Damn you handled that well for the camera. I freaked out more than you did when I saw the scratch.

Hey mate.. Awesome to see the Grey Ghost finally running.. I have a 347 stroker bottom end I was building up to go in my ‘69 Torino GT Sportsroof but just sold the Torino to my nephew so at least it stays in the family.. I might end up putting the 347 into my Lincoln Mark VII.. Thanks for all of your advice and tech videos over the past few years that’s helped me get the “foxbody in a tuxedo” back on the road.. Dave from down under.. Australia 🇦🇺

I just want to say thanks. I remember watching a video of yours a couple years back where you said just the same thing you did in this one, "It's just nuts and bolts, get after it". I just finished my first heads/cam/intake over the winter and got her running, and she's a ripper. Thanks for the inspiration you always bring into your videos.

I really like the idea of running the fuel line BEHIND the carburetor. Never occurred to me to do this.

I've been building 347s for nearly 20 years and I'm quite fond of these mighty engines. I always run the same cam in the carb'd versions because it runs so good on the street. I actually put one in my friend's 65 Fastback several years ago. It made 404rwhp on a Dynojet Chasis Dyno and pulls enough vacuum for power brakes too. It was a handful at WOT. Nice looking Fastback you got there!

Watching your channel and following along with the Grey Ghost has motivated me to get back in the garage and work on my project car thanks.

I’m so happy to see this car coming together just knowing it’s story in your life and that you’ve kept it for so long. Love to see you and your family enjoying it so much

Man I really like what you did. The car looks fantastic. All this incentive for me on my 65. Just waiting on painting. This summer. Love ❤️ the car.

Love your channel you are such an awesome dude and an inspiration to us all it's been fun following along on the Grey ghost build!!

So damn cool! I always can’t wait until the next video because I want to see her finished but damn it’s been a fun ride. Need to get back to work on my 03 Mach 1, I just got the heads rebuilt

Looks & sounds beautiful...Crisp no doubt. Congratulations bro !

I'm hoping to get the 65 chevelle I've been working on running for 1st in couple of weeks. Excellent job on fastback. I have a tkx in my 69 camaro n I love it n cruising at 80mph down highway n tacking at 2,000 rpms

Sounds great! That 347gonna be a blast in that light fastback! I got a B-41 Anderson up here on the shelf if you wanna throw that in it, not sure when the 351w gonna be ready for it

Your content is the only reason I consistently come to YT. Keep Stangin'!!!

Sounds great! I really do miss the driving dynamics of a good carb. With a manual it feels so connected. Off topic, but I always tried to stay off the clutch pedal as much as possible. Not only to save the throw out bearing, but to not push the crankshaft with the clutch.

N91. Now your talkin. That will be a RIOT with the rest of your combo. Excited to hear it run.

When a carb is dialed, they are dialed! The 460 in my 77 F150 starts like right now.... 1 pump, and bump the key. Love it. Car looks awesome sir!

I have the same cam in my 408. I hope it sounds that good. It would be cool to see a comparison video just for sound purposes. Keep doing what you're doing, brother. Love the content and the vibe of the shop as a whole. #family

I just got my 347/TKX combo together. It’s got the Comp XE282HR cam with the AFR 185 renegades on it and it runs better than it used to with a 100 shot. I still need to get it tuned but it’s pretty crazy so far.

She's a sweet unit. Looking and sounding good, great job. You handled that scratch like a champ.

Car is awesome!!! Proud of you guys. Your Dad will be honored. Take care.💪🏼🇺🇸

I love the classics. Great variety!

So glad everything is coming together on the 65, It's looks Amazing, sounds Amazing, and now Performs Amazing, 😂you should try to Catch Popa T in a first ride, first full pull, video. Absolutely 💯 great job fellas, a lot of Blood Sweat and tears, hard work pays off.

Very cool bro Great job on this build I myself am messing with a 1986 mustang gt having some fun .You got me thinking about my MSD ignition I didnt know you can change the chip in those to change the rev limit keep them coming bro I always look forward to your videos peace!!!👊💥

I can’t wait to see popa T’s reaction to his first ride in it

I think it was a great first run Brother! Can’t be mad at you for scratching it when I’ve done worse to mine.😄 I personally love a NA 347 Bro! 💯

I used to run my 289 with a 4 row radiator and no fan on engine for years As long as I wasn't in stop and go traffic it Never ran hot I did have an electric fan but never turned it oñ

Everything turns out perfect, nicely done build in all respects 👍

I know how you feel about things going so good and then boom the paint gets scratched I was doing great myself then boom a injured foot just two days ago

My buddy did the same thing to the tank on his new Harley Davidson !!

The car is freaking beautiful!

Man it sounds great its probably going to be a bit of a handful once you get it dialed in.

Your stoicism regarding that scratch should be commended

Man that car is SWEET !!!

Dude all you had to do was trim the fan . I did it for my 1969 mach and worked perfect. You cut the plastic with the bolts sit and that should allow the fan drop about half inch. Trim the slots where the bolts sit on the fan itself.

Wow she is sounding so awesome, she sounds like a N/A torque monster, once you get a bunch of the small finished you will love driving her. About the scratch, man it happens to all of us, I put a fresh one on the front fender about a month ago, made me sick.

Nice fastback. It’s only nut and bolts and Money!!

Car is wicked, just needs a X pipe and 3 inch tailpipes. That would make it just that much sweeter sounding.

Nice 65! Are you down there near Colquitt?

I dropped my 69 fastbacks deck lid right after I spent a week repairing the sheet metal and repainting it. I got in my truck and left for an hour. The car looks great. Congrats.

dam you knocked that out of the park! Great work

Have you heard the N81? If i could send you a video of my 10:1 compression 349ci sbf in my fox it sounds really good

Nice build! It's really has taken shape in a short amount of time. Hey can anyone answer this...I have a stock 95 5.0 with gutted cats and no mufflers, I just grabbed up an explorer intake and im getting a set of shorties is tossing a cam in now worth while? I would think even with E7 heads for now a gt40 intake, improved exhaust and a appropriate cam upgrade would make a mild yet nice improvement in overall livelyness, can't imagine it would be unnoticeable, I'd be pretty discouraged if I felt zero improvement lol. Any input would be appreciated.

She Sweet brew2l ....hey what radiator did you go with buddy

I am sure you probably know this but I used a Chevy one wire alternator and eliminated the voltage regulator.

Please tell me you put the air cleaner on before driving this beautiful Mustang around!

This car though!! It's a beaut.

That scratch made ME sick. You handled it better than I would.

Man stop rushing her you brought tears to my eyes scratching the paint off I love my fox but looking at the lay out of that body is just sexy bro get the toe set and take me for a ride a long onc again great job she is awesome bro love it. Trying to get my fox going. Just move to another state so things are really tight right now. Be safe

I watched it like 3 times on the 7:40-7:45 lol I have a foxbody but want one of these so much more!! What would you choose if it came down to it? Foxbody, or Fastback?

Beautiful car

Shit, it happens. Should be less anxiety with the first blemish. It is almost tough to enjoy your vehicle with perfect paint. Best wishes for some compound

Took my fox out in the rain.godda flat..got it home parked in the mud..got 2 flats on the front.....body kit....to low..cant jack it up....gonna have to buy some real low jacks to jack up the rear till I can get a jack under the sides to get the front end up.....

A scratch sux...but from what the car was to what it is now...its amazing

So Awesome brother ❤

Just curious as to why you didn't put the fan in front of the rad instead of modifying the rad?

I would have to fix the scratch and everything in kicking distance. Lol

Do you degree your cams in or just line them up its a good ? Please let me know thanks

God bless brother!

If only pure perfection was sustainable! At least good photos & videos can make perfection last a lifetime!

🔔😎🇺🇸 "Did we tighten the motor mount bolts?" ******* GREEN TAPE 🙄 ******* "NEVER stop until you get to a stoping place." Dad. 👍 As an aircraft mechanic and inspector... If you MUST stop.... MARK your place. You cant just coast to the side of the road in an airplane.. But some tried it. 😎

🔥🔥🔥🔥!!!!

What exhaust system is that?? Just dropped a 347 in my 67 coupe with a tkx and I need to order an exhaust

any rough idea on how much power you are making?

O crap!! Looks sick sounds great… BUT … NO KNIVES WALLET CHAINS OR BELT BUCKLES around the cars … (like you, ask me how I know) 😑

Beautiful car...

what's the mufflers on this? i have a stroker in my 65 fastback and want it to sound like this !

Is this a late -65 ? I had that speedometer in my -66 Fastback.

I would have been puking with that scratch ..

Soo… your sticker was pecking out in excitement at startup and ya scratched the door 👀

Fuel pump seems a bit loud.

Its just a scratch you cant keep them perfect forever shit happens and if its not a trailer queen its going to get rock chips and what not its still an amazing car !

Reminds me of a 65’ I built with my Dad in high school. Paid $400 for it. Cant do that now

I had my car painted one time. shortly after that, i pulled in the garage and put the garage door down. the car wasnt in far enough and a bolt on the garage door put a long SCRATCH right down my trunk lid. well, I was near tears. but thats life. I had it repainted, and now that car is long gone . I can laugh about it now, but at the time, it was rough.

Get rid of the open element breather and install a PCV valve, you only need one breather and a PCV valve…

What cam is that?

I bet it pulls like a freight train , I hit mine in 4th at 3500 rpm and it just about snatched the wheel out of my hands i wasn't expecting that in 4th 😂

🔔😎🇺🇸 That fuel pump sucks.... Not gas, I mean noise... 😐

Why not just build s 351? Youd have significantly better power n torque numbers for the same cost

Rowdy

Cam??

Is it for sale?

Still kinda ehhh about the 289 coming out 😂

Bout seen Brew2l loss his shit!!!!!😬😬😬😬😬

👍

any idea how to drive a manual transmission car?

Isn't the 3g internally regulated?

It must be a screamer.

Man u look so disgusted when u scratched . God I felt ur pain

Get a stock style that’s been beefed up.

On the bright side…..u made the first scratch….😢😢😢

🐎💪👊🇺🇸🙌🔧🚗