Game Boy Color OLED Screen Full Tutorial
Рет қаралды 21,781
Күн бұрынThe new OLED screen kit for Game Boy Color is absolutely amazing, for sure the most impressive looking screen I've ever seen inside a Game Boy console. In this video I'll guide you throught the steps to install this awesome kit in your own Game Boy Color.
This kit is now available from Zedlabz, discounted link below:
www.zedlabz.com/products/oled...
Touch Laminated AMOLED OLED Screen Drop in Build in OSD RETRO PIXEL Screen Easy Install For GBC GameBoy Color With Pre-cut Shell:
www.aliexpress.com/item/10050...
Get all your modding gear from ZedLabz! (discount applied automatically):
www.zedlabz.com/?ref=d4S68RLA...
Visit my Amazon store front:
www.amazon.co.uk/shop/joebleeps
Affiliate link disclaimer: I may receive a commission if you use the above links to purchase items - you will be supporting this channel at no additional cost to you, so thanks!
Some other videos about this kit that you should check out:
@TakiUdon • This AMOLED Game Boy C...
@JakeSimmons • The BEST Game Boy Colo...
@TheRetroFuture2 • I Made My GameBoy Touc...
@hispeedido4392 • Touch Laminated OLED S...
Music: Joe Bleeps
www.joebleeps.bandcamp.com
/ joebleeps
Camera: Sony ZV-1F
Mic: Rode NT USB+
Hardware: MacBook Pro M3 Pro
Software: iMovie/Keynote
www.joebleeps.com
@paulosergiodossantos7261 3 ай бұрын
Great video, but about your steps sequence: you really should have soldered the wire to the conversion pcb before putting it against the screen. The screen is a sandwich of plastic, and 350⁰C is way more than you need to melt something or at least leave some stain on the screen. You did it very fast so it was safe. But as it is a tutorial, someone couldn't have the same luck I have modded hundreds of game boys and believe me, I've already done all kind of mistakes and loose a lot of parts 😂
@JoeBleeps 3 ай бұрын
I've pinned this. A very good point. I wasn't too worried as it was a quick joint on a board not directly connected to the screen itself but someone else with less experience might run into issues. I'll add the wire first next time.
@gbamck 4 ай бұрын
Nice work, Joe. The OLEDS look fantastic 🤘🏻
@JoeBleeps 4 ай бұрын
Thank you!
@cocopizzagames 3 ай бұрын
Thank you Joe, I was able to follow your tutorial 1:1 and I am excited on my first ever modded GBC ! Easily able to follow all your steps.
@JoeBleeps 3 ай бұрын
Glad to hear that. Congratulations!
@cdp3x 3 ай бұрын
This is a great video and everything is broken down very detailed and simple for someone like me who is planning to do this for the first time. Thank you!
@JoeBleeps 3 ай бұрын
That's wonderful feedback. Thank you!
@HellHatch666 4 ай бұрын
I just got mine in yesterday installed it last night and HOLY COW is it good. I played my GBC for hours after like I was in middle school again!
@JoeBleeps 4 ай бұрын
It absolutely transforms the console doesn't it?
@PerthRetroGaming 2 ай бұрын
Great video Joe, very concise and professional!
@pentacosttb2565 3 ай бұрын
Ordered a kit myself, will be following this when I get it, cheers mate!
@JoeBleeps 3 ай бұрын
You're welcome! And good luck!
@pentacosttb2565 3 ай бұрын
Just finished and it’s working flawlessly. The screen is just astonishingly good now, thanks for the guide, you made it a lot easier.
@JoeBleeps 3 ай бұрын
@@pentacosttb2565 brilliant news! I'm glad the guide was helpful
@aritomiblog 2 ай бұрын
Pretty cool! I need a similar Oled screen for my GBA!
@JoeBleeps 2 ай бұрын
It's a huge difference
@skryfall 3 ай бұрын
Just installed mine. It is hands down the best screen I've seen for a GBC, hell maybe even for all the gameboy line of consoles.
@JoeBleeps 2 ай бұрын
It really is a very modern looking display!
@NonyaDamnbusiness Ай бұрын
I did this mod last week but used a beat-up Dandelion yellow GBC. Very easy mod anyone can do. Never liked the screens with the touch sensors. That felt fiddly. Now it's in a nice ice-blue glow-in-the-dark case with glow-in-the-dark membranes and smoke black clear buttons, power switch, and IR lens. It looks like a brand-new Gameboy Color and I've been playing Pokemon Gold on a BennVenn MBC3000 v5 flashcart as well as an original Mario Tennis cart I had to reflow the solder and replace the battery in to get it to work properly it every day.
@JoeBleeps Ай бұрын
Sounds like a brilliant upgrade!
@xfreakerx1 2 ай бұрын
Thanks for the install help! I'm enjoying the screen though I do wish they added a saturation adjust
@JoeBleeps 2 ай бұрын
Agreed. It is a really nice screen though
@plume... 4 ай бұрын
Funny that the screw getting attached to the speaker magnet actually ended up in improving the design of the tray... win! The screen looks sublime too :)
@JoeBleeps 4 ай бұрын
This is why it's important to test these prototypes, you never know what's going to catch you out haha
@roidnerd2501 19 күн бұрын
I know i commented here before but must have missed part about change colour with flicking down the menu now i know how to change colour would be great to be able to change each 1 different just like i can on my GBA
@miklos7503 2 ай бұрын
Just installed my OLED screen following your instructions, went flawlessly. If you see crazy multicolored vertical lines the ribbon cable needs to be reseated. Screen looks incredible!
@rashawngibbs8218 2 ай бұрын
What size screen is the oled? I want to replace the black laminate lens with a white color.. do you think that is possible?
@miklos7503 2 ай бұрын
@@rashawngibbs8218 Screen is about 48mm x 44mm. I didn't see an option for white in the OLED, maybe only the IPS kits have a choice of color? Not sure
@rashawngibbs8218 2 ай бұрын
@@miklos7503 I greatly appreciate that screen size measurement! Very handy information I needed.
@187StaticMr 4 ай бұрын
Good job, excellent work!
@JoeBleeps 4 ай бұрын
Thank you!
@lp0pic 4 ай бұрын
I couldn't decide on whether I want the OLED screen + original Gameboy parts or the full FPGBC kit, so I'm very excited to see the comparison video of the two. 🎉
@JoeBleeps 4 ай бұрын
It's a tough call, both have their advantages. Just a matter of time before there's an FPGA system with an oled screen though
@JoeBleeps 3 ай бұрын
@@rarenintendo I agree on the uprated screen but I wouldn't want more buttons and speakers, I'd rather keep the original form factor
@JoeBleeps 3 ай бұрын
@@rarenintendo I don't want to play SNES on a game boy though, that's what I'm saying
@chrisavena 2 ай бұрын
Not going to lie i saw the same videos but this one is the best one 😎
@JoeBleeps 2 ай бұрын
Thank you so much! A huge compliment when there's so much strong competition
@killzoneliberation 4 ай бұрын
Yea, I'm also the opinion that yellow fits best to black.
@JoeBleeps 4 ай бұрын
I always loved the yellow DMG and the yellow Pocket but for some reason the yellow GBC never grabbed me in quite the same way. Probably because the rest of the shell colours were fantastic too. That said, this completed build looks beautiful
@salmanrashid6245 3 ай бұрын
Can you imagine if this screen came pre-installed from factory when it was originally released?
@centurioneyt9235 4 ай бұрын
That's the most stunning GBC screen mod I've ever seen in my life ❤
@JoeBleeps 4 ай бұрын
Genuinely the best looking screen I've ever seen in a game boy.
@JoeBleeps 4 ай бұрын
Genuinely the best looking screen I've ever seen in a game boy.
@eathenalexander2836 3 ай бұрын
Need this for gba and gba sp
@JoeBleeps 3 ай бұрын
I wouldn't be surprised if they're here before long
@lucifermorningstar910 Ай бұрын
Damn as some who restored and made a custom back lit GBA 2 years ago, I pray this mod comes to GBA. Screen looks amazing 😍
@JoeBleeps Ай бұрын
It would be great on a GBA!
@JussimirPasold 2 ай бұрын
How does the oled screen brightness compare to the other gbc ips upgrades?
@samluce5033 3 ай бұрын
Awesome video, I was wondering though, I have that same kit in my cart in AliExpress, however I'd like to get colored glass for the screen as seen on the IPS screen that is orange in the beginning of the video. Do you know if AliExpress offers this or if it's not offered for the OLED kit yet? Thanks again!
@JoeBleeps 3 ай бұрын
So far it's just black for these kits
@rashawngibbs8218 2 ай бұрын
Is it possible to buy the oled upgrade with a white lens cover?
@HexoPass- 3 ай бұрын
I just got my hands on a gbc, waiting on the kit to arrive to mod it
@JoeBleeps 3 ай бұрын
Exciting!
@KanyeWestLover12345 Ай бұрын
Great video, i’ve done this mod on my GBC and looks fantastic but looks a bit over saturated. Is there any settings in the OSD menu to make it less saturated?
@JoeBleeps Ай бұрын
Not so far that I'm aware of, just the brightness I think
@roidnerd2501 3 ай бұрын
I just got a stunning Pikachu shell which matches exact same colour as the Pokémon yellow games perfectly and has oled omg its stunning im ordering another 2 of the same from the seller just stunning.
@JoeBleeps 3 ай бұрын
Fantastic! I'm looking at trying some of those printed shells too
@roidnerd2501 3 ай бұрын
@@JoeBleeps oh yeah honestly the one i got stunning comes with custom box and that as well is just stunning just so great that the shell match the Pokémon game perfectly, I wont be modding myself yet but in total i have 2 gba modded 2gbc modded and 1 og grape gbc im aim to get 6 modded and 1 og of each so just need gba og i have cobalt sp as well
@JoeBleeps 3 ай бұрын
@@roidnerd2501 sounds like a nice collection
@roidnerd2501 3 ай бұрын
@@JoeBleeps that is just some of it because of my autism i get the same thing 2 to 3 times over i also got pokemon stadium CIB console limited edtion one 2 zelda 3ds xl 2 ds lites just black ones and thats about it and i got one them gb operator things that lets you use your gbc and gba games to backup saves and play games from pc
@JoeBleeps 3 ай бұрын
@@roidnerd2501 I know that feeling!!
@tommy6742 3 ай бұрын
Haven't touched my backlit modded GBC after I bought the RGB30. It's extremely hard for me to go back to using a real GBC when the RGB30 has a much larger 8:7 display.
@JoeBleeps 3 ай бұрын
I absolutely adore the RGB30. But for me, the original form factor is irresistible
@9000And1Fails 3 ай бұрын
Would the Funny Playing shells fit this screen? Also since the Funny Playing shells have a modified battery compartment, would retrosix's wireless charging battery fit in that?
@JoeBleeps 3 ай бұрын
Yes these are pretty much the same shells. The battery compartment is modified in these too. It works for the FunnyPlaying rechargeable batteries, not sure about the one you mentioned though
@9000And1Fails 3 ай бұрын
@@JoeBleeps Alrighty thanks for letting me know!
@andresgalvez 3 ай бұрын
Is this compatible with the funny playing rechargeable battery mod? (Not the usb c mod)
@JoeBleeps 3 ай бұрын
Yes it is. Haven't tried it yet but a friend of mine did it. No cutting required with this shell
@terminalpower. 18 күн бұрын
Im lost, I did all of the steps got power to the OLED but no games would read. Took it apart made sure all ribbons were in place and nothing. Screen wasnt even taking power anymore. So I resoldered the wire and still nothing, the screen isnt even getting power any more. Idk what to do.
@JoeBleeps 18 күн бұрын
If it worked before you should be able to get it working again. Could be a faulty unit. Have you tried it with the original screen again?
@fz96 2 ай бұрын
Shame that they didn't have a colorful mode for the COLOR letters, so it looks like the real one but lit.
@JoeBleeps 2 ай бұрын
That would have been great. Or different colour text for the "Game Boy" and the "Color" bit
@schavezsilver 3 ай бұрын
Question? Ordered this mod kit same exact one but the Gameboy color logo doesn’t light up and the touch screen doesn’t respond any idea what the issue would be? Thanks
@JoeBleeps 3 ай бұрын
When you first set it up, the Game Boy Color logo doesn't light up, you need to activate that in the settings but if your touch screen doesn't work then of course it won't work yet. So with the touch screen you'll need to check all the connections, particularly the ends of the main ribbon and the small clip connector on the back of the screen. Also make sure no metal parts are touching between the screen assembly and the motherboard. Good luck!
@SGVSOUTHSIDE 3 ай бұрын
So this is what Steve O is doing nowadays after jackass😂
@JoeBleeps 3 ай бұрын
🤣 not heard that one in a while
@lwatsonaddict 3 ай бұрын
Is it possible to combine the FPGBC with the OLED screen??? 👀
@JoeBleeps 3 ай бұрын
not yet but that's what I'm hoping we end up with soon!
@OzDawg1333 13 күн бұрын
Will these fit in OG shells?
@4biddeninja511 3 ай бұрын
Will the front of this shell fit the back of a non q5 shell?
@JoeBleeps 2 ай бұрын
Good point. I'm not sure as I haven't tried but I think it might
@xXhikashiXx 3 ай бұрын
I'm going to attempt an insane build with the oled I'm building a boxy pixel with every mod that's out there the light up buttons with tactile switches
@JoeBleeps 3 ай бұрын
That sounds pretty awesome, will these laminated screens fit the boxypixel shells?
@xXhikashiXx 3 ай бұрын
@JoeBleeps from what I heard yes because boxy pixel can fit q5 screens and the oled is the same but who knows 🤷♂️ once I get it and assemble it ill let you know
@JoeBleeps 3 ай бұрын
@@xXhikashiXx if it fits the laminated Q5 then the oled should fit too
@xXhikashiXx 3 ай бұрын
@JoeBleeps so update the boxy pixel doesn't fully fit the oled screen by like a hair I don't want to break the glass so I will sand down the edge and it will fit
@JoeBleeps 3 ай бұрын
@@xXhikashiXx good luck!
@yekimrelssek2929 Ай бұрын
Do the cartridge pins get in the way at all?
@JoeBleeps Ай бұрын
I've not had any issues with that.
@dallows3235 3 ай бұрын
You reckon this screen would fit into an original GBC shell easily enough? I love my original clear purple shell and would much rather have one of these beauties placed into that instead of an aftermarket shell (they just don’t have that same classic feel to them, which bugs me)
@JoeBleeps 3 ай бұрын
These shells are good, you know. Pair them up with your original buttons and membranes and the classic feel is there. While you can technically fit them in a heavily modified original shell, it would take a lot of work and would be unlikely to have a clean finish. Especially on a clear shell where all your work inside the shell is exposed too
@dallows3235 3 ай бұрын
Yeahh, I get you! They do have a purple clear shell on there that comes with this screen. May just swap it out and stick just keep my original shell neatly boxed away. Different shell + screen but keep my childhood interior, buttons, membranes and what not. Thanks for the reply, buddy!
@JoeBleeps 3 ай бұрын
@@dallows3235 That is the best option for sure. Or even keep your childhood console as it is and always was, and get a whole replacement working console that's maybe seen better days on the outside.
@GreenisYellow 3 ай бұрын
Installed but now screen turns white with games and when I move the gameboy it freezes any suggestions on what went wrong?
@JoeBleeps 2 ай бұрын
Two main possible issues is that either one of the ribbon connections isn't secure, or maybe there's a short between the screen assembly and the motherboard
@gwriter88 4 ай бұрын
Now we need an OLED screen for the PSP!!
@RevolutionFalls 4 ай бұрын
Vita 1000 should suffice for the moment
@JoeBleeps 4 ай бұрын
@@RevolutionFalls I was going to say this, the original vita has a wonderful screen
@gwriter88 4 ай бұрын
@@JoeBleeps Yes, but i want the real hardware with the original resolution, the upscale in vita works well, but you know an OLED screen with the proper resolution will/could be amazing
@JoeBleeps 4 ай бұрын
@@gwriter88 oh for sure
@steveothehulk 21 күн бұрын
In your opinion what’s the best screen upgrade for the gameboy Color regarding screen size and quality ? And what’s the best screen for the gb pocket?
@JoeBleeps 21 күн бұрын
@@steveothehulk although it's somewhat saturated, the OLED is really impressive. The blacks are so dark, it's easy to install, it's laminated so you're guaranteed no dust under the lens and the touchscreen controls give a lot of flexibility
@JoeBleeps 21 күн бұрын
@@steveothehulk as for GB pocket I've only tried an IPs screen and had bad experiences with power consumption. The old style led panels have been more reliable for me on the pocket but I think I just had a bad IPS kit
@steveothehulk 21 күн бұрын
@@JoeBleeps thanks for the reply, one more thing, have you ever modded or upgeaded a gb boy colour? the gb boy colour is a cheap fake gameboy colour? its crying out to be modded as its a really great copy of the gbc
@JoeBleeps 18 күн бұрын
@@steveothehulk I did a prosound mod but it was kind of pointless as the sound chip can't handle proper emulation and won't work with LSDJ
@nicholas.mcintosh 3 ай бұрын
can this screen be used with the FPGBC kit?
@JoeBleeps 3 ай бұрын
I am currently unsure. I was tempted to try but I didn't want to damage anything!
@Macktheclipper 3 ай бұрын
I wish you could buy one of these finished
@JoeBleeps 3 ай бұрын
I'll probably end up building a few more and selling them
@therealeugenius 3 ай бұрын
Is there a similar mod for the GBA?
@JoeBleeps 3 ай бұрын
Not yet. Laminated IPS is the best on the GBA so far. It's really good
@ericjohnson305 Ай бұрын
Is the AliExpress kit the same as the Zedlabz kit?
@JoeBleeps Ай бұрын
Yes it is, there are different sellers but as far as I can tell they are all the same kit
@NinjaFaceGames 4 ай бұрын
Controversial opinion, I prefer 3rd party membranes. On the topic of this actual mod lol, I'm a bit nervous about OLED burn in with this. HUD elements are pretty static in Gameboy games, and I can't imagine these are at like Nintendo quality or anything so could be more prone to it than something like the Switch OLED.
@JoeBleeps 4 ай бұрын
I think that depends on what you play and for how long. I tend to be quite sporadic and I swap games often. It's something I'll watch out for though!
@TheCasius01 29 минут бұрын
It's so annoying i am searching a video trying to explain to me how to manage the real screen and I have only as result videos about these screens. Is there someone who can help me to find a KZfaqr ?
@OrochiSP 3 ай бұрын
I must be super unlucky, I followed all the instructions and my amoled screen doesn't work :( I put the mainboard back into the old shell i had and it worked fine so I can only assume there's something up with the amoled or its components
@JoeBleeps 3 ай бұрын
Sometimes the screen kits can be faulty, it might not be anything you did. Normally you're advised to test the screen first but as it needs the wire soldering for power in this case that's more difficult to do. Try getting in touch with the seller to see about getting a replacement but first, double check the seating of the ribbon cable, the part where the two connectors clip together as this is easy to misalign, the battery contacts to make sure a proper connection is made and also double check your soldering, particularly to see if any connections have been bridged.
@OrochiSP 3 ай бұрын
@@JoeBleeps Soldering has been quadruple checked before I gave up with a headache; The only thing I saw really wrong was the ribbon cable had some black gunk on the smaller end that I tried to clean up with isopropyl alchohol but couldn't really get it off. Looked to be on the contacts where it slots in too. I've explained the situation to the seller now it's up to fate.
@JoeBleeps 3 ай бұрын
@@OrochiSP if alcohol won't get it off, try scraping very gently with the edge of a blade
@OrochiSP 3 ай бұрын
@@JoeBleeps Thank you for the advice! I'll try it later. You're getting a follow for being so nice and helpful
@JoeBleeps 3 ай бұрын
@@OrochiSP ahh thank you! Good luck
@RevolutionFalls 4 ай бұрын
How the frick do you get sand in the power switch?!
@JoeBleeps 4 ай бұрын
A day at the beach, most likely. That stuff gets everywhere. There was some in the speaker too. Noticed the switch was scratchy and uneven so I desoldered the metal casing, dismantled it and found a few grains in there. Cleaned, reassembled and back to normal operation now
@RevolutionFalls 4 ай бұрын
@@JoeBleeps well, at least it works normally now
@JoeBleeps 4 ай бұрын
@@RevolutionFalls absolutely
@iminimal86 4 ай бұрын
I like all your videos 🫶
@JoeBleeps 4 ай бұрын
Thank you!
@jdiv69 4 ай бұрын
I'm lazy. Who do I give my money to?
@JoeBleeps 4 ай бұрын
🤣🤣 well I do have another kit on order...
@RevolutionFalls 4 ай бұрын
I’ll take it
@JoeBleeps 4 ай бұрын
@@RevolutionFalls 😁
@MA-xd9zl 3 ай бұрын
I’ll happily do the job, just love modding things
@FlyingSurprise Ай бұрын
I followed your guide and now I have a completely dead Game Boy Color. Not even the light turns on. I am an idiot.
@camposf 26 күн бұрын
Check if you didn’t bridge any points on the power switch. Clean up the soldering if you did
@iamdmc 4 ай бұрын
I generally like your content but imho you said incredible what felt like 50 times here I'm sure there are more words you could use to describe it, and IMHO if you wanted to stand apart from the crowd making these videos you should have just compared the quality of the OLED screen to the IPS
@JoeBleeps 4 ай бұрын
I did notice that in the edit haha, definitely need some more variety in my superlatives. I'm going to do a comparison video too but I wanted to focus on the build tutorial first
@JoeBleeps 4 ай бұрын
This is good feedback though, I appreciate you taking the time 🙏
@iamdmc 4 ай бұрын
@@JoeBleeps keep up the good work! You do good stuff
@JoeBleeps 4 ай бұрын
@@iamdmc thank you!
@theodorkea3570 3 ай бұрын
'Promosm'
@DeenoSpamone 15 күн бұрын
Its honestly meh. The Q5 screens are still fine.
@MA-xd9zl 3 ай бұрын
I need one for the gb advanced sp 🥲
@JoeBleeps 3 ай бұрын
That would be lovely indeed
Video Game Restoration
Рет қаралды 7 М.
Jake Simmons
Рет қаралды 56 М.