Fusion 360 - What's New 2D Drawings -Season 3

Рет қаралды 13,787

3 жыл бұрын

What's New 2D Drawings, is my attempt to wrap my head around all the new features that have been added since my last video 12 months ago.
0:01:52 New Easy Access to Drawing Templates
0:11:10 Title Block Management
0:16:28 Visible Only
0:17:25 Section View
0:19:18 Switch Units
0:20:27 Sketches in Drawings
0:21:17 New Outputs
(The advice in my videos are my own and are not intended to represent the views of my wife, children or employer)
Contact me:
www.larschrist...

Пікірлер: 44

@jeffhulett4194 3 жыл бұрын

Wow there’s a lot of stuff in drawings, I talked my boss into buying Fusion 360, so now I better learn it, thanks for the video.

@cadcamstuff 3 жыл бұрын

Yes, they have been busy :-) thank you for watching

@bobcole268 3 жыл бұрын

After spending the last year or so as a hobbyist learning Fusion 360, now AD have removed not only the ability to save, delete or even rename files but also the ability to construct drawings. Not a good move by Autodesk. Great videos by you Lars but now is farewell probably also by thousands of other hobbyists.

@cadcamstuff 3 жыл бұрын

Hi Bob, something else is going on with you install of Fusion 360. You can still save, delete, rename files and create 2D drawings.

@michaelcrumly 3 жыл бұрын

@@cadcamstuff Just delete it bob, it will work better for you then

@MarkTomey 3 жыл бұрын

Great video - really like the new ability to edit the drawings.

@IceCreams62 3 жыл бұрын

Great video Lars. Thanks a lot for your effort for us.

@cadcamstuff 3 жыл бұрын

You are so very welcome

@Rubbernecker 3 жыл бұрын

Great video, unbelievable software!

@hoffmanmachine5020 3 жыл бұрын

Glad you are back!! I love the “what’s new” series! Wondering if there was any follow up on the break down assembly for cam...? I have been looking for some info on this and have not been able to find anything. Any help would be amazing! Thank you again for all that you do!!!

@americorosales2085 3 жыл бұрын

thanks Lars . very good to know you tutorial

@cadcamstuff 3 жыл бұрын

Thank you :-)

@ronrowe8161 3 жыл бұрын

Thanks Lars That has saved me a lot of time

@cadcamstuff 3 жыл бұрын

Awesome to hear. Thank you for watching

@seongsoolee250 3 жыл бұрын

It's great. I love it! This is what i want.

@user-bt7jg9ng9d 3 жыл бұрын

I like it very much, making clips useful and interesting 😀 I just started making DIY clips.

@igorkeser9716 3 жыл бұрын

Hi Lars, can you add material in title block (automatically not manualy)

@terke1230 3 жыл бұрын

Hi lars. Thank you for the video. Always helpful. Can you please show how to edit the quantity and/or the description?

@mikemolt9770 3 жыл бұрын

Lars, can you get them to give us break views?!?

@jimanderson8173 3 жыл бұрын

Hi Lars, Thanks for walking us through this. I have an issue. I do not get the Qty to sum my part count. I get a line per each component. What am I doing wrong?

@dmitrysokolov6733 3 жыл бұрын

Hi! What is the principled difference between Fusion and Inventor? Now i'm use Fusion and thinking about trying Inventor

@robertpaulson6666 3 жыл бұрын

Hello Lars, within a 2D drawing is there a way learn which template was used on a particular drawing. Where is that information stored?

@donmartinez2490 3 жыл бұрын

Hello! is there a feature where I'll be able to change the arrowheads in a drawing into a dot or a tick? the arrows overlap sometimes Thanks

@wjcr20 3 жыл бұрын

Great video. Do you know of any way of changing the title of the sheet to the components what is an assembly without have to save it out as it's own file?

@fyrbutkus 3 жыл бұрын

Thanks Lars. Great as always. My question is how to bring into 2D Drawings a long shaft with the end having detail that needs to be shown that I do not have to scale down the whole thing? I want to show a break in the shaft so the end detail is at scale without doing a detail view.

@cadcamstuff 3 жыл бұрын

I believe that function is close to be released

@fyrbutkus 3 жыл бұрын

@@cadcamstuff Thanks

@michaelcrumly 3 жыл бұрын

@@cadcamstuff did you guys manage the anti-scumbag feature for yourselves ?

@Lillbogge 2 жыл бұрын

What about symmetric views?

@SteveRaynerMakes 3 жыл бұрын

Hey Lars. How would you go about sketching like a tic-tac-toe grid with some thickness in fusion 360? I'm thinking of some parts drawer dividers.

@cadcamstuff 3 жыл бұрын

Hi Steve, Check out this video on the web feature kzfaq.info/get/bejne/aN5jmKhol7nUZ58.html

@SteveRaynerMakes 3 жыл бұрын

@@cadcamstuff that's a pretty powerful feature, I learn't something new

@davidfinlay8274 3 жыл бұрын

lar could you make the explouded in anumate and bring into 2d ??

@raider1628 3 жыл бұрын

hi lars, could you do a video on step by step programming taper threads? how to get the maj and min dia as well as thread Hight?

@cadcamstuff 3 жыл бұрын

Hi Raider, Not sure what step programming is. I did this video kzfaq.info/get/bejne/mtWfl82ivZ-ahXk.html

@raider1628 3 жыл бұрын

@@cadcamstuff thanks for responding that’s cool. What I meant was how you find the major and minor diameters and height of taper thread. How you would go about programming the turning op and then the thread op. That’s for everything you do. I don’t see any good videos on how you go about turning these types of thread.

@elephantwalkersmith1533 3 жыл бұрын

None of this works unless you pay $60/month. Now I have to put together my details and such in Design, and then fiddle with that...drawing is pretty much useless for hobby user now. Too bad, it was the best way to check your design...AD really does not like hobbyists...

@frankderks1150 3 жыл бұрын

Not true, just create multiple sheets in a drawing instead of multiple drawings.

@bobcole268 3 жыл бұрын

@@frankderks1150 No drawings are not available in the free version, well I cant access that option

@elephantwalkersmith1533 3 жыл бұрын

@@frankderks1150 you can’t create multiple sheets in a drawing unless you pay $60/month. Looking at printed paper is the best way to check your design. I can actually draft my parts by hand faster than it takes to use the crippled drawing 2d application. Wow, what a great idea for a untuned channel. Have a draw off between the crippled fission 360 and a good pencil and velum drafter.

@frankderks1150 3 жыл бұрын

@@elephantwalkersmith1533 Yes you can, you simply don't know how. In the drawing dialog there is a select option to create a new sheet within a drawing instead of creating a new drawing.

@elephantwalkersmith1533 3 жыл бұрын

@@frankderks1150 plus no longer works. It’s got a star there for upgrade path only. Can’t create anything as a template, also upgrade path only.