this industry. I leave these videos up for people to learn from. Maybe I will post another video in the future though.

@krzysztofwiter4832 Жыл бұрын

I see all your videos... Really appreciate that you spend your time to share some info with us... Thanks for this. If I can kindly ask, I would like to see in detail how to set up feeder to have so nice and consistence feeding. What we see it depends on pile height when it is small it is ok, when we placed more pieces it start to feed double... Yous explanation on this part would be very helpful... Thanks a lot in advance for this..

@Oakhart76 Жыл бұрын

I'll see what I can do. 🙂

@krzysztofwiter4832 Жыл бұрын

@@Oakhart76 thanks, I know that it is not easy when there are many white collars and they do not like loosing time for stupid things like recording videos... One more time thanks

@mho5rider400 Жыл бұрын

Waiting for this

@Oakhart76 Жыл бұрын

Sorry I made you wait 🙂

@RafaMartinezruiz Жыл бұрын

Hola puedes hacer video de como funciona el alimentador de cajas que le acoplas , me gustaría mucho .😊

@Oakhart76 Жыл бұрын

I'll see what I can do...

@gimppimp Жыл бұрын

Great job

@Oakhart76 Жыл бұрын

Thanks

@walikhan8685 5 ай бұрын

Sir, I am also running this machine, if it shows many errors in barcode in the display. can you tell me what happens

@Oakhart76 5 ай бұрын

Sometimes the color of the barcode will mess it up. If the barcode is too small of not clear or if some of it is missing, it can show errors. If the blanks were not registered when being die-cut or printed, it can cause the positionof the barcode to move slightly. Also make sure that the trigger eye and barcode scanner are reading the same carton at the same time. you may need to adjust the trigger eye so it reads the carton before the scanner reads the barcode. maybe slow the feed down so there is a bigger gap between cartons. Also, make sure the trigger eye is not being triggered by part of the machine (That happened to me a few times). Also very important to look at the cartons that are being ejected. Are they all the same die position? Of so, that means that those die positions were off register in die-cutting or printing. Take the bad ones and compare them to good ones and see if there are any differences. I hope that helps!

@Ashish-Hindustani 8 ай бұрын

👌

@Oakhart76 8 ай бұрын

👍

@thomasbatista1109 Жыл бұрын

Thanks for the vídeo Do you make a vídeo with the cartoonpack please it will be awesome Thank continue with your video loved

@Oakhart76 Жыл бұрын

If I get a chance and all the catchers aren't around it, I will

@GouravKumar-lj6xh Жыл бұрын

nice

@Oakhart76 Жыл бұрын

Thanks

@mdshihabshak6395 Жыл бұрын

Good

@Oakhart76 Жыл бұрын

thanks

@satishvarma9068 7 ай бұрын

Good iam also gluer operator form India is there any vacancy

@Oakhart76 7 ай бұрын

No. Sorry

@mulki-channel 6 ай бұрын

Anda sedang apa dalam beberapa menit. Sedangkan kami tidak bisa melihat apa yg Anda lakukan.😊😂

@Oakhart76 6 ай бұрын

@waheebalshamiry1529 Жыл бұрын

Good jop man ... Have u finish them 😅

@Oakhart76 Жыл бұрын

yep we can do about 400,000 per shift

@Tonicwine999 Жыл бұрын

how they hell did you lose the "T" in BOBST?

@Oakhart76 Жыл бұрын

Not sure. Was like that when I started there

@mattlee3400 10 ай бұрын

If I did that my glue would miss all over the place

@Oakhart76 10 ай бұрын

Did what?

@iTsShocka613 5 ай бұрын

I run these expert folds they are rubbish. they are cheaply made not solid machines like the alpina machines we have they are truly solid well built machines

@Oakhart76 5 ай бұрын

yep

@iTsShocka613 5 ай бұрын

@Oakhart76 great video though I'm always learning from you 👍