Love it when the lads explain it to the audience 👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍

Brilliant leadership, brilliant teamwork. Love watching.

Fabulous to watch such skilled tradesman instructing...thank you

Love the way the lads cut the cake give me the giggles 👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍

Dicovered your channel the other day and now I've watched tens of garden rooms going up! Wonderful stuff thank you!

Thanks Liam, crystal clear on how to do it,, might even give it a go myself sometime , keep em coming, always a great watch

Another Great Presentation, 👍 pint in one hand and settling in to watch the rest!

videos only been on youtube 3 min and ive just watched from start to finish, love it!

That is great video and you have made some good memories for the future. A live build would be great to see!

gotta love the milwaukee

Great video to watch, always interesting, cheers

Another great video. Long and very enjoyable 😃😃.

happy birthday...and thanks for all the tips

🔨 enjoyed watch all your builds

The man and his lads give me the giggles 👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍

The man and his workers do a fantastic job 👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍

I’ve been gagging for another video!! Can’t wait to get stuck in!

less haste more speed. Absolute ***king cowboys!

Another Great Video again you’re the BEST 👍🏻

Хорошая работа.

Nice work, much smoother video thanks. Love this channel.

Great video as usual ,keep up the great work and vids ,look forward to seeing the live vid

Great job you guys do. love watching your videos full of action 100mph work pace lol Looks like Josh is going to be a good addition to the team . Keep up the good work

Great job again

Your garden rooms are awesome very informative keep the videos coming just wished I'd known about you couple of years ago would of definitely had you build my workshop.👍

Brilliant video mate... I notice you're very good communicator, with a good sense of humour... All good bosses have that quality... 😎👍

Happy birthday John...nicecake knife.!

Jon is hilarious lol 😂 😂 John is type of guy you want with you in a Job you hate doing

This video is a marathon, love it 😁

Love the idea of a 24hr build :-)

This is like poetry in moti9n....watching you direct the team to follow and fill in behind your lead...it is a treat to watch, thanks.

Great vid...When drilling the large holes for the steel rods, try an impact driver/wrench with a 'Irwin Blue Groove Wood Drill Bit'. It will go through timber easy using one hand.

Josh looks passionate, be good to see him in future videos.

Seems a very hectic job site !! Buildings look spot on when they are finished though 👍

Happy Birthday John 🎂🎂🍻🍻

brilliant mate this length video was really good and the live one should be a laugh.

Cracking video, bring on a live one 💪

Radio mike and gimble make a huge difference , looking and sounding very professional

Fab work

Nice long video 💯👌 Keep doing what you do best 👍🇬🇧👍🇬🇧👍🇬🇧👍🇬🇧👍🇬🇧👍

Hello I am an avid watcher of your channel and your videos get better as time goes on. I noticed your comment about drilling the holes perfectly straight for the wood to fit on the metal bars. If you screwed 2 3x2 together to make 90 degree corner and then rested the drill in the corner and you wood get perfect holes every time

Come on Liam, use the reverse switch on the milwaukee. Work smarter not harder, so they say. Love the work andove you giving guys an opportunity to work along side you.

Enjoy watching the videos and seeing the end result, but like somebody else said, it’s like everything 100mph, slow down and delegate, give the other guys a chance, and remember health and safety. Keep up the great work.

Great video. Feature length 😁. If there's a sequel, could we see some more about the electrical side of the install? I.e. cabling from mains to room, and first fix? I appreciate this would usually be the job of a qualified spark and not a DIYer but I'm asking moreso out of interest.

Love the vids. Is there a part 2? Don't leave us hanging dude. 👍🏽

Bosch 18v combi drill would fly through the wood for the shoes, the pro one with the metal chuck.

hope them boots are good just ordered a pair 👣🤠

So much better with the gimbal 👍

great vid again,get yourself a milwaukee chainsaw,you will not look back

Brilliant video thank you 👁️♥️👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍

Well about time Shaggy, Welcome back lol

Use a Irwin blue flat bit for your holes. Honestly so much easier!

yeah live would be a good thing to watch

Great video , get urself a impact wrench , u should put rods down further into the ground so u could get a deep reach socket onto the nuts then grind them off

When you join two timbers together you could half lap the joint then put the plates on

H and s 110v and ear protection needed on most sites now👍🏴󠁧󠁢󠁳󠁣󠁴󠁿

The best

Live would be great

Hi Liam love the videos, right up my street. I’ve been doing garden rooms for a few years but not with a foundation like yours. I was just wondering is it worth making hole a bit deeper and putting in say 250-300mm of concrete and letting that harden, then use your system. That way rod can never go right through. It could be overkill. What do you think?

Terrible your spark never told you off for keeping extension lead coiled up when in use 🤪😂 Great work as always tho!

Dream team

"Fucking hell whose the driver" hahaha that had me belly laughing!

I need to work with this Crew.

Please look after your eyes, glasses (light eye protection) are not safe enough for grinders, you need impact resistant goggles. Each spark is 3000 degrees, one in the eye can blind. Take care all. Love the vids and the work.

Sometimes you’ve got to give your rod a little bit of a thrust..LOL

Hi Liam, Thanks for a great insight to these projects. Do you have any build using an existing concrete base without using the rod and shoe approach? I want to build two sheds; 1st job is a tool shed 2600 x 1300 base x 2500mm high (pitched roof) on an existing concrete base. 2nd job is a larger flat (EPDM covered) roof workshop 4500 x 2500 base x 2400 tall on a soil/gravel base. That abuts the back of the house. Would you help with any video links that advise on timber cross sections and build technique? Many thanks and keep the tutorials coming. Dave

Hi there. I was thinking to ask you something. On the timber frame walls they do on the corner one more 2/4 for the drywall. I was wondering why don't you put that corner timber post?

Liam, your work ethic and the constant awareness of your team and their welfare is fabulous to watch play out. I felt like I was on the building site!

The boss is by far the best worker give him 2 nail guns and he's away

Good of Billy Idol to join the team

Hi Liam and Team just a general question. I haven’t seen you do many installations of skylight windows - is it just because clients don’t want them or is there another reason?

sleeper wall!

I belive the beam in the middle is a jack wall👍could be wrong but it's 10 to 2 in the morning and my brains fried😂

Screw the flash liam griffin is the fastest man on the planet, awesome

Where do you get your 18mm osb3 t&g, I can't find it anywhere local to me (pembroke, south Wales) thanks

I've been waiting for a build on an existed concrete base to see how it's done. Have exactly the same situation at mine and want to know how you account for the height of the concrete base in your overall permitted development height? Maybe you're lucky and there's higher points in the garden which I don't have.

Anyone else feeling like buying themselves a 2nd nail gun, just so they can do the Liam double whammy trick? Or is that just me

Do you not use treated wood for the base?

if you cut the notches before drilling there's less timber for the drill to go through might save burning out the drills

THE BLOKE SPEAKING IS GREAT WITH THE NAIL GUNS HE MUST BE THE BOSS AND JEN THE CAMERA GIRL IS GOOD AT TAKING THE PICTURES PLUS GREAT AT KICKING CORNERS IN LOL,WHERE IS THE VIDEO WITH THE FINISHED SHED PLEASE

New drinking game. Every time Liam says Davey you take a drink 😂😂

Sleeper wall

What is that pencil tool you use please.?

Happy birthday John 57 😁😁😁😁😁😅😅😅😅😅

Looking to by petrol chainsaw for normal DIY work What model is your Sthil

I see why your drills are burning out. 😆🤣

speedy gonzalay lol

I like , but washers under nuts ?

sleeper wall

A live build would be the dogs danglies. (I skipped to the end to see where this build got up to before watching all of it).

What was wrong with the first hammer handed to you beings as you couldn’t use it .?

Heavy handed why you need to drill like that.?

Could just use end of the hammer instead of the chisel

Great vid yet again. Sent you a message via your website earlier today. Would appreciate it if you could have a look and come back to me with any thoughts. Cheers 👍

1.5 hours long f/off I’m watching et again

Don’t shout mate, the mic picks you up just fine speaking normally. Great tutorial though!

Ops sorry John 47 😅😅😅😅

Your videos are great to watch but please start taking H&S a bit more serious. Davie looking along the line of the battens without any eye protection while the Paslodes are being used - it is an accident waiting to happen and you only get one eyesight in this life, no second chance.

1:21:16 😆😆😆

And you wonder why you burnt out every drill?