Gaggia Classic Pro: How to Clean 3 Way Solenoid Valve

Рет қаралды 120,044

Күн бұрын

Low or no flow from a Gaggia Classic Pro brew group? Learn how to clean/descale the 3-way solenoid valve to fix the problem. Go start to finish in detail through the easy steps to restore flow to your machine. Learn the symptoms indicating a blockage and the relatively simple process to restore machine performance. Learn what causes the blockage and what you need to know to prevent in the future.
Video Contents/Chapters
00:00 Symptoms & Tools
01:25 Open Machine
04:30 Boiler/Parts Removal
05:00 Solenoid Valve
07:30 Valve Disassembly & Cleaning
09:15 Valve Reassembly
11:55 Valve Installation
13:18 Component Install
17:10 Steam Wand Install
19:15 How to Avoid Problems
Related videos:
Process for older Gaggia Classic machines (most 2019 and earlier Classics sold in North America) see this video:
How To Clean and Rebuild a Gaggia Aluminum Boiler: • How To Clean and Rebui...
Other resources:
Support Wiki for Gaggia Classic Pro with troubleshooting, usage tips, how to's, manual, diagrams and more:
wiki.wholelattelove.com/Gaggi...
Support Wiki for Gaggia Classic: wiki.wholelattelove.com/Gaggi...
Get desclalers, parts, etc.: www.wholelattelove.com/
WHOLE LATTE LOVE
Get expert advice on products to best fit your needs. Call the coffee experts at Whole Latte Love:
585-924-7170
Talk to our experts via chat or email: www.wholelattelove.com/contac...
Whole Latte Love on Social Media
---------------------------------------------------------
► Follow Whole Latte Love on Instagram: / wholelattelove
► Follow Whole Latte Love on Twitter: / wholelattelove
► Like Whole Latte Love on Facebook: / wholelatteloveonline

Пікірлер: 410

@depaor01 3 күн бұрын

This demo saved my gaggia and my sanity for the second time! Thank you once again.

@Wholelattelovepage 2 күн бұрын

Our pleasure - thanks for the comment! Marc

@marcoferrero4239 Жыл бұрын

I realise the video is quite old, but it might have just resurrected my most precious possession.. Can't thank you enough ! Hope you get to read this comment..

@Obrerum Жыл бұрын

Es el respaldo de dos grandes: Whole Late Love y Gaggia con sus clientes!!

@5lat5 2 ай бұрын

Along with all the other comments, I wanted to drop in and give a whole lotta love to the whole WLL team. After developing a low flow problem through the group head of my 4 year old GCP, I was able to follow the troubleshooting vids to isolate it to either the solenoid valve or the pump. I then spent my Sunday morning following this vid and am now enjoying a lovely locally roasted coffee again. Thanks team! Your explanations are always clear, concise, and easy to follow. Keep doing what you're doing! Much love from AU 🇦🇺

@Wholelattelovepage 2 ай бұрын

Hey 5lat5, Awesome to hear - thanks for comment! Marc

@a.b6996 2 жыл бұрын

This video saved me from buying a new unit. Thank you!!!

@Wholelattelovepage 2 жыл бұрын

Hi AB, You're welcome! Marc

@sweepthelegjohnie Жыл бұрын

My Gaggia was very slow and then stopped. I followed your instructions exactly and it is now flowing as normal. Thanks so much!

@Wholelattelovepage Жыл бұрын

Hi Justyn, You're welcome. Happy to hear it helped. Marc

@samuelcharris2511 2 жыл бұрын

I have to say that I was afraid to clean my Gaggia, but I got thru it. I feel so proud of myself for fixing a leaking that I have inside of my machine too. Happy to be part of this community. Thanks for this video. It was a crucial part of my fixing my Gaggia.

@Wholelattelovepage 2 жыл бұрын

Glad it helped! Marc

@live4everdad 5 ай бұрын

Thanks for all the videos! They were a big help in getting my 13 year old Gaggia Classic back to working condition after 10 years. It was just sitting there in my shop for all those years because I wasn't getting any flow to the group head anymore. Recently, I came across your videos and figured it might be the solenoid. I still decided to give it basically an overhaul. I took everything apart, including the boiler. I descaled it and scraped the inside of it with a screw driver. I installed a new gasket for the boiler, and group head. I replaced the pump. I really had a hard time cleaning the solenoid. I put it back together, but still, no go. I tried descaler, compressed air a syringe, etc. What worked of all things was just a thin staple that fit in the small hole (that I knew was plugged). It worked!!! Put it back together and I'm in the coffee business again!!! Also, on my old Gaggia Classic, on my last attempt with the solenoid, I was able to remove and reinstall the solenoid without taking the boiler out. Fixing this old Gaggia was definitely worth "a shot." Thanks again!

@Wholelattelovepage 5 ай бұрын

Hi l4ed, thanks for the comment sharing your experience! Gaggia Classics are fairly easy to repair, parts easy to get and relatively inexpensive. Guess it helps to have a resource like ours with videos that guide you through just about anything! Marc

@heinrichv6578 Жыл бұрын

Thank you for this video . I didnt have access to compressed air but a medical syringe did the job perfectly ! I blew the hole with the solution and it threw out small pieces that blocked the flow straight through.I thought this might help someone .Thanks again for this really helpful video!Love from Greece

@Wholelattelovepage Жыл бұрын

Hi H, You are welcome for the video and thanks for the tip on the syringe! Marc

@MarkHachey 2 ай бұрын

Just brought back my espresso machine from the dead. Thank you.

@Wholelattelovepage 2 ай бұрын

Hey MH, happy to help! Marc

@zacharymartino8522 10 күн бұрын

The compressed air tip is no joke. I dissassembled my machine after descaling, and every part of the solenoid was visually clean. Turns out my issue was 100% due to blockages within the channels connecting the solenoid to the boiler (8:57). Even letting it sit in descaler didn't fix it; a can of compressed air, straight down into the small holes did the trick!

@Wholelattelovepage 9 күн бұрын

Hi z, thanks for sharing your experience! Marc

@andriibystrov7546 3 ай бұрын

I just want to say thank you. With your instructions I successfully cleaned solenoid and now machine working perfectly.

@Wholelattelovepage 3 ай бұрын

Hi a, you're welcome and thanks for the comment! Not hard to do. Be sure and lower the calcium content of your source water to prevent reoccurrence if scale deposits were the issue. BWT Water and More filter options work very well. Marc

@s224522 2 жыл бұрын

It really helped! I followed the steps and the water flow of my gaggia pro is from zero to the normal amount. Thank you for recording this tutorial =)

@Wholelattelovepage 2 жыл бұрын

Glad it helped! Keep up on descaling or filter water to reduce mineral level to prevent in future. Marc

@TeftyWind 2 жыл бұрын

THANK YOU! This video had my machine up and running within an hour, and saved me an expensive repair bill. Whole Latte Love is the BEST!

@ag31988 2 жыл бұрын

Thank you so much for taking the time to make this video. I was pretty hesitant in doing this to my machine but I took my time and it fixed the problem. Thanks again 👍🏼

@jeremyellison5621 2 жыл бұрын

Excellent video with step by step instructions. I didn’t have access to compressed air but found that a bicycle pump was a workable option to check that air was flowing through both inlets on the solenoid valve. I hadn’t soaked it for long enough the first time but succeeded at the second attempt and now have a good flow.

@Wholelattelovepage 2 жыл бұрын

Hi JE, Thanks for the kind comment and good on you for finding a work around! Marc

@bryanlau3647 Жыл бұрын

Mark, thanks for putting this out in the world. Super clear and gave me the confidence to try fixing this myself. Only hard part was taking the nut apart on the solenoid valve, but slowly and surely with a wrench and mallet, it came apart. Back to 100% water flow 💯

@Wholelattelovepage Жыл бұрын

Hi Bryan, My pleasure and thanks for sharing your experience which should build confidence for others to have a go! Marc

@johncarriglio8663 7 ай бұрын

Thank you for saving my Gaggia. I followed your instructions to the letter and I managed to clean the Solenoid valve, it works like new.

@alekz861 Жыл бұрын

Thanks a lot for the tutorial video! It guided me perfectly through the whole process and in the end resolved the issue with my machine! So instead of waiting 2 weeks for the service I was able to fix it in one evening 🎉 Keep up the awesome work guys ❤

@Wholelattelovepage Жыл бұрын

Hi Alek, You're welcome! Thanks for taking a moment to leave the comment! Marc

@michaelchu925 3 ай бұрын

Just wanted to say thank you for saving my machine. I couldn’t have done it without this tutorial!

@Wholelattelovepage 3 ай бұрын

You're very welcome! Marc

@rkeil3145 3 жыл бұрын

very well done tutorial, thanks for the time stamps! Notes for anyone else: You don't have to detach the warming plate (though it is easier to have it out of the way) and you can also use vinegar to clean the solenoid body. Thanks again!

@Wholelattelovepage 2 жыл бұрын

Hey robert, You are welcome and thanks for the comment. Personally I avoid vinegar at all costs. Citric acid is a much better descaler and no flavor taint. Marc

@suzanneboutin-irwin7926 Жыл бұрын

Just cleaned our machine, we are so impressed with the tutorial. We used a duster for computer. We are so happy. THANK YOU!

@Wholelattelovepage Жыл бұрын

Hey Suzanne, Thanks for the kind comment and tip with the canned air! Marc

@macsarcule 3 ай бұрын

Soooo much simpler disassembly than the one i just watched! And did it with a cast on! 😃 I feel much more comfortable doing this version, thank you!!!!

@pozzzzy Жыл бұрын

great video, fixed my machine following your instructions step by step. very clear, and I won't lie, seeing you do it with one arm did help build my confidence that I should be able to do it with two hands! thanks again

@Wholelattelovepage Жыл бұрын

Hi MP, You're welcome - happy to help! Marc

@dyswo Жыл бұрын

Thank you for your generosity in making this excellent tutorial video. While I had to do this twice along with descaling twice, my Gaggia Pro is working again like it is brand new. You guys are the best of KZfaq and should get an award! I will definitely buy parts/ machines from you in the future.

@Wholelattelovepage Жыл бұрын

Hey dyswo! You are welcome. Thanks for your kind comment. If recurring scale is an issue you might consider filtering your water to reduce calcium content while maintaining the mineral level needed for flavor by replacing with magnesium. Here are a couple options for that. www.wholelattelove.com/products/bwt-bestsave-s-anti-scale-filter www.wholelattelove.com/products/bwt-bestcup-m-package www.wholelattelove.com/products/bwt-penguin-2-7-l-water-pitcher Marc

@dyswo Жыл бұрын

@@Wholelattelovepage thanks! While do filter my water, this was a case of negligence on my part, but will look into it! Thanks again!

@nickhaslam8067 4 ай бұрын

this excellent video was exactly what was required - coffee machine is now fully operational. Thanks for your help!

@neilgibb5265 6 ай бұрын

Finally, someone who knows, thanks for getting right to it and clearly showing maintenance procedure.

@Wholelattelovepage 6 ай бұрын

Hi ng, you are welcome and thanks for the comment. Marc

@philippk574 5 ай бұрын

Thank you so much Mark! You just saved me an expensive service and got me closer to my beloved Gaggia

@peterpauer4075 11 ай бұрын

Thank you guys for doing this. I followed this manual to descale my solenoid valve. It looks much more difficult than it really is. Now my Gaggia is running with good water flow again.

@Wholelattelovepage 10 ай бұрын

Glad it helped! Marc

@x.x.7646 2 жыл бұрын

This great tutorial helped me to fix my 25 year old Gaggia Tebe. Thanks a lot.

@seppwaldspecht3793 Жыл бұрын

Awesome Tutorial. Did it today with my 1999 GAGGIA Classic and it all worked out thanks to this video. Great Job and thank you

@Wholelattelovepage Жыл бұрын

Hey SP, Thanks for the kind comment! Love hearing "1999 GAGGIA Classic". Why I tell people to avoid appliance grade "espresso" makers and go with a true machine! Marc

@mikewaschka1973 Жыл бұрын

Marc - Thanks for this great video! I followed your video to the letter for the same symptoms you noted with no water from the brew head. I would play and pause as I did the work and voilà!… it worked like a charm! Thank you so much for the self-help videos like this one and the one about descaling and cleaning the machine too! I need a better solution for filtering water now.

@Wholelattelovepage Жыл бұрын

Hi Mike, You are welcome - happy to help! For water filtering check out these BWT options: Bestcup: www.wholelattelove.com/products/bwt-bestcup-m-package Bestsave: www.wholelattelove.com/products/bwt-bestsave-s-anti-scale-filter Penguin Pitcher: www.wholelattelove.com/products/bwt-penguin-2-7-l-water-pitcher All of the above use calcium to magnesium ion-exchange. When used as directed the prevent scale from forming in machines yet retain the mineral level needed for best flavor extraction. Marc

@Chumposaur Жыл бұрын

Thank you for the vid. Perfect description of what my Gaggia had wrong with it and a nice easy fix. I ended up having to pull it out twice, as the solenoid gunked up again when boiler decalcifying, but having done it once, the second time was a breeze!

@Wholelattelovepage Жыл бұрын

Hey Peter, That's great! Repeated clogging can be an issue on scaled machines! Marc

@billdentzer467 Жыл бұрын

This worked perfectly to bring my machine back to life. Great walkthrough. Thanks so much!

@Wholelattelovepage 11 ай бұрын

You're welcome! Thanks for the comment! Marc

@DronesTwinkies 3 жыл бұрын

Marc this is great video, i have a first gen Gaggia i had it for about two years and i descale every month. And just bought a BWT water jug filter as well. And did some upgrades as well bottomless portafilter/upgrades a stainless steel grouphead/rubber and my big purchase was an ECM grinder 64-Manual. Getting addicted to this hobby i am also planning to upgrade the steam wand as well. Great Video, And "Making Coffee Great Again" 🤘

@Wholelattelovepage 3 жыл бұрын

Hey DT, Thanks for the comment on the video. As you might guess I totally understand your addiction :) The BWT Penguin pitcher is a great way to prevent scaling in your machine, keep it running well, it improves espresso flavor and produces great drinking water as a bonus. Nice grinder and betting those upgrades made a difference. If you do the steam wand upgrade we have a how to video for that here: kzfaq.info/get/bejne/q7dxnryIsZnLmmg.html Marc

@dixonmcklacker6210 Жыл бұрын

This is a textbook way to make a easy, friendly, step by step guide to do anything. Thanks for the info and presentation.

@Wholelattelovepage Жыл бұрын

Glad it was helpful and thanks a whole latte for the comment! Marc

@dixonmcklacker6210 Жыл бұрын

Update! I followed the steps and it went flawlessly. Much better than another vid I first saw. Thank you so much. If I need a part or something and it works to ship to Australia I'll get it.

@RicardOliveiro 2 жыл бұрын

Thank you so much Marc. I was wondering why I had such a low water debit and you helped me discover the root of the problem and fix it! Awesome in depth tutorial :)

@Wholelattelovepage 2 жыл бұрын

Hey Ricardo, You are welcome. Happy to help and thank you for taking a moment to leave your comment - it's appreciated! Marc

@MalachiCorliss 3 ай бұрын

I just followed what the video, and it fixed my problem! Thank you so much guys, you really helped save my machine, and my lattes taste even better after fixing this

@Wholelattelovepage 3 ай бұрын

You're welcome - thanks for the comment! Marc

@EvanScottMoore 2 жыл бұрын

Thank you! This worked perfectly to solve the water flow problem, and your tutorial was well-made and easy to follow.

@Wholelattelovepage 2 жыл бұрын

Hey Evan, Thanks for the comment - happy to help! Marc

@seanfoster3379 7 ай бұрын

Excellent video, thanks to this I successfully replaced the solenoid on my Classic, cheers

@dandenham3139 Жыл бұрын

Great videos on this by WLL! I had to remove and clean the solenoid valve twice before I could get flow through the brew head. The first time I did a complete removal of the boiler and replaced the group head O-ring. It was pretty flat. That allowed me to inspect the boiler and group head and see a moderate amount of scale. I blew out the solenoid valve with my bicycle pump, reassembled the machine and still no appreciable flow through the group head. The second time, I only disassemble the machine far enough to remove the solenoid valve. This time I used a fresh can of office air and confirmed the 3-way solenoid valve was totally clear. Before I ran water through the group head, I opened the steam valve to direct water through it in case there were any residual particles in the flow channels. Then I closed the steam valve and voila! My brewing flow rate was better than ever! I am back from depending on K-cups for the last few days and didn't have to buy a new solenoid valve. I really feel comfortable working on this machine in the future. But now I'm challenged to do back flushing and cleaning on a more consistent basis.

@Wholelattelovepage Жыл бұрын

Hi Dan, Thanks for the comment on the videos! So happy to hear you're off the pre-ground in plastic!!! I'll add one more challenge top back flushing and cleaning... Filter your water to prevent scale in the first place. Reduce the calcium content you can prevent this issue in the future. We recommend BWT products which use ion-exchange to replace much of the scale causing calcium with magnesium. That gets you no scale and great flavor - it's better than traditional sodium based softening. Their Penguin Pitcher is what I feed all reservoir machines with here in the studio: www.wholelattelove.com/products/bwt-penguin-2-7-l-water-pitcher Or there are in reservoir options: Bestsave: www.wholelattelove.com/products/bwt-bestsave-s-anti-scale-filter Bestcup: www.wholelattelove.com/products/bwt-bestcup-m-package Hope that helps! Marc

@oliviercaissy3567 Жыл бұрын

GREAT tutoriel , had problems with the valve , followed your instructions and now , works perfectly ...thank you

@Wholelattelovepage Жыл бұрын

Great to hear and thanks for taking a moment to leave your comment! Marc

@SpencerMcEwen Жыл бұрын

Thanks for this. Clear and easy and exactly what I needed to do to get my Gaggia Classic back to making crema again.

@Wholelattelovepage Жыл бұрын

Hi Spencer, You are welcome! Plugged solenoids are often the result of scale accumulation. Might want to descale more frequently or treat water to eliminate scale potential. We like BWT products for that purpose. Here are 3 options that prevent scale when used as directed BWT BestCup: www.wholelattelove.com/products/bwt-bestcup-m-package BWT BestSave: www.wholelattelove.com/products/bwt-bestsave-s-anti-scale-filter BWT Penguin Pitcher: www.wholelattelove.com/products/bwt-penguin-2-7-l-water-pitcher Marc

@alexandriaaragon1409 4 ай бұрын

My gaggia is flooooowing now!! Thank you so much for this vid! It definitely is a lot easier to fix than it looks. Great vid, off to make a latte! :)

@Wholelattelovepage 4 ай бұрын

hey a, That's awesome and you are welcome! Marc

@Frybrainzr1 Ай бұрын

Just did this, fixed my very low flow issue, thank you, very well done.

@Wholelattelovepage Ай бұрын

Great to hear - thanks for the comment! Marc

@jasoncalvert1109 2 жыл бұрын

Thank you, needed this video to clean my solenoid. Worked exactly as he described. Excellent video Mark

@Wholelattelovepage 2 жыл бұрын

Hey Jason, Happy to help and thanks for the kind comment. For future reference here's a link to our support section for the Gaggia Classic Pro. It's stuffed full of videos on maintenance, techniques and troubleshooting: support.wholelattelove.com/hc/en-us/sections/1500000384362-Gaggia-Classic-Pro Marc

@richandersen6980 11 ай бұрын

I don't have access to an air compressor so I used a floor pump (for bikes) with a ball pump needle attached. Worked great.

@Wholelattelovepage 10 ай бұрын

That's a great idea!

@muse1988 2 жыл бұрын

Whole latte love - I’m sorry I live in NZ otherwise I promise I would be customer. You’re an absolute legend in helping me getting my coffee machine back working!

@brutal54 Жыл бұрын

After 15 months of ownership, water started POURING out of the overflow pipe while brewing. I cleaned the solenoid as per your excellent video. No change. I ordered a new solenoid from you folks. I just installed the new part and YESSS...workie like new! So I'm enjoying a 4pm latte now..usually only one a day in the morning for me. Another cleaning tip I read somewhere: Use a hypodermic needle (if you have one) to poke around in the solenoid valve holes to remove scale along with the other methods described by Mark.

@Wholelattelovepage Жыл бұрын

Hi Phil, Thanks for sharing your experience and the tip! I'll add treating water to reduce calcium while maintaining mineral level by exchanging Ca for Mg can help prevent scale issues to begin with. 3 easy ways to do that: BWT BestSave Anti-scale pad filters: www.wholelattelove.com/products/bwt-bestsave-s-anti-scale-filter BWT BestCup in reservoir plumbed filter: www.wholelattelove.com/products/bwt-bestcup-m-package BWT Penquin Pitcher: www.wholelattelove.com/products/bwt-penguin-2-7-l-water-pitcher We like BWT products as they are the only filters out there using patented calcium to magnesium ion-exchange. Leaves you with mineral level needed for flavor but prevents scale. Sodium based water softeners work as well, but those underperform in taste tests. Magnesium is a better mineral for flavor extraction than sodium. Marc

@user-jf9mu5yj3o 2 жыл бұрын

Thank you so much for this, followed it step by step and my machine now works perfectly. Excellent tutorial.

@Wholelattelovepage 2 жыл бұрын

Glad it helped! Marc

@benvoyons626 2 жыл бұрын

Same here!

@MrBlackstarz 2 жыл бұрын

Really appreciate the care taken to explain everything in this video. Very helpful!!! Thx so much

@Wholelattelovepage 2 жыл бұрын

Hey SB, You are welcome. Happy to help and thanks for taking a moment to leave your comment! Marc

@blueconcretezebra 3 жыл бұрын

Nicely detailed. Good to know it's a job more-or-less anyone can tackle. It's a good advertisement for the Gaggia Classic Pro, and by extension all the Gaggia range.

@Wholelattelovepage 3 жыл бұрын

Hey bcz, Thanks for the comment! Marc

@bartjow Жыл бұрын

Just fixed my machine doing exactly this. Thank you so much for this! Greetings from the Netherlands!

@Wholelattelovepage Жыл бұрын

Glad it helped!

@Dynamis77 7 ай бұрын

Thank you so much! This brought my Gaggia back to life! Excellent video.

@Wholelattelovepage 7 ай бұрын

You're welcome!

@Uncle_Tom 4 ай бұрын

This video helped me out so much. I felt like Tim from Home Improvement, the 90s sit com. Thank you

@Wholelattelovepage 4 ай бұрын

Hey Tim or Tom😀 happy to help and thanks for the comment! Marc

@seanmcdonald8708 4 ай бұрын

Thanks! Followed this. Machine now perfect.

@les050964 3 жыл бұрын

Thanks Mark, nice and minimalist approach. Works brilliantly.

@Wholelattelovepage 3 жыл бұрын

Hey UL, Thanks for the feedback! Marc

@franvazquez7750 5 ай бұрын

This video save me a lot of money and time. Even for a dummie like me was very easy. Thanks.

@nicehands18 3 ай бұрын

Mark, you are fantastic - clear, simple, brilliant

@Wholelattelovepage 3 ай бұрын

Glad it was helpful and thanks for the comment! Marc

@teodoros90 Жыл бұрын

Excellent video! You are making it seem so simple. Thank you so much!

@Wholelattelovepage Жыл бұрын

You're very welcome and thanks for the comment! Marc

@Obrerum Жыл бұрын

Hola Marc: tengo una Gaggia con dos meses de uso y se obstruyo el flujo de agua por el grupo, me preocupé un poco, pero gracias a tu video paso a paso pude limpiar la válvula selenoide en menos de 2 horas y ya tengo mi Gaggia nuevamente funcionando!! Mil gracias Marc sus videos son muy útiles y nos dan confianza y tranquilidad con la marca G y WLL. Saludos

@Wholelattelovepage Жыл бұрын

Translation: Hello Marc: I have a Gaggia that has been used for two months and the water flow was blocked by the group, I was a little worried, but thanks to your step-by-step video I was able to clean the solenoid valve in less than 2 hours and I already have my Gaggia working again!! Thank you very much Marc, your videos are very useful and give us confidence and peace of mind with the G and WLL brand. Cheers Hola Jose, Gracias por tomarte un momento para dejar tu comentario. ¡En Whole Latte Love nos dedicamos a proporcionar los recursos para ayudar a los clientes a tener éxito en la preparación de un excelente café y en el mantenimiento de sus equipos! Bagazo Hi Jose, Thanks for taking a moment to leave your comment. At Whole Latte Love we are all about providing the resources to help customers be successful in making excellent coffee an maintaining there equipment! Marc

@arlandakhartan 2 жыл бұрын

I never comment on videos, but I managed to fix my Gaggia Classic (no water was coming from the brew head, but was from the wand) after following this video. Thanks a lot!

@Wholelattelovepage 2 жыл бұрын

Hey Steve, that’s awesome and thanks a whole latte for taking a moment to leave a comment! Marc

@arlandakhartan 2 жыл бұрын

@@Wholelattelovepage Cheers, Marc! You’re one of the good ones!

@VelvetDiva Жыл бұрын

Perfekt, einfach anchvollziehbar und hat mein Problem gelöst. Vielen Dank!

@matthewbessant1501 Жыл бұрын

This has fixed my problem and machine now working lovely. Thank you very much 😁

@Wholelattelovepage Жыл бұрын

Great to hear! Marc

@jestew3 3 жыл бұрын

This is apparently a $150 repair by Long Beach, CA standards. Thanks for the crystal clear, charming walk through!

@Wholelattelovepage 2 жыл бұрын

Hey Jonathan, Happy to help save you the $150 and you're welcome! Marc

@george_taylor 3 жыл бұрын

Good video Marc. I don't own a Gaggia but I watched this anyway because all espresso machine have Solenoid Valves. I wanted to see how you went about cleaning them. It was a useful and informative tutorial which owners of other makes/models will surely find helpful. Thanks!

@Wholelattelovepage 3 жыл бұрын

George, Thanks for the comment. Basic principle applies across makes and models! Cheers, Marc

@mikesax 3 ай бұрын

Very clear.. good lighting ... thank you ... amazing production... very helpful...

@Wholelattelovepage 3 ай бұрын

You're very welcome!

@calisson47 2 жыл бұрын

Excellent step-by-step tutorial! I can't believe you did it with a broken arm!

@Wholelattelovepage 2 жыл бұрын

Hey c, Thanks for the comment! Marc

@ejohanyak271 Жыл бұрын

Thank you so much for this video !

@legacy7024 2 ай бұрын

Thank you very much! So great detailed review!

@MrPantouflard 7 ай бұрын

Glad I came across this. Thanks for erudite description. Saved me time and money.

@Wholelattelovepage 7 ай бұрын

Happy to help! Marc

@donrwhite 3 жыл бұрын

Very clear and informative directions. Thank you.

@Wholelattelovepage 2 жыл бұрын

Glad it was helpful! Thanks for your comment. Marc

@ronyona Жыл бұрын

Thank you so much for posting this video. Saved me so much time and money!

@Wholelattelovepage Жыл бұрын

Hey Ron, You're welcome - and thanks a whole latte for taking a moment to leave a comment! Marc

@pyrogest Жыл бұрын

Amazing. Thanks for great video. Very clear. Shows how simple things are and makes you believe you can do it easily….. i will try the machine now. Fingers crossed.

@Wholelattelovepage Жыл бұрын

Hi Miguel, You're welcome for the video! Marc

@lizellegalaz8554 2 жыл бұрын

This was incredibly helpful, thank you!

@Wholelattelovepage 2 жыл бұрын

Hey LG, You're welcopme and thanks a whole latte for the comment! Marc

@sidstewart7399 3 жыл бұрын

Followed step by step and its worked for me. Many thanks.

@Wholelattelovepage 2 жыл бұрын

Hi sid, You are welcome and thanks for your comment! Marc

@Dustwheel 2 жыл бұрын

I hate you guys before I have to do this. And love you when it works! Thanks for the help Marc!

@Wholelattelovepage 2 жыл бұрын

Hi CL, happy to turn the hate to love! Marc

@peterrope6343 Жыл бұрын

fab video, thanks Mark... was going nuts, had the whole machine apart cleaning it, but had no idea how to clean this part, or that it was so important!

@Wholelattelovepage Жыл бұрын

Hey PR, you’re welcome! Marc

@mohaawwkk 6 ай бұрын

I'm not gonna lie, it was quite cozy to do this while watching your video

@gregmcphee3779 Жыл бұрын

Great video. I feel confident that I can do this job on my machine now.

@Wholelattelovepage Жыл бұрын

You can do it!

@elguerro79 2 жыл бұрын

Thank you for helping me fix my Gaggia.

@Wholelattelovepage 2 жыл бұрын

Hey JLR, You are welcome and thank you for taking a moment for leaving your comment! Marc

@TheJacCottrell 3 жыл бұрын

"A house isn't a home if it doesn't have compressed air." -- Thank you for all of these amazingly detailed tutorials!

@Wholelattelovepage 3 жыл бұрын

Hey JC, Agreed! You are welcome and thanks for the comment! Marc

@rickyzaire8937 2 жыл бұрын

instaBlaster.

@cbeenhackker 3 жыл бұрын

Hi Mark, don't have a Gaggia but still great tutorial and nice to watch and learn. Thank you!

@Wholelattelovepage 3 жыл бұрын

My pleasure! Marc

@vincalf7559 Жыл бұрын

Thanks for sharing! Saved my Sunday ❤

@Wholelattelovepage Жыл бұрын

Happy to help and thank you for taking a moment to leave a comment! Marc

@trunkingham 16 күн бұрын

Great tips on the valve, thanks

@stephenwilliams7839 Жыл бұрын

Thank you for this video. Really helpful.

@Wholelattelovepage Жыл бұрын

You're very welcome! And thank you for the comment! Marc

@Obrerum 11 ай бұрын

Excelente video claro y preciso, gracias Mark.

@saml6915 2 жыл бұрын

This was such a helpful video! Thank you so much!

@Wholelattelovepage 2 жыл бұрын

Hey Sam, You're so welcome and thanks for taking a moment to leave your comment! Marc

@davethetaswegian 3 жыл бұрын

Thanks, very useful information.

@Wholelattelovepage 3 жыл бұрын

Glad it was helpful - thanks for the comment! Marc

@jordanlivingstone5808 8 ай бұрын

Super helpful video. Right on point!! Success with my fix

@Wholelattelovepage 8 ай бұрын

Awesome and thanks for the comment! Marc

@radekrutkowski1389 Жыл бұрын

Fantastic tutorial, thank you!

@Wholelattelovepage Жыл бұрын

Hi Radek, You are welcome and thanks a whole latte for the comment! Marc

2 жыл бұрын

Very helpful! It worked. Thank you!

@Wholelattelovepage 2 жыл бұрын

You're welcome! Marc

@hakugei77 3 ай бұрын

Thank you, your instructions very clear!

@Wholelattelovepage 3 ай бұрын

You are welcome! Marc

@adamschuh2864 5 ай бұрын

Awesome video!

@GP-hf3qi 8 ай бұрын

Thanks to you I have water flow again!!

@Wholelattelovepage 8 ай бұрын

Glad I could help!

@williamlee5769 19 күн бұрын

thank you，I will clean my gaggia tomorrow❤

@Wholelattelovepage 16 күн бұрын

Wonderful!

@tsiggy 2 жыл бұрын

Yo, thanks so much for this instructional video, sir. I had minimal flow from the group head but now it works properly! By the way, I went to the gas station for that compressed air blower you suggested but it was out of order. They had a high pressure washer though!

@Wholelattelovepage 2 жыл бұрын

Hey t, You are welcome - happy to help! Whatever works! Marc

@ccscrew Жыл бұрын

Thanks a lot! Was very helpful

@Wholelattelovepage Жыл бұрын

You're welcome! Marc

@cdvax11 Жыл бұрын

You made that look very simple. I'm now less terrified to try it. 😊

@Wholelattelovepage Жыл бұрын

Hi c, Go for it! Not that hard - and hey, I did it with a bum hand! Marc

@josiahowen5408 4 ай бұрын

Great video. My machine has a PID so when I opened the lid I saw a lot of extra wires. I cannot handle that much. But I work in coffee so I just messaged our head espresso trainer asking for home service! 😅