Hi Carol, Thanks for your kind words, so glade you enjoyed the video project!! When you have time check out my video, WE HAVE A WINNER!! You can see which candy dish got the most votes. Have a great day and thanks for subscribing to my channel. Regards, Bill Stone

Hi Amanda, So glad you enjoyed the video on the candy dishes!! Chack out the video WE HAVE A WINNER and see which candy dish got the most votes. Thanks for your comment and enjoy your day!! Regards, Bill Stone

Hi Lila, So glad you enjoyed the video and for your kind words. Check out the video WE HAVE A WINNER!!! and see which candy dish won the most votes. Thanks for your comment and have a great day!! Regards, Bill Stone

Hi Teri, Thanks for the tip, will give it a try next time I'm working with frit. Hopefully you will check out some of my other videos on my channel> Regards, Bill Stone

@@billstonesstainedglasscrea3310 Yes I will. I did enjoy this video.

Hi again, Glad you are enjoying the videos; it's been fun sharing these projects with others. Have a great day and thanks for your comments. Regards, Bill Stone

Me too

Hi Sally, Thanks for your comment, if you have any questions regarding my videos, please feel free to ask me anything about them. Have a great day and thanks for subscribing to my channel. Regards, Bill Stone

Hi Cheri, So glad you enjoyed the video project and thanks for your kind words!! Check out my video WE HAVE A WINNER!! and see which candy dish won the voting. Have a great day!! Regards, Bill Stone

Hi Carol, So glad you enjoyed the video, there's a couple of other videos where I have used Fused Glass in them. Check out the wind chimes, and the pinwheel wind chimes along with the floral leaded glass projects. All the projects I make that are fused glass are made with COD 96 glass. Check out the video WE HAVE A WINNER !! video and you can see which candy dish won the voting!! Thanks for your comment, and please feel free to ask me anything about these video projects. Best of luck with your fused glass adventure. Also check out my video THIS IS WHAT HAPPENS WHEN THINGS GO BAD!! You sometimes get a surprise with your fused glass projects. Have a great day!! Regards, Bill Stone

Hi, thanks for your kind words, glad you enjoyed the video. Check out We Have A Winner!!! video and you can see what everyone that voted liked best. Again, thanks for your comment, please feel free to ask me anything about these projects and I will send you a reply. Regards, Bill Stone

Hi Marta, Thanks for your kind words, so glad you're finding these projects are helpfully. It's been fun sharing them with others!! I'm going to be posting the winning dish this weekend. If you haven't voted for your favorite one you still have time. Are you into fused glass right now or just thinking about it? Thanks for your comment and have a great day. Regards, Bill Stone PS: If you like Travel Adventures, check out my new travel channel, Bill Stone's Travel Adventures

Hi EM, This one is kind of running away with the voting!! I will post the winner at the end of the week. Love, GDad

Hi Margarita, Thanks for your kind words, glad you enjoyed the project. It's been fun sharing these projects with others!! Enjoy your day!! Regards, Bill Stone

Hi Linda, Thanks for your kind words and your comment on the Fused Candy Dishes. It's been fun sharing these projects with others. Hopefully you will check out some my other videos on my channel. Have a great day!! Regards, Bill Stone

Hi Annette, Thanks for your comment, so glad you enjoyed the video. If you want to see which candy dish won, the voting go look at the video WE HAVE A WINNER!!! It shows how each dish came in on our voting!! Again, thanks for your kind words, please feel free to ask me anything about these projects if you have any questions. Have a great day. Regards, Bill Stone

Hi, So glad you liked the video, it's been fun sharing these projects with others. Have a great day. Regards, Bill Stone

Hi Rachel, Good to hear from you again, glad you enjoyed the video. When you have time check out the video, WE HAVE A WINNER!! and you can see which candy dish won the voting. Have a good day!! Regards, Bill Stone

Hi Bella, Thanks for your comment, nice to hear from you. Check out the video WE HAVE A WINNER, and you can see which candy dish got the most votes. Have a great day!! Regards, Bill Stone

Hi Sandra, So glad you liked the video project, thanks for your vote on the candy dishes. Check out the video WE HAVE A WINNER!! and see which candy dish got the most votes!! Have a great day. Regards, Bill Stone

Hi Myma, Welcome to my channel, thanks for your kind words!! Check out the video WE HAVE A WINNER!! and see which candy dish won the voting!! Have a great day. Regards, Bill Stone

Hi Kathryn, Nice to hear from you, Thant's for your vote on the candy dishes. Have a great day and check out my new Bill Stone's Travel Adventure's channel, just getting it started take a look at it when you have time. Regards, Bill Stone

Hi Michelle, Thanks for your kind words, glad you enjoyed the video. Check out the video WE HAVE A WINNER!! and see which one won the voting. Have a Great Day!! Regards, Bill Stone

Thank you!

Thanks for your comments and thank you for your vote on which dish you liked best!! I have had so much fun making and sharing these different projects with others. Check out my Bill Stone's Travel Adventures videos, I'm just getting started with them. Again, thanks for your kind words, and feel free to ask me anything about any of these projects. Regards, Bill Stone

Hi again, glad you enjoyed the video. They are fun to make and make great gifts. Have a great day, and thanks for your vote on which one you liked best!! Regards, Bill Stone PS: Did you get a change to look at my new channel, Bill Stone's Travel Adventures?

Love them all and are they all food safe.

Hi Mellisa, Yes, they are safe for food. The one with the glass paint would be the only one I'm not sure about. It is draped with glass side in so I wouldn't think there would be a problem with it. Thanks for your comment, and please feel free to ask me anything about these projects. Regards, Bill Stone

Hi Terry, Welcome to my channel, I'm so happy to have you as a subscriber. Please feel free to ask me anything about these videos. There are 52 videos in all. Check out the video WE HAVE A WINNER !! and see which dish got the most votes!! Again, thanks and welcome to my channel. Working on a new video with my granddaughter, who hasn't never done any leaded glass before, should be a fun one. It's going to be a 3 panel suncatcher for beginners! Have a great day. Regards, Bill Stone

Thanks for your comment, Glad you enjoyed the video!! Hopefully you will check out some of my other videos as will. Have a great day. Regards, Bill Stone

Hi Karen, Thanks so much for your vote, I'm going to post the winner this weekend. You will get your Kiln when the time is right. You have to remember it's taken me 50 years to collect all the different systems I have. I had to learn most of these systems by trial and error over time, but with KZfaq now you can find out how to do just about anything you want!! Alot of time you can find these kilns for sale in the local newspapers. Before I purchased this one, I was using an old kiln made for making ceramics and it used what they called a cone setter for the max heat and then would turn off. Check around with friends they may know someone that has a kiln just setting around would like to get rid of it. Most of these small kilns just use standard household 110 voltage lines to plug into. If you were happened to find one of these old kilns, don't pay a lot for it, and you would meed to buy some setter cones for setting the heating range. I found 019 cone for draping all the way up to 015 cone for a full fuse. I'm sorry for rambling on!!! Have a great day!! Regards, Bill Stone

Hi Sylvia, Thanks for your kind words, so glad you enjoyed the video. If you haven't had time to watch the video, WE HAVE A WINNER!! you will see which dish won the voting. Again, thanks for your comment, please feel free to ask me anything about my video projects. Have a great day!! Regards, Bill Stone

Hi, So glad you enjoyed the video, you are in good company, check out the video WE HAVE A WINNER!!! and you can see which candy dish won!! Have a great day and I hope you will watch some of my other videos. I have 50 different glass projects on my channel. Thanks again for your comment. Regards, Bill Stone

Hi Laura, Thanks for your comment, glad you enjoyed the video project. Check out the Video WE HAVE A WINNER!!! and see which candy dish won the most votes. Have a great day!! Regards, Bill Stone

Hi Monica, Thanks for your kind words, so glad you enjoyed the video. Check out the video WE HAVE A WINNER !! and you can see which candy dish won the voting!! Have a great day!! Regards, Bill Stone

Hi, Thanks for your comment, so glad you enjoyed the video project!! Chack out my video WE HAVE A WINNER!! and see which candy dish won the voting. Have a great day!! Regards, Bill Stone

Hi Brett, Thanks for your comment and vote on your favorite one!! The Kiln I have is made by Skutt and is called a HotStart Pro & Fire Box. I have had it since 2009 and find it easy to program and set up. I use code 96 glass for all my fused projects, you can also use this glass for your stained glass projects It's made by Oceanside Glasstile Co., it's the old Spectrum Glass Co. All the glass they make is Code 96 Glass. Again, thanks for your comment. Regards, Bill Stone PS: When you get some time check out my new Bill Stone's Travel Adventures channel, just getting it up and running!

Hi Mimi, Thanks for your comment, so glad you enjoyed the video, check out the video WE HAVE A WINNER!! to see which candy dish won the voting. Have a great day. Regards, Bill Stone

Hi Austra, Thanks so much fir your kind words, I have enjoyed making these videos and sharing them with others like you!! Thanks for subscribing to my channel and I hope you will check out some of my other glass projects. I have a new one on Fused Glass coming out at the end of the week, keep an eye open for this one, it has some surprises in it. I wasn't even sure how it was going to come out!! If you have any questions about any of these videos, please feel free to ask me anything about them. Have a great day!! Regards, Bill Stone

Hi Ray, So glad you enjoyed the video, the slumping mold is about 25 years old and was made by Slumpy's, P/N SM-9100. They are still in business; I don't know if that mold is still available. If not, maybe you could find one on E Bay for a good price. If you will watch the video, WE HAVE A WINNER !! you will see which dish won the voting and the firing schedule is at the end of that video. Thanks for your comment. Have a great day!! Regards, Bill Stone

Hi, Thanks for your kind words!! So glad you enjoyed the video. When you have some time check out the video, WE HAVE A WINNER !! and you can see which candy dish won the voting. Unfortunately, I don't sell any of these projects, except at a Christmas Boutique we have every year where we live. I'm so sorry!! Thanks for your comment. Have a great day. Regards, Bill Stone

Hi, Glad you enjoyed the video, hopefully you will check out some of my other video projects. Also check out WE HAVE A WINNER!!! video and see which dish got the most votes. Thanks for your comment, have a great day!! Regards, Bill Stone

Hi, Thanks for your comment, glad you enjoyed the video. When you have time check out the WE HAVE A WINNER!!! video and you will see which candy dish win 1st place in the voting!! Hopefully you will take a look at some of my other videos on my channel. Have a great day. Regards, Bill Stone

Hi Michael, Thanks for your vote on the candy dishes!! Been a fun project to make and they make a great gift. Again, thanks for your comment. When you have some time check out my new channel, Bill Stone's Travel Adventure's just getting it started. Regards, Bill Stone

Hi, Thanks for your kind words, so glad you're enjoying the videos!! Check out the video WE HAVE A WINNER!! and you will see which candy dish won the voting. The circle cutter I'm using is from Amazon, sold by a company called Do It Tool. It's not expensive, around $20 and works great. Not too crazy about the numbers on the adjustable slider to set the size of the circle that you want. I just use my ruler and set the slider with the cutting wheel on it. Again, thanks for watching my videos and hopefully they will give you some ideas for your projects. Have a great day!! I have a new video coming out this weekend, keep your eye open for it!! Regards, Bill Stone

Hi, Thanks for your kind words, glad you enjoyed the video. Cutting a circle inside a circle can be done, it takes a lot of work to do that. There are several videos on KZfaq showing different ways to do it. I have never tried to do it, so don't know which style I would like best. Thanks for your comment and please check out the rest of my videos when you have time. Regards, Bill Stone

Hi Marcia, Thanks for your vote, it's a fun project to make and you can do just about anything you want to put on them. The base for all these dishes is a 3mm glass. COD 96, It's the old Spectrum glass, which is now Oceanside Tile and Glass. I was going to include the firing schedule in the video and forgot to put the slide in, my bad. I'm going to make a quick video with the winning dish and will add the schedule at the end of that one. I can tell you the first fuse is a full fuse at 1474, the second fuse is 1400 for the slump and the last is 1220 for the drape. If you have never draped anything before it's fun, you never know what you're going to get. You can just cut a square piece of glass and drape it and that makes a nice candle holder. Again, thanks for your comment, enjoy my videos when you have time. Keep a eye out for the winner video should be later this week. Regards, Bill Stone

Hi Michelle, I had a lot of votes for that one!! Check out the video WE HAVE A WINNER!! and see which candy dish win the voting. Enjoy your day!! Regards, Bill Stone

Hi Mami, Thanks for your comment, glad you enjoyed the video. Hopefully you will check out some of my other videos also!! Have a great day. Regards, Bill Stone

Hi Alisa, Thanks for your vote. Yes, all the base glass is 3mm COD 96, it's the old Spectrum glass and is now Oceanside Tile and Glass. The first fuse is a full fuse at 1475, The second fuse is at 1400 to slump and the third fuse is 1220 to drape the dish. I will show a fusing schedule at the end of the video showing the winner of the dishes. It will be posted at the end of the week. Regards, Bill Stone

Hi Adrienne, Thanks so much for your kind words, unfortunately I purchased that slumping mold about 25 years ago from a company called Slumpy's, it has a part number SM-9100. They are still in business and can be found on the internet. You might also check and see if someone on E-Bay might have one to sell. If you want to see which candy dish won the voting, check out my video called WE HAVE A WINNER!! Thanks for your comment, please feel free to ask me about any of my video projects. Have a great day!! Regards, Bill Stone

Hi Carloyn, Thanks for your vote, glad you enjoyed the video. These dished are fun to make and you can do anything you want to them. Hopefully you will check out some of my other video's. Have a great day. Regards, Bill Stone

Thanks for your vote, that dish is currently in second place!! Glad you enjoyed the video, hopefully you have had a chance to look at some of my other projects. Regards, Bill Stone

Hi, Thanks for your kind words, glad you enjoyed the video. The slumping mold was from a company called Slumpy's and the P/N was SM-9100. I purchased this mold about 25 years ago on a close out sale and don't know if they still make it. They are online, so you can check it out. The draping mold is made out of a standard red clay pot with some vent holes drilled in it and has kiln wash on it. Check out the We Have A winner!!! video and you can see which dish got the most votes. Thanks for your comment and feel free to ask me anything about these projects. Have a great day!! Regards, Bill Stone

Look at 2o minutes in. You will see the mold

Hi Susan, So glad you enjoyed the video, The mold is from Slumpy's and is about 25 years old, it has a P/N SM-9100. They are still in business and you night check with them to see if it's still available. Check out my video called WE HAVE A WINNER and see which candy dish wone the voting!! Again, thanks for your kind words and thanks for your comment. Have a great day!! Regards, Bill Stone

Hi Melissa, I think you're asking what mold I used to slump the candy dishes!! It's a real old slumping mold I purchased 25 years ago and is on longer available. I talked to the maker, and they don't have any more in stock. It was made by a company called Slumpy's. You can check them out on the internet. Thanks for your comment and please feel free to ask me anything about my video projects. Have a great day!! Regards, Bill Stone

Hi Lauri, Thanks for your kind words, so glad you enjoyed the video. Hopefully you will check out some of my other videos when you have time. Have a great day!! Regards, Bill Stone

Hi again, sorry I didn't see this question, yes you can make a water slide decal on a Laser Printer that uses dry toner, there are several KZfaq videos showing you how to make them. I haven't ever tried to make one as I don't have a laser printer. I think Amazon sells the decal paper you would need. I have no idea what the quality is like on them. Let me know it you try to make one. The decals I used are for the candy dish in this video were ceramics decals and fire at 1325 degrees. Hope this helps you out!! Regards, Bill Stone

Thank you! This helps a lot! I'll look for that ceramic decal paper and give that a try.@@billstonesstainedglasscrea3310

Hi Celesta, That slumping mold is from a company called Slumpy's. This is a real old mold I purchased about 25 years ago. I don't know if they still make this one, it's P/N SM-9100. So glad you enjoyed the video. If you haven't voted for your favorite dish, you still have time to vote. Going to close the voting on Saturday. I will post the winner then. Thanks for your comment and have a great day. Regards, Bill Stone

Hi, Thanks for your comment, the slumping mold for this project is about 25 years old and was sold by a company called Slumpy's. The P/N is SM-9100, they are still in business, and you can check to see if it's still available. I think it was for making ash trays originally, not sure of that. I never really liked that slumping mold until one day I decided to take a slumped project made on that mold and put it on a draping mold and the rest is history!! Sorry I couldn't be more help to you. You might check E-Bay and maybe someone may have one they would sell. Have a great day!! Regards, Bill Stone

thanks so much Bill!!!

Hi Janas, Your more than welcome!! Check out my new video I'm going to post tomorrow afternoon, it's a fun project to make!! Regards, Bill Stone

Hi Dot, Thanks for your comment, the slumping mold is from a company called Slumpy's and I purchased it about 25 years ago, not sure if they still have it in stock. The P/N is SM-9100. Regards, Bill Stone

Hi Mark, Unfortunately, that slumping mold is about 25 years old and was made by a company called Slumpy's. P/N SM-9100. They are still in business, might check their web page and see if they still have that one. When You have time check out my video, WE HAVE A WINNER!! and see which candy dish won the voting. Sorry I couldn't have been more helpful. Thanks for your comment and I hope you can find a mold that will work for you. Have a great dayRegards, Bill Stone

Hi Nancy, Thanks for your comment. That Slumping Mold is about 25 years old and was made by a company called Slumpy's with a P/N 9100. They are still in business; you might check then out on the internet. I think the mold was to make an ash tray. I got the idea to drape it into a candy dish because I really didn't care for it too much and since I don't smoke, I didn't need any ash trays hanging around. Thats one of the fun parts of making fused glass pieces, sometimes you try something that turns out real nice for you. You might also check on E Bay and see it someone has one for sale. Please feel free to ask me anything about these projects on my channel. Have a great!! Regards, Bill Stone PS: Did you look at the video WE HAVE A WINNER !! it shows which dish won the voting.

Hi Gwen, I'm so sorry, I posted the video and forgot to add the Firing Schedules. Look at the We Have A Winner!!! video, it's at the end of that video. Glad you enjoyed the video. Thanks for your comment. Regards, Bill Stone

Hi Mimi, Thanks for your comment, glad you enjoyed the video. That slumping mold is from a company called Slumpy's, Part Number SM-9100. I purchased this mold 20 some years ago and don't know if they still have it, you could check with them and ask if it's still available. May also check on E-Bay and see if someone might have one for sale. The candy dish was a fun project to share with others, check out the video WE HAVE A WINNER!!! and you can see which one won the voting. Again, thanks for your comment and look for to hearing from you in the future. Regards, Bill Stone