Fusion 360 Tutorials - Surface Texturing

Рет қаралды 101,733

3 жыл бұрын

In this video, I'll show you how to make various textures on surfaces. This tool isn't limited to the techniques I show in this video and it really is all up to your own eye.
Remember to like and subscribe and share this channel with your friends and family!

Пікірлер: 77

@axelbruce1926 3 жыл бұрын

You made this process very simple and fast. Thank you.

@tqqqspxl5590 2 жыл бұрын

Thank you!! very clear and specific!! I drew a toy tire for my daughter using this skill!!

@GrieveIV Жыл бұрын

Been using meshmixer for work for about 3 years (dental), trying to move on to do my own hobby related things with fusion 360, and man the feeling of how easy all this is. Texturing and such. It’s that kind of exhilaration where I just have to laugh. Thanks for the great instructions👌🏻

@cstayfresh2 2 жыл бұрын

You're a real G for this one. Thank you.

@JustJay2kay10 Ай бұрын

this is super easy to follow and will help me a bunch! thanks a lot :)

@fataljaxx 10 ай бұрын

You are a hero man! Thanks, was very straightforward and helped me a lot.. Cheers

@bn326160 2 жыл бұрын

Awesome, added it to a replacement scroll wheel for my mouse!

@ImBatman-yk1yx 8 ай бұрын

Excelent video this helped me alot very very straight to the point and your instructions were also very clear thank you very much

@ishmaelkamara9925 10 ай бұрын

Great video! Thank you!

@rodri45ESP Жыл бұрын

Thank you for the quick tutorial.

@SpinStar1956 Жыл бұрын

Thanks very much for this video; just what I was looking for... SUBSCRIBED !!!

@criscodesigns9477 10 ай бұрын

thanks for the tutorial! learned a lot

@paulakafish 2 жыл бұрын

Nice video, helped out a lot!

@ofconsciousness 2 жыл бұрын

Thanks for this vid! Keep it up!

@stitchwitch70 Жыл бұрын

Super-useful -- thank you!

@Ilan-Aviv 8 ай бұрын

beautiful!!! thank you

@primewelderprimewelder1551 5 ай бұрын

cheers mate thank for the great video

@marvinhagen 3 жыл бұрын

New sub. Thank you for the teaching!

@matthewmathis62 9 ай бұрын

Thank you for this video! That was very helpful. You're a great teacher. Thanks, Avram. (Btw, I'm making Grill Knobs for our Grill. So that's why I'm watching this video)

@michaelzimmer4850 2 жыл бұрын

Great video man!

@patrickrenschler 2 жыл бұрын

thanks for sharing!

@Oblivionpma Жыл бұрын

i just found this video, and my brain has burst into a million pieces!!!!!!!!!!

@nathanking2484 3 жыл бұрын

Thanks muchly!

@bartolomeusilvaalves1650 2 жыл бұрын

very good!!!

@AthanCondax 3 жыл бұрын

Great video! I never considered using the pipe tool.

@avramplager1953 3 жыл бұрын

The pipe tool is quite an interesting tool because it has a lot of different uses. I'll dedicate a specific tutorial to that in a few days so stay tuned and thanks for watching!

@JUMPCHANNEL11 2 жыл бұрын

Thanks very helpful

@axel_fagerberg 2 жыл бұрын

Thank you!

@derekgreig6905 8 ай бұрын

Any chance of a tutorial on complex geometry to show the same results? Great video, thanks.

@mako040472 4 ай бұрын

This is aaaa good video. Aaaaaa i aaaaa learn a lot aaaaa

@masood6086 2 жыл бұрын

thanks for share

@TNSR-Destiny Жыл бұрын

I'm trying to model brick fascia on a concrete panel. I can't emboss into it because that would remove engineered minimum distance. In trying to lay out the brick above the panel I'm going crazy. Crazier!

@TheCreativeDork5 Жыл бұрын

What if you want to yake a black and white pattern? How can i get it on the roller?

@sebastianbruer4909 Жыл бұрын

Hi! I found this tutorial very helpful. Maybe you have a solution for making a similar pattern on a coned shaped body?

@EDC3DP 6 ай бұрын

its pritty much the same process the only problem is that youll end up with different sizes on top and bottom

@Adrian-wd4rn 3 ай бұрын

Works great if everything is a straight tube....Now do this on some organic, non uniform shapes.

@MrMistahShadow Жыл бұрын

I am absolutely mesmerized by how you are able to smoothly glide and rotate your camera view. How did you do it? I've seen lots of tutorials demonstrating this but I haven't a clue how they do it.

@megafonmann 10 ай бұрын

Look for a SpaceMouse

@jeroen7062 10 ай бұрын

Probably using a spacemouse. Google it.

@riccello 5 ай бұрын

Precision mouse

@roberthalvorsen429 5 ай бұрын

They have this mouse colloquially called a space mouse that is kind of like a stick shift in a car. You grab it and it registers all of the movement, pan, tilt, rotation, etc.

@chelseawalters1070 2 жыл бұрын

Thanks for the video. Can this only be done with circular objects?

@avramplager1953 2 жыл бұрын

You can do this with other objects but it works best on circular objects

@andrewmcnulty0 3 жыл бұрын

this is great but i cant seem to work out how to apply that knurling to a middle face between to chamfered edges of the cylinder, is there a way to do that?

@avramplager1953 2 жыл бұрын

What you could do is use a series of torus objects that get sequentially bigger as you go from the bottom of the chamfer to the top of the chamfer. Let me know if you need further clarification. I'd be glad to dedicate a video to this if you want

@waynefilkins8394 Жыл бұрын

How would you do it if u just wanted the knurling on a specific part, like if you draw an oval or square on the side of the cylinder, and you just want that section to have knurling and not the rest?

@avramplager1953 Жыл бұрын

For that, I'd recommend extruding the edge of the section you want knurled and then subtracting that extrusion from the knurling setup and then subtracting the adjusted knurling setup from the cylinder

@angertone213 5 ай бұрын

Now to learn how to do this on a square/rectangle

@jasongarnett2191 3 жыл бұрын

This is brilliant. Please show how to do this in inventor.

@avramplager1953 2 жыл бұрын

Unfortunately I don't have inventor so I can't make a tutorial on using that software yet but there should be similar functions in Inventor that you can use.

@canoradam 3 жыл бұрын

Is there a way to add knurling to a face surface? Like on the grip of a handgun?

@avramplager1953 3 жыл бұрын

Absolutely. You should be able to do that with the technique in this video but if not, please feel free to send me an email and I'll help you out

@miras.6761 Жыл бұрын

how to do it on a curved shapealong the way

@bendtherules0 Ай бұрын

Why is the video resolution so low even at 1080p? Anyone else faced this?

@Wendym0906 Жыл бұрын

whenever i try to mirror the line i get compute error :( any ideas? tx

@GlitterGuru 3 жыл бұрын

How do you pan/zoom so smoothly? Stylus?

@avramplager1953 3 жыл бұрын

I have a device called a SpaceMouse by the company 3dConnexion. It's a phenomenal tool that allows me to navigate the 3d workspace in almost any modeling or CAD software

@ramiroheredia5847 3 жыл бұрын

there is some way to do the same thing but in a sphere?

@avramplager1953 3 жыл бұрын

Yes, absolutely. Send me an email and I'll explain the process

@staticGenerator4You 2 жыл бұрын

A nice improvement to this video would be to print and show the actual prints from this design!

@avramplager1953 2 жыл бұрын

Once i begin posting videos again, I'll be sure to keep that in mind!

@terribletcm 2 жыл бұрын

As soon as I perform the first mirror at 2:50, I'm left with HALF of my first coil. Edit: So I had to instead make a new body with the knurling, then CUT the main cylinder using them as cutting tools.

@avramplager1953 2 жыл бұрын

Could you email me a picture of how this looks? I'll try to detail a video to that this Sunday.

@naurobot6608 2 жыл бұрын

Thanks from russia

@kwstasber9190 2 ай бұрын

how you can do that in plane square with lines

@den-f7y 3 жыл бұрын

How about make this on surface of model non standard shape?

@avramplager1953 3 жыл бұрын

Do you have a specific shape in mind? That's a very good question but i would need to know what specific shape you're trying to apply it to

@den-f7y 3 жыл бұрын

@@avramplager1953 I mean, make a more complex surface from the elevation texture on the existing surface. Any model like a vase. I am having problems with this in another editor. And I look at Fusion 360. What tools are there for this.

@oORamonOo 2 жыл бұрын

When the pattern operation ends comes Mistake: Invalid float operation

@miras.6761 Жыл бұрын

Cant move the coil

@tecnologia.educativa 10 ай бұрын

por que colocan el titulo en español si el contenido es en ingles? para que mucha gente reproduzca inocentemente y a ustedes les aparezca un contador de visitas alto?

@michaelstraughn3465 6 күн бұрын

ummm, good video, ummm, good content, ummm, good job, ummm...

@Festivejelly 4 ай бұрын

Not really texturing. Just a repeating pattern.

@Splarkszter Ай бұрын

THAT'S A TEXTURE. LOL

@Splarkszter Ай бұрын

Use blender if you want otherwise.

@jovannycosme 10 ай бұрын

You need to elaborate more on details. I followed your tutorial step by step and my coil disappeared after hitting ok. Not very helpful to the not so advanced brains here 🤦