FX Impact M3 - Front regulator disassembly and assembly

Рет қаралды 7,734

Жыл бұрын

I'm disassembling the front reg to fix a slow leak. While taking it apart all parts are cleaned and placed back together.

Пікірлер: 11

@omarzolo6689 8 ай бұрын

Hi I've probleme to find the good size of o ring for the 1st regulator and i see in diagram there is not reference please help me to know Thinks bro

@gateopen9874 Жыл бұрын

Hello sir, A question pls : Will this M3 bottle connector also fit Crown MK2 ? Looking for a way to make optimal use of my 300bar bottle i ve mounted on the Crown. Thank you. Lester

@Longrange_Airgunning 11 ай бұрын

Hi, This regulator will not fit on the Crown no. The threads are bigger to make space for the filling hole and regulator in the same housing.

@JustMe-xe2wu Жыл бұрын

Hi , do you clean and polish the liner as well

@Longrange_Airgunning Жыл бұрын

I do clean my barrels yes but I only polish them if they do not perform according to what I expect

@omarzolo6689 8 ай бұрын

Hi Pls size exactly of oring of this regular plz and number in diagram Thanks

@chrisfigueroa3361 Жыл бұрын

Did you have a leak from breathing hole or were both gauge showing equal in air pressure and you fix it 🤔 thanks for sharing bsafe buddy 👍

@Longrange_Airgunning Жыл бұрын

leak from the breathing hole. But if both gauges are showing the same pressure than most likely the adjustment screw is too far out or the piston is damaged.

@chrisfigueroa3361 Жыл бұрын

@Airgun_Tech same here I had a leak from breathing hole so I got a new reg from fx usa it fixed everything now it's showing the same air pressure on both gauge but if I shoot it goes to 200 bar but over night it's back to showing the pressure man it sucks because I'm using a 300 bar 700cc bottle but I only fill to 250 bar I have fill to 275 bar before but I stopped because I don't want to ruin my gun ty for the info

@chrisfigueroa3361 Жыл бұрын

Well I screwed in the adjustment screw a little in and it's holding at 210 bar so far I pray it stays there 🙏

@chrisfigueroa3361 Жыл бұрын

I had to buy another front reg the brass cup it like bent on both regulater that I have I don't know why like wtf I know that the black piston is supposed to go through it well on the two that I have they don't idont why or what happened crazy its like it made one side smaller then other side that goes in the block 😮