Fusion 360: Jars With Threaded Lids (For 3D Printing)

Рет қаралды 6,315

Ай бұрын

In this video I show you my method for making a basic jar in Fusion 360, with a threaded lid, for the purpose of 3D printing.
I am using an educational licensed Fusion 360, but I believe the free version can do everything I show in this video.
I made this video in one take, and it was unrehearsed, so excuse the messiness of it all. Hopefully, if I have more time to devote to making videos, I will be able to make more polished tutorials.
If you have questions, please leave me a comment
Have a suggestion for another video!? let me know down below!

Пікірлер: 40

@serviceteam1615 3 күн бұрын

Always learning new things... Thanks a lot

@Graham_Shaw 23 күн бұрын

Brilliant!! Thanks for sharing! This will be very helpfull :-) Great tutorial!

@missile1506 27 күн бұрын

This video and your Triple-Start Thread video are the 2 best I've seen on making easy threads without dealing with the thread tool and all the tolerance issues that go along with it. Thanks for sharing!

@ShopTherapy623 27 күн бұрын

Thank you so much for that awesome feedback! I appreciate the support!

@Wauk9390 Ай бұрын

I’m self taught and have been using fusion for years now and this opened up a whole new world for me that I never knew about. I’ve been doing it the hard way for sure. Thanks so much for sharing, love the raw format because it makes it easy to follow along. Great job!

@ShopTherapy623 Ай бұрын

I really appreciate the feedback! I'm glad this was helpful to you!

@beekeepersjourney8192 21 күн бұрын

I’m really liking your channel. This is my first “complete” object I’ve modeled in fusion. I sell allot of prints on TikTok and wanted to start making my own. This channel is a gem!

@richardphillips92 Ай бұрын

Watched a few now and this is an excellent video for your first one. Look forward to seeing more.👍

@aeywyn5230 Ай бұрын

If you really want a short twist ratio to lock the lid into place do a multistart thread. You have those on a lot of jars in the wild :)

@Wes-around 20 күн бұрын

This was great! I already knew enough to make a jar like this on my own, but what surprised me is how many functions you showed how to use that I didn’t know about. Thanks for the video!

@americorosales2085 28 күн бұрын

good Job thanks for sharing

@luddtechnologies6168 29 күн бұрын

The coil technique works great for filament printing with large threads. i have made lids for existing jars and vacuum cleaner hose adapters with left handed threads. Threads technique is great for smaller threads in resin printing. I put some 10-32 threads in a part and got good fit with an 8K printer. I used high pressure air to blow out the threads before final cure. Thanks for the new tips I picked up.

@oldfarmhand7714 26 күн бұрын

Thank you for sharing this useful information, you made a subscriber out of me. Please provide more Fusion 360 information!

@pezwezxx Ай бұрын

Just came across your channel and as a self-taught newbie to Fusion 360, I'm finding your videos great... Really appreciate that you're showing different ways to complete similar tasks, which is particularly helpful... Can't wait to give this a go... Thanks

@ShopTherapy623 Ай бұрын

unfortunately with unscripted, unrehearsed videos, sometimes you miss some easy/obvious steps. When I made the first lid, by creating the cylinder - instead of using the "combine tool" to cut away the inside of the lid, I could have used the "shell" tool - would have been much faster and easier. I will use this method on my next jar video. I just created "triple-start" threads that only take 1/2 turn to fully seat the lid

@andyshap Ай бұрын

Great video! You just taught me how to create a thread for a lid I was working on. I've been struggling with how to create a custom thread for a few days now. I'm a subscriber!

@makingtime2023 28 күн бұрын

Great video! I’m just getting into Fusion and 3d printing and this is helpful. Thanks

@Elect.tronyc 29 күн бұрын

Hey!!!! thanks you so much 😁

@JasonFornelli Ай бұрын

Nice timely tutorial for me. I’ve been wanting to customize a jar with some text, but didn’t want to grab an existing jar model then add text to it. This will get me over that hump!

@ansiaaa Ай бұрын

very well explained, with examples about how processes and tools work.

@ShopTherapy623 Ай бұрын

Thanks! I hope it was easy to follow!

@mikelaurie3850 Ай бұрын

Great video. I would just have shelled the puck to get the lid, much quicker. Nice threads

@ShopTherapy623 Ай бұрын

lol of course - didn’t even think of that. Seems so obvious when you say it.

@Sugarkryptonite Ай бұрын

Thanks for the great video

@MrRanDag Ай бұрын

Well done, Thank you for sharing.

@andrewmalaty8 Ай бұрын

it's my first time seeing this method and it's not the way i expect but i think it's cool! one more tool in the tool box.

@yavalang Ай бұрын

Thank you, very easy to understand!

@JT40_ Ай бұрын

Just what i needed!

@frankalvarez7997 23 күн бұрын

0.1mm clearance is 0.1mm clearance on all walls even on a cylinder. Being a cylinder doesn't double it. Unless I misunderstood, I couldn't figure out how you landed on .2mm of allowance mentioned 20:26

@PaulMillhouse7 6 күн бұрын

Huh, cylindrical threads, whodathunkit. You should provide some clearance on the bottom lip of the lid so that there's room for the threads to engage and compress the lid on the top of the jar

@ShopTherapy623 5 күн бұрын

Yes, I forgot to show that clearance in the video, but I usually do that.

@ChrisWard74 Ай бұрын

I think to complete this at the end show what you designed printed and show how the lid is. Is it tight when you screw it on?

@ShopTherapy623 Ай бұрын

Great idea! I will make sure I do that for future videos!

@CyPhErJuS Ай бұрын

Great tutorial, I was looking for something like this, what is your experience with a tool intended for threading? Is it more problematic?

@ShopTherapy623 Ай бұрын

It is more problematic, but I have had good luck with those as well. The trick is to add more allowance between the threads. I usually shoot for 0.25mm, but that also depends on the size of the printed piece. The larger the jar/lid the less likely these threads work well. I can make a tutorial on that as well if you would like!

@beekeepersjourney8192 21 күн бұрын

@@ShopTherapy623I’d like one on that