What’s the name of the glue that u use? The one that I use does keep the pads and lashes in place or takes for ever for me to put the lashes on place

Thank you for the kind comment. It wasn’t until I did brow lamination and used the oil to remove the tint I thought WHY am I using water on the lashes and also the aftercare makes no sense if you are washing the tint out 😂🤷‍♀️

Can we clean tint with micellar water as well?

I was literally thinking the same thing!

Thanks for watching. Happy lash lifting!

Omg did it!?? I love it!

After one month look good or not??

I did mine and it didn’t work :( I had been using m shield and my lashes are really straight so I will try again soon using thre S

@@AleahCollins0 if your lashes don’t like to curl and are super strong, try to leave the treatment on a tiny bit longer too. That’s what made mine work better

Don’t be too hard on yourself, I don’t think it’s that easy to do it on yourself

You are welcome, these are just little things I learnt along the way but the brush getting into the roots makes the biggest difference 💗

I love your techniques! ❤ So helpful! Thank you!

Thank you, great to hear you will keep on lash lifting, it’s such a fun treatment and lasts ages for the client.

Thank you, I always hope something in my videos helps somebody x

Thank you for the kind comment

Thank you, I do a few things differently now but this is a very good way to lift.

Hey where did you buy your lash lift kit and what was it called?

@@brooklynray9536 Hey! I bought the Diablo lash lift kit off their website (the one with 5 sachets included)

😮 wow amazing

Best of luck!

Thanks for watching! ☺️

Heya, oh no! You can relax them, follow the same process without the shields but instead do 1-2 minutes each solution and brush downwards

@@shalahughes6095 yeah they can be so tricky! I use rod shaped and katya shaped ones a lot now

I used to have that issue on some eye shapes until I switched to silicone glue free style shields and rods like ellebana make, they are soo much better and worth switching to, alternatively you'd need to use more glue in that area or tape them down with a bit of micropore tape. With regards to the tint my go-to is blue black, funnily enough it is deeper and darker than plain black, which looks flat. Hope that helps you!

Yes I’d say so or she used the wrong sized shield to lift with.

did you let the glue get tacky?

@@marinaarman8409 yeah I did. I tried it a few times after that it it wouldn't work.

You probably need a different glue

i’m late ik but you should definitely just cut the unnecessary ends off

There is one I found on Amazon that comes in a wee “tub” like a Carmex or Blistex metal round tin. I wish I could remember the name!! It is in a metal pot…I’m sorry I can not remember the name of it but I know you can find it. It is amazing stuff and it works like a glue without the icky part of glue. It works like a darn. IF I can find it I will message again!!! I am doing mine this weekend so I WILL remember!!!!

Thank you, I still love doing lifts 😊 they make a big difference

You got it. Just wipe off excess solution two and then tint lashes. Once tinted you can use a damp cotton pad to wipe off excess of you like, I may have said in this to avoid water but you can rinse after the tint without effecting the lift, I just recommend no water, mascara or oil after completing the final clean (which you are doing to ensure no solution or tint is left in the lashes). Hope that helps :)

@@galaxydreaming oh yes Doll!!! 100% IT HELPS!!! I have felt like SOMETHING just was NOT “Clicking” in my brain and then Voila! I SEE your Video, I HEAR you TALK and it alllll came together for me!! TA DA!!! Thank you SOOOOO MUCH!!!!! I was actually JUST on your store looking to see if you ship to chilly 🇨🇦!!! THEN I “ADD’d” myself and ended up on the Gold Facial!!! LOL! It does not take much to get me to look at something in the flash of a ….ohhhhh…..pretty…..sparkles….gold sparkles…. LOL!!! AND off I GO!!! I HOPE you ship to Canada but if not, sniff….sniff…..I’ll live. I won’t live as BEAUTIFULLY but i will live nonetheless LOL! (Is it just pure gold leaf you are using along with a Serum I presume?). I shall go back and continue perusing your store in the hopes of seeing that YOU DO SHIP TO CANADA!! And WOW did you do a GREAT job of teaching every little step and the WHY to what you do as well….vs….some other channels who just teach and have a “JSUT DO IT BECAUSE I SAID THIS IS THE RIGHT WAY!” Without any REASON……I am not alone in needing to know WHY. Yes sometimes it is obvious but your voice and cadence is just so calming I actually absorbed the information instead of finding my shoulders at my ears by the end of the video LOL!!! You are amazing! Do not stop!! I have pretty much mastered the lash lift and now the tint part will be easy peasy but my next bucket list is to take a Microblading course. And THEN tattoo makeup. A NATURAL look and NOT a BARBIE DOLL or …erhem…..a “lady of the evening” look LOL!!! I do love seeing lip liner done PROPERLY as well as lower eye liner AND My friend is an EMT (I am a Nurse Practitioner - ER and ICU) and she teaches Microblading. MANY MANY years ago I had a “Marilyn Piercing” done on my upper lip and there is still a small “hole”….it was an 18 g he used to pierce it and had I known I would have punched him but alas, hindsight is 20/20…..so, I showed her the wee “divot” that no one but ME really sees and I am NOT the person who wears so much makeup I can just throw some spackle on it and fill the micro divot but….it does bother me. SO….one day when she was touching up my brows, she said, “Why don’t you let me do a Beauty mark there instead because then you could just cover it up with concealer if it isn’t a “beauty mark kind of day”….. I thought “what a great idea”….it took less than 2 seconds and I had a beauty mark! I got compliments on it left and right. I guess she did a great job…..and you KNOW something looks STELLAR when a female gives another female a compliment! And that is what I still get!! OK then!!! I guess I DO like it……and I SHOULD because we are going on Year THREE and it has not faded one iota!!! Can you imagine?? Crazy right? It does look completely natural and I do love it but WHO would have thought it would last THREE plus years????? And to top it off, it was THREE plus years ago that she did my eyebrows and liner…..STILL going strong and no “feathering” or bleeding to it at all!!! So, I figured since I mastered the Human anatomy and can pretty much put it back together without any “leftover parts” which is more than I can say for anything from IKEA….then I must be doing well…..now….onto something fun and new….so why not…..microblading, tattoo makeup (LIGHT)makeup, lip liner (barely there) and some blush and liner and brows. Never have to step into a Boots or Shoppers Drug Mart again LOL!!! So, THANK YOU SO MUCH once again!!! I always find THE BEST people to teach me the right way to do things. It is a gift I swear. I am so grateful I found you tonight!!! I have subbed and added you to instant notify no matter when! I look forward to anything you find that helps us all learn new tips and tricks that only someone with experience knows. My Daddy always taught me that “The secret to success is learning what NOT to do…..sadly, THAT knowledge comes with experience in actually doing it incorrectly at least ONCE. If you do it incorrectly TWICE then I would have to have you ask yourself what aren’t you paying attention to!”. He was a wise wise man and I miss him every day. I could write a book on “Daddy-isms” as he always had something to share that always stuck in my head. ♥️ Thank you for doing what you do for us. It takes a lot of work to put these vids together and make them make sense. You are doing a great job. Please don’t stop!!! Now….back to shopping your store!!! ♥️💋🫶🏻

This video was made when all there was was flat shields to choose from as they were the original kit shields, katya vinog and rods from ellebana were something I discovered later and yes I prefer katya vinog now and rounded rods for downward for sure.

Great to hear!

Thank you for watching the video and the comment :)

Thank you for watching :)

Gosh this is one of my earlier videos, before we had lash lift forums on Facebook to share education with one another, I have learnt a lot since then for sure but this is good for retrospect

Thank you, oh no sorry to hear about your sore eyelid. This does happen regularly with my clients (the glue sticking on) so I use a little bit of the keratin oil to help dislodge the remaining glue. I believe the oil helps dissolve the glue, alternatively eye make up remover but be careful to avoid any product on the lashes for 24 hours as usual

Timing is based on the manufacturers instructions, they can differ, some have longer times for solution 1 opposed to solution 2 then other kits leave solution 1 on longer than the 2nd so I can’t give you general timing. Let’s say though if the solution said 12 mins for a solution and the lashes were medium thickness I might do 10 mins. Tbh it’s about getting used to your kits solutions and following their guide

Glad it was helpful!

Glad it was helpful! Do avoid the water line though.

@@galaxydreaming thanks, do you have any tips for getting the shield on? I always find this so hard

@@lillyspelman2479 For standard shields I gently lift the eyelid back (kind of near the crease) to help lift the lid back and see the lash line better, then I can get my shield close to the lash line and it seems to remove the creases in the eyelid (if you know what i mean) making this skin more smoother to attach to. Hopefully that makes sense? There are newer shields out now that don't require glue and I've tried them, they do work without glue, look up katya_vinog on insta

I’ve had this happen, usually when I don’t use enough glue or my glue was too old or the brand of glue is not good. Usually I bin it if this happens because it’s frustrating as. What I do then it happens is I either use paper tape or glad wrap to force the lashes to stay back.

@@galaxydreaming omg thank you for replying!! So seems like I gotta buy better lash glue or use more glue or buy something else to stick those babies on 😫. I did use saran wrap to hold them in place but that was a challenge in itself. Ugh, it’s always something. Just when you think it should be easy life says “hahaha nope!”.

☺️🤍

Glad it was helpful :)

Thank you so much! I do make asmr videos as well for relaxation :) The glue I use is from a kit called Clione however I recently was given another to try which I have to say is just as good which is a brand called Lash & Go. I was given the glue by another colleague and not sure where she got it but maybe that will help.

You need to consult a doctor

Yay! So good to what that 👏🏻👏🏻

Glad it was helpful!

Thank you for visiting my channel ☺️

A lift will break down the bonds of the hair and reset it so depending on your eye shape and length of lashes it's hard to say which shield

And how do you soothe it ?

You're welcome!

Same process as lifting except you don’t use as shield and you brush them downwards to relax them. Timing usually is less as the lashes are processed. If the tips are bent backwards you may have lifted the ends, next time don’t take solution to tips if you did. I use m1 shield on hooded eyes, it’s usually the most lifted without touching hoods

Lashes pinging off the shield after removing solution one is a beauticians worst nightmare, I hate when this happens, I now keep some lami balm in stock and set them back, I also firmly apply saranwrap over them to keep them on the shield.

Hi what tint are you using??

UHMMMM JUST FOLLOW THE STEPS IN THE VIDEO....

Hi dear from Saudi Arabia 🇸🇦😍 am lash artist..use the tint step after u remove step 2 solution immediately..after u finish tint time remove it than apply solution no3..hope that help ❤

Heya, the longest time depends on the kits recommendations. They can be different, my current kit says 12 for solution one but my old one was 8. Shortest time between lifts is 6 weeks

I use the keratin oil provided in the kit I purchase which is Clione. I don’t always cover lash lifts no

No I didn’t find that it did, any excess you can wipe off with a cotton bud

Thy glue was Stacy lash glue, the key is putting it on and then using a fan for 1-2 seconds to help it get sticky and grip, if it gets too dry apply a little more glue as you push them onto shield

Glad it was helpful!

If you have already tried processing them for the full time you now risk over processing your lashes if you were to do it again with the same times within 6 weeks of the original lift. The only corrective lifts I have done is straight after when a lift has not worked and I’ve put the solution 2 on for a bit longer but kept it at the roots (never to the tips). It’s easy to fry your lashes, you may be best to wait

Thank youu soo much ❤️❤️

Stacy lash on Amazon have a very good lash lifting kit

Ah yeah it’s annoying when that happens, normally 6-8 weeks later, I have re lifted and drastically reduced the times when a lift has an area that hasn’t lifted as well but I stick to the base nowhere near the tips or they will fry. It’s risky tbh and only emergency or if I need to relax lashes if lift too much

Mine are thick and straight and I redid mine 48 hours after and they were fine! I do use Saran Wrap over mine so the lift serum doesn’t dry out; I find it curls way better if it stays a wet serum!

I am from NZ so my supplier is local here, I like bronsun dye and binacil tints and any keratin oil for lashes on Amazon is probably ok

I don’t have one that id recommend adding I’be always had kits that have the oil included. The lift/lamination kit I recommend is from www.designerlashes.co.nz

Thank you I love doing lash lifts, a great alternative option from lash extensions

Yeah sure can

Thank you

Are the lashes completely dry before trying to stick them back? Water or oil on the lashes plays havoc with them sticking back. Also waiting 20 secons or so before pushing back into the glue so that it is more tacky can help but yes sometimes glues are just bad and unworkable

I use the glue that comes with the kit from www.designerlashes.co.nz

Hi, have you tried different shaped eye pads or cutting placing them further down and sticking paper tape over the lashes onto the pads, just make sure you remove the tape first before removing the eyepads at the end as the lashes are smooshed between the eyepad and tape and removing in one piece could pull out the lashes

Hi, not usually, I like to wipe off excess keratin but not dry them, the process is drying so I try to leave the lashes as nourised as possible

Only if there is no oil in it, oily products should be avoided before a lash lift, even up to 24 hours before

Thank you, I loved doing this lift

I have a howto tint lashes video on my channel 😊

Yes it can be fixed by the beautician doing the same procedure but adjusting the time down to at least 1/2 or 1/4 of the time and brushing the lashes downwards to try to process the lashes back to normal. This is a tricky thing to do though as your lashes can easily be overprocessed if the beautican isn't careful and you end up with frizzled looking lashes.

You need to wait 6-8 weeks or you will over process the lashes and fry them, they then become brittle and crinkled, Defo don’t want that

This kit is from Stacy lash. They have a keratin/nourishing oil in their kit

I use the one provided in the Stacy lash kit or a Russian one called protein Botox from designerlashes

I used an m size shield but I prefer m1 or m2

I use the one from www.designerlashes.co.nz

I buy mine from www.designerlashes.co.nz

I use the lash lift kit from www.designerlashes.co.nz

I use the keratin that comes with the through designer lashes but she sells keratin separately also www.designerlashes.co.nz

Thank you, I just use the keratin that comes with the kit

It comes within the stacy lash kit

It is called Reconstructing Treatment on the www.designerlashes.co.nz website

Hello Jacqueline great question There could be many reasons for this Not using the right shield size or maybe not getting the solution right down into the roots would be the main problem people have, also processing time differs between suppliers so following the instructions for timing is best

I do not wet the lashes after solution 1 or 2. I wipe them off with a lint free applicator, I then tint then I rinse with water only. This is because I don’t want to leave any solution or tint in the lashes and I also use a gentle formula. However when using a strong quick working solution 1 and 2 I have in the past used a damp cotton bud to wipe off solution 1 and 2. Depending on your product you can adjust

Hello Marta, good question. I recommend M1 as a good lift without the lashes lifting too high to be in the way

It depends on your lash kit instructions, each is different. You shouldn’t relift for a minimum 5 weeks or you will over process your lashes and they look frizzy