Fusion 360 The Wisdom of Project

No video

Fusion 360 The Wisdom of Project - Season 2 EP5

Рет қаралды 27,126

Күн бұрын

Thank you, Jack! Here are the details of the Project, Intersect and other important sketch tools inside Fusion 360!
(The advice in my videos are my own and are not intended to represent the views of my wife, children or employer)
My email:
contact@larschristensen.org
Want to learn more about Fusion 360? Check out this link:
autode.sk/2rXApL2
Free CNC Handbook:
www.larschrist...
LET'S CONNECT:
/ lars_cadcam
/ mrlarschristensen
/ cadcamstuff
MY SITE:
www.larschrist...

Пікірлер: 98

@AmericanMakerCNC 2 жыл бұрын

Great stuff, super helpful in clearing up these commands! Project: @1:04 Intersect: @4:40 Include 3D Geometry: @6:04 Project To Surface: @8:15 Intersection Curve: @9:18 Summary: @10:57

@RRAADDIISSKKUULL 2 жыл бұрын

Intersection Curves are AMAZING. I didn't know I needed these until now. Amazing Content.

@MrNursi 5 жыл бұрын

Back to the old days, that's more like it Lars. That was very useful thanks.

@cadcamstuff 5 жыл бұрын

Thank you for watching 👍😊

@emrahdrsn 5 жыл бұрын

I think is the first video on youtube (so far which I observed), with no dislike over 1000 watches. That shows the quality of work, congrats.

@cadcamstuff 5 жыл бұрын

Thank you 👍😊 And thank you for watching

@terke1230 5 жыл бұрын

Lars, thank you for all your videos. This one has to be the very best for making moulds of curvy 3D parts!

@3DShay 5 жыл бұрын

Great as always, really learning and enjoying, and wondering how lucky we are to live at a time that such a man like you exist. :)

@somecrazyusername 3 жыл бұрын

For me, this remains one of your most powerful lessons. I keep coming back to it again and again as I get better with Fusion. One thing that either I missed or you did not include converting a mesh selection to a sketch. I did the cut on an imported STL, got the mesh selection, but could not export the sketch as dxf. What I missed was Fit Curves to Mesh Selection with the closed spline options. BAM, I have a sketch to extrude, export, what ever.

@bobsamuel1567 4 жыл бұрын

Hi Lars, thank you, thank you, thank you!!! I always learn so much from you. You are without a doubt the master teacher, guide, and expert, the Guru of Fusion 360!!! Please keep creating these excellent, instructive, interesting and friendly tutorial videos. Thanks again, Bob

@Benctmoi 5 жыл бұрын

Thanks Lars for that really helpful video. Darn, I have been using the project function for month now. And struggled some times, were Intersect a plan would have been my answer. You have added 4 new tools to my toolbox. Good video as usual. So glad you are back

@sunpeter8260 5 жыл бұрын

Thanks, Lars! Learning from you everyday!

@cadcamstuff 5 жыл бұрын

You are so very welcome 👍😊Thank you for watching

@philippe5394 4 жыл бұрын

Thank you so much for your tutorial about project/include function and with interesting examples. As many of the Fusion 360 functions, these ones are also major. Thanks again, Philippe.

@jutto64 5 жыл бұрын

Cheers, the last couple very useful for working with double curves!

@structure7 5 жыл бұрын

Lars, you're just the best! Thank you very much.

@cadcamstuff 5 жыл бұрын

You are so very welcome! 👍😊

@s1nontribes 5 жыл бұрын

Excellent! I love the last example. Much easier than moving splines manually in 3D space heh

@cadcamstuff 5 жыл бұрын

Thank you 😊

@TomDouglass-cm9tu 3 ай бұрын

My go to guy…great stuff.

@davidfinlay8274 5 жыл бұрын

Yes Lar this the better way to do your video and easer on you. keep up the good work bud.

@chrisleech1565 5 жыл бұрын

Very useful. Thanks Lars

@joem6859 3 жыл бұрын

Lars.... you're the best dude...

@caswellsubs 5 жыл бұрын

Good stuff as usual! Glad to see you back!

@SpruceSculptures 5 жыл бұрын

Thank you Lars. Jack

@ekremtok1192 5 жыл бұрын

Thank you for the explanation and your time all the best.

@middleclasspoor 5 жыл бұрын

Thanks Lars, the "Project" command is one I have never really understood.

@RonFloyd 5 жыл бұрын

Thanks Lars!

@cadcamstuff 5 жыл бұрын

You are so very welcome 👍😊

@valmyscholes8693 5 жыл бұрын

Thanks, clarified a few things for me.

@cadcamstuff 5 жыл бұрын

Great! Thank you for watching 👍😊

@senzhou 2 жыл бұрын

so clear! very helpful, thank you Lars!

@spikekent 5 жыл бұрын

Great info and tips Lars, thank you.

@cadcamstuff 5 жыл бұрын

Thank you for watching 👍😊Glad you found it useful

@Lagartija219 5 жыл бұрын

As usual, great video Lars. Thanks for sharing.. BTW: I missed the episode where you explain what the silver box behind you is... what is it running? Thanks

@controlnumericomexico2778 5 жыл бұрын

Great!! Lars Usefull tips as always Thanks!!

@cadcamstuff 5 жыл бұрын

You are so very welcome 👍😊

@Dustin360s Жыл бұрын

This helped a lot... Thank You!!!

@rbrpulling 5 жыл бұрын

WOW, Thanks Lars!

@cadcamstuff 5 жыл бұрын

You are so very welcome 👍😊

@rodsdaytona 5 жыл бұрын

Is the Project tool a default tool when sketching? I'm getting the Project icons applied to my sketches when I don't expect them. Thanks.

@franzbaer5058 5 жыл бұрын

Fantastic Lars, thanx

@HybridiHippo 5 жыл бұрын

Hey, Lars 🍻🍻. Good introduction to projects. Flow for video good 😊 keep it....

@cadcamstuff 5 жыл бұрын

You got it! Thank you for watching 👍😊

@boblombardi9397 9 ай бұрын

Thank you

@2danshepherd 4 жыл бұрын

Good stuff Lars!

@Luigi-rq4xg 5 жыл бұрын

perfect

@RanPeleg 5 жыл бұрын

Great video Lars! Thank you! One question I would have, would be about the last example; Is there a way to make a face that's bridging between one edge to another? (Something like Loft function)

@cadcamstuff 5 жыл бұрын

I’ll have to think about that one...(it has been a long day)

@RanPeleg 5 жыл бұрын

@@cadcamstuff Thank you! Not sure if what I'm thinking about is possible to do, but I'm coming to Fusion 360 from 3Ds Max so it's quite different. But still, your videos help a lot and I learnt so much and fast from them! Great work :)

@Armandooooo 5 жыл бұрын

How do you rotate the view as you are without moving the mouse cursor? Do you have a trackball on your mouse? Another great video, thank you!

@hishram 5 жыл бұрын

Thank you ....

@timmallard5360 5 жыл бұрын

Connect the dots script needs to standard in fusion. I use project allot but the non connected segments drives me nuts

@americorosales2085 5 жыл бұрын

thanks lars for sharing you experience, I want to know why are not Designyou using the new UI design we need practice this new

@PetePanaia 5 жыл бұрын

Very useful information! Thank you!

@cadcamstuff 5 жыл бұрын

You are so very welcome, Pete 👍😊

@alexantonov4129 5 жыл бұрын

I thought, the last comand requires two intersecting surfaces. Good to know that it works also with two curves.

@itskevscott 4 жыл бұрын

Great explanation,, very useful!

@texascanuk 5 жыл бұрын

Great video Lars. I am having trouble adding text on a round surface. I have to line up each letter and there has to be an easier way.

@cadcamstuff 5 жыл бұрын

Sadly that is most likely what you have to do. The CAD in Fusion is based on mechanical CAD, not known for lettering details I’m afraid

@karlhudson7956 Жыл бұрын

G'day Lars I am following your tutorial on the project tool, my free copy of Fusion 360 doesn't have it. When I click on sketch it is not at the bottom like yours. Many thanks, Karl.

@mikekuhnkey7231 8 күн бұрын

Where did "Model" Workspace come from?

@eduardodanielantuna5768 5 жыл бұрын

Thank you Lars, very usefull.

@cadcamstuff 5 жыл бұрын

Awesome to hear! Thank you for watching 👍😊

@lantechbd 4 жыл бұрын

Thank you.....Love you.👍👍👍👍

@cadcamstuff 4 жыл бұрын

Thank you :-)

@milos975 5 жыл бұрын

Great tutorial. Thanks.

@cadcamstuff 5 жыл бұрын

You are so very welcome. Glad you found it useful 👍😊

@alexportiiii6414 2 жыл бұрын

Thanks

@devstefancho 5 жыл бұрын

Good lecture

@cadcamstuff 5 жыл бұрын

Thank you 😊

@berndshana 5 жыл бұрын

Thanks Lars....very helpfull

@cadcamstuff 5 жыл бұрын

Thank you for watching 👍😊

@jackbryan5851 5 жыл бұрын

Does the project to surface work for creating holes in a curved surface?

@garenne0169 5 жыл бұрын

no, you thank you so much !!!

@TheBoguimaraes 2 жыл бұрын

thanks

@malcolmtemporal6571 5 жыл бұрын

may I say you are doing a wonderful job. now I buy a cnc router and the first thing I need is a waste board with cut t slot and then planning but can I find it . it may be simple to you but its not to me. thanks malcolm

@cadcamstuff 5 жыл бұрын

Check this guy out kzfaq.info/get/bejne/prZ_p7t9qK21haM.html

@menmaoi 3 жыл бұрын

Hey... I cannot project my curve because fusion gives error like: Warning: Not support projecting sketch geometry into same sketch, please change the target sketch or geometry. Can u help me?

@austinshaner 3 жыл бұрын

That's because you cannot project a line drawn in the same sketch. In order to project a line, it must be from a different sketch. Simply close the sketch your on, start a new one, and project the curve.

@menmaoi 3 жыл бұрын

@@austinshaner thank you so much!

@wyatt5391 2 жыл бұрын

Can you trim or edit a projection ?

@hi_is_this_clorox_bleach 2 жыл бұрын

im having the same problem

@hi_is_this_clorox_bleach 2 жыл бұрын

Actually, I just figured it out... you need to go into the sketch with the projected geomtery, right click, then select BREAK LINK.... you will then be able to modify the geometry

@TheRangeControl 5 жыл бұрын

With ALL of the 5 axis CAD/CAM options that Autodesk keeps baking in, WHY won't they spend at least one month to BAKE IN Laser Cutting Cam Controls?

@cadcamstuff 5 жыл бұрын

Have you looked at the 2D profile cutter path? That was created with the intent to support laser, Waterjet and plasma.

@thomasheisler 5 жыл бұрын

Have you done a video on action figures type ball joints? if so i'd like a link

@cadcamstuff 5 жыл бұрын

I have not. But, I think you can find one on the Fusion KZfaq channel

@davidfinlay8274 5 жыл бұрын

How do you make the pink line to blue then black or just to black? or can you

@cadcamstuff 5 жыл бұрын

Pink/purple lines are projected lines and those will normally stay that color👍😊

@davidfinlay8274 5 жыл бұрын

@@cadcamstuff same with lock constraints?

@eduardodanielantuna5768 5 жыл бұрын

Hi Lars.

@3DPOTTER 5 жыл бұрын

This video is very useful, I use project constantly and this is very helpful. By the way you're the reason I have successful business. You are the reason also I purchased license for Fusion 360. With your help I taught myself all the manufacturing processes I need to create our successful business and machines. Can't thank you enough. Danny 3dpotter. Com