Just must say that your channel is amazing thanks for your time and keep up the good work

These tutorials are peerless. I'm not an FX kinda guy, but you could tear down a toilet flush assembly and I would learn something new about airguns. I'm here for the Leshiy 2 content tbh but your knowledge and love of PCP technology is inspirational.

As always, very well explained and clear. thanks.!. Looking forward to the re-assembly. 👍👍👍

15:05 ...thank you very much for hinting where that noise comes from when uncocked. First one who mentioned that in a video! Really appreciate!

Wow you know your rifles I'm impressed so easy to understand and I like the way you tell us the hex key measurements thankyou very much for your intuitive turtorial.

Excelente vídeo! Best regards from Portugal!

Nicely done ~ Thanks 🥇👍

Great video. Thank you.

Quality from start to finish 👏 I watched every second and I enjoyed every second very good job 👍 I won't be chopping in my mk2 anytime soon but that said if I didn't have an impact already and wanted one I would definitely get a new m3 over the possible cheaper surplus mk2s As regards to the backwards compatability I've decided if anything for the parts that would make the difference to me (1st regulator and quick tune) its more a case of forward compatability at this point 😁 I am basically thinking if anything it would be better to look out for a m3 block and transfer my mk2 parts onto that 😊 obviously this is the opposite way of looking at it and the blocks aren't available separately directly from fx and why would they but these things have away of coming around, this would be way easier then getting my mk2 block re-engineered to accept the m3 valve minus the other benefits. This is light years away but think I definitely won't be the only one thinking this 😆 Anyways looking forward to the reassembly with the many personal improvements brass reg piston and all 😀👍? atb

Brilliant videos for the UK market especially, wondering do you work on guns for a price as would like for my M3 to have all those legal mods done?

Nice and well done. 👏

Nice video, subscribed ;)

Are there drawings and part lists available for those restricted 12 variant? I just can find some for the unrestricted. my local dealer does not have them but before ordering this expensive rifle, i would like to know how its build. your videos are of great help understanding the mechanics and details, thanks a lot

Thanks for this. Only issue I had was that the valve blank cover was not hand tight. In fact it couldnt be shifted with pliers. I wasnt going to try molegrips so had to leave that in place to save damaging it.Also couldnt undo the grub screw holding the valve in the Power Block. It was way too tight and again would have damaged it.

youre clearly not sponsored by fx good honest review

He knows what he,s doing brillant👍

Great vid, roll on delivery 😎

Hi, thanks for your excellent videos. I just wanted to ask. On the M3 where the angled manometer bracket fits there are three screws. The central one being the air supply. Do you know how this is sealed as standard (without the bracket). I've looked at FX's diagrams and it doesn't show any seal, just a dog head grub screw. Many thanks

Your videos are among my new favorites, thanks so much for the stellar work! some questions though: That regulator in front for the bottle looks a lot like the one found in the Leshiy 2- Is it, by any chance, the same generic device and if so could it be a way to give a Mark 1 (Impact X) second reg. ability? And.... how do I find your stuff on ebay? Thanks again !!

Hello i have stripped 2 threads holes on the top plate that holds the scope rail it is M3x10 and M30x8 what is the best method to fix this please thank you

I missed my locking Rod distance! What is the correct measurement of locking rod? (M3 impact)

Great video to disassemble the Fx Impact M3! can you kindly tell me at min 19.35 what kind of cover for the pressure gauge you use? Thank you

Do you have a 3d drawing, my friend? How to get to the left and right surface gas roads?

Are you planning on doing a strip down video for the FX DRS?

hey, im sure your pellet probe will not be allign with the TP , coz i can notice it fr the top plate... u should check it

Hi do you sell the hammer guides?.

I would like to know the diameter and the thread of the new adapter with regulator 1, I don't know but I think it should measure 15mm

Do you know the difference of the M3 barrel than the most updated MK2 barrel? Is there anything different as far as threads in the internal shroud and compatibility? Great video, thx!

How can I get hold of all the tricked out mods you make for my fx the guides etc do you make to order please

Can I remove my scope rail and trigger guard without a full desemble

Hello sir, as several people here i was glad to see at 15.04 what de rateling noise was in my fx but i can see my hammerspring ( the spring i can see behind the quick tune) is moving too when the rifle is uncocked . I can move it with a toothpick 4a5 mm when the powerweel is on 1 . Is this also normal or should this be always under tension ? I've the unrestrickted version (Belgium) . Any help would be much appreciated! Thank you !

nice one 👏

is it possible to buy the tool for C1? I don´t like Rowes tool

on the front cover where the blanking valve, (12.15 time on vid) if this is undone a little bit/a turn or 2, should the power increase, or should it stay the same at under 12lbft?

What make are the Allen screwdrivers you are using here please ?

Hey, hope you get to reply to this comment. I really want to buy a rifle I can take to Belgium with me and once there easily unrestrict it. Then when returning back to the UK take it back down to a sub 12. With the impact mk3 if I remove the trigger and open up the regulator will I then have access to the rifles full power, or is there more I'd need to do / parts to replace? I have a chronometer so returning back to sub 12 wouldn't be an issue, even if it is a little fiddly finding the sweet spot. If this isn't as simple as it seems with the mk3 is there any rifle you could recommend better suited to this purpose? Something that could easily be returned to sub 12 before entering back into the UK.

Great video👍👍👍can you do same with the maverick please

I wondered what that noise was when I moved gun side to side its the hammer ? Well a week on the sick I've watched every one and spent £220 at bagnall and kirkwood 👍

the sub 12 has no barrel tuner i wanted to see how that was made im so sorry your laws suck here if it shot a 50lb bullet at 3000fps using air it would still be simply a air rifle i still dont see how your gov figures its a firearm when its above 12ftlbs theres no fire involved and that is what makes it a fire arm lol love your videos keep up the good work sir

Hey bud. I just got myself and M3 after upgrading from the MK2. Is there anyway I can contact you directly as I have a question about my M3. Any help would be very much appreciated! Thanks.

is the Mk3 a better buy the a Mk2 Impact?

👍

Thumbs up .

can u buy me bow ill pay u extra its hard to find one

Waste of money in sub 12 the M3 . The features that it has are all set up for power .

Hi do you know if the mk3 bottle reg can be fitted to an mk1? Is it the same block thread? Kind regards