SECRET to FORCE Rubber Plant BRANCH Out Without Pruning

No video

SECRET to FORCE Rubber Plant BRANCH Out Without Pruning

Рет қаралды 514,586

2 жыл бұрын

Thinking how to get a Bushy Rubber plant (Ficus Elastica) without pruning? Here in this video, I have shared a very simple trick to FORCE Rubber plant to branch out without pruning. By pruning, of course we can make Rubber plant Bushy and I already have a detailed video here - • My SECRETS To Make RUB...
Even if your Rubber plant is not growing well or there is no any new growth, try this and I am sure, you would get the desired result.
PLEASE NOTE - This can be applied on any plants including vines too. We get much faster result if we do on vines. Do it with vines if you want to control their growth.

Пікірлер: 335

@kavannahlight5378 2 жыл бұрын

I used your suggestions for pruning and had super great results. This is an amazing technique and easy to accomplish. If you are sensitive, just consider it is plant yoga poses, they will love you for it!!

@GardeningUpbeat 2 жыл бұрын

That's a GREAT news and I am so glad to know about your result! Obviously you have done a great job! Again, loved your humor..ha ha...Yoga poses, that's really nice..he he..

@harjith.d.bubber 2 жыл бұрын

😂

@elsiebenedicto242 Жыл бұрын

@@GardeningUpbeat N

@dawnetaverner1382 6 ай бұрын

You use this technique if you are creating Bonsai of this plant.

@tinanganjibanda6956 Жыл бұрын

I wish I could post a picture. I finally have two new branches on my rubber plant thanks to your pruning technique. So excited!

@BEINGLEO1 2 жыл бұрын

I just laid it on the floor as it grew 8ft tall and was falling down every now and then due to wind. After keeping it laid down on the floor for 2 weeks it gave side branches automatically. (To be noted that I watered it regularly though by making it stand)

@Tamcla 2 жыл бұрын

🤯🤯

@simikapoor8042 2 жыл бұрын

This is really good information,and so easy to do,thanks

@liuka9198 2 жыл бұрын

Did you laid it sideways ( horizontaly)or just laid it on the floor (vertical)?

@raakheemenezes1406 Жыл бұрын

Wow… that’s an amazing tip to follow

@mistert2421 11 ай бұрын

😂

@CereusDatura 6 ай бұрын

I also saw this video sometime last year and thought it was worth a shot. I wish you could upload images in the comments. I had combined a Ficus Aurdey with me Elasticia and since i wanted to keep them together I followed your example and bent them both in almost a complete upside down "U" and anchored them to wooden skewers (like for the grill) I took a photo on 6/13/23 and some in between to record the results and finally the end date was 10/13/23 and the results were amazing. The best thing was that i didn't have any trouble straightening them out. The bending was not permanant.

@MsKylea 10 ай бұрын

I tried this method last year Oct 22 thru April 2022 and the experiment yielded positive results. I conducted the experiment during the off season, so I didnt see new nodes pop up until the 4th month. So, the key is definitely patience!! Thank you for sharing

@GardeningUpbeat 10 ай бұрын

You are most welcome and very glad to know, it worked for you! Thank you very much for sharing your experience!

@johnnykush 2 жыл бұрын

I've found spraying the branches with water often will moisten and promote new growth where those cracks are where the new growth usually starts..but i love the technique thanks for sharing!!

@meadow-maker 26 күн бұрын

there's a very good reason why this works and why it would also work to just prune off the top growth or put the whole plant on its side. This guy didn't go into it at all and I doubt he knew it otherwise he'd explain. just putting it on its side is the simplest way to remove the 'top'

@shleebeez Жыл бұрын

I tried this on a tree with nothing but a single leaf left. Amazing results

@beaolmos2293 Жыл бұрын

Lol!

@sophianguyen6355 Жыл бұрын

You can count the leaves before and after . 2 different.

@indraneelsinha706 Жыл бұрын

😂

@angryzombie8088 2 жыл бұрын

From my bonsai knowledge, I believe those bending create small cracks on the trunk that stimulates branching out. And also of course like you said the tree is looking for more light & growing upward.

@rosshopkins2063 Жыл бұрын

Any basic disruption in hormone flow.

@InitiallyGaurav Жыл бұрын

Auxin

@InitiallyGaurav Жыл бұрын

Auxin induces shoot apical dominance. The axillary buds are inhibited by auxin, as a high concentration of auxin directly stimulates ethylene synthesis in lateral buds, causing inhibition of their growth and potentiation of apical dominance. When the apex of the plant is removed, the inhibitory effect is removed and the growth of lateral buds is enhanced. Auxin is sent to the part of the plant facing the light, and this promotes growth towards that direction.

@francesbuie7267 2 жыл бұрын

I truly love my plants. I call them my babies. Your tips and tricks are invaluable. Tank you!

@GardeningUpbeat 2 жыл бұрын

That's so sweet..ha ha..can understand you love towards the plants 😊😊 We all feel the same..Glad you found the tips useful and thank you very much for watching 😊

@kellycasperhanson4426 2 жыл бұрын

This is amazing. I wish I knew this before! Sadly, I threw away my plant when the leaves dropped off. I thought it was hopeless. Thank you!

@GardeningUpbeat 2 жыл бұрын

Glad you liked it and thank you So much for your words! Wish, I could've uploaded much earlier..:-(

@kellycasperhanson4426 2 жыл бұрын

@@GardeningUpbeat You seem VERY busy, so no problem! How nice to connect across the world❤!

@GardeningUpbeat 2 жыл бұрын

@Kellycasper Hanson, Thinking why you thought that way..perhaps, my reply was not the right one :-( Sorry if you felt bad as I didn't present any .......for your plant. But, obviously felt bad and so I wrote - "Wish, I could've uploaded much earlier.." Anyway, happy growing more plants and totally agree with your words..Internet is a great thing :-)

@InitiallyGaurav Жыл бұрын

@ctoro2711 Жыл бұрын

Are you still making videos?

@InitiallyGaurav Жыл бұрын

@@ctoro2711 yes

@mrscotchguy Жыл бұрын

Ficus have dormant buds in each node. Move your tree outside in the summer and it will usually backbud without much fuss. The reason rubber trees get leggy is we starve them for light by keeping them inside.

@daughterofenoch677 Жыл бұрын

Agree

@SewWhittle 11 ай бұрын

Thank you

@romeezydabreeze 11 ай бұрын

This is true! I left my rubber leaf on my balcony by mistake but I do not regret it. It started to produce buds in 3 areas

@daughterofenoch677 11 ай бұрын

@@romeezydabreeze Hmmmm ? On your balcony ? Maybe I'll try that . Thanks

@husch05 10 ай бұрын

Can confirm, I live in a area where we get cold winters, but this summer, I put my rubber fig outside. After letting it adjust to direct sunlight, It started to bud EVERYWHERE on the trunk! I have like 4 new branches now and it produced beautiful big leaves. I can recommend everyone to put their houseplants outside if possible. Houseplants? More like "winter houseplants".

@nicolegroves6880 Жыл бұрын

I'm so happy that I stumbled across this video!! I was just wondering what to do with my fiddle leaf fig and my rubber trees since they were just growing straight up and it made me cringe to even think about cutting them because they were almost dead when I got them and it's been a long road to get them where they are now. For example, my FLF was bought on clearance for 1.99 because it was basically a stick with two leaves on it. Now it's got at least twenty leaves and it's doing great! So I'm definitely going to try this method rather than pruning her back! Thank you!!!

@devinreading4997 2 жыл бұрын

Wow I’ve been wondering how to save my plant that looks exactly like this one!! I’ll try this and see what happens!!

@GardeningUpbeat 2 жыл бұрын

Wish you all the best and sorry for the late reply!

@Ying-zj2gf Жыл бұрын

Thank you so much for this technique!! I pruned my rubber plant 4-5 months ago and it hasn't grown at all since; instead it actually lost some of the bottom leaves :( Now with the weather turning warmer in the southern hemisphere, I'm hoping it will revive and branch. Could you share any tips on reviving the plant? Thanks in advance!

@prasantbisoi1781 Ай бұрын

Thanks for sharing these valuable informations. The appearance of your sweet baby in the video made me so happy. She is so cute and adorable really I love her. She reminds me of my grand daughter who is now living in Pune. Let God shower His blessings upon her through out her life.

@GardeningUpbeat Ай бұрын

You are most welcome Sir and thank you so much for your kind feedback, really appreciated! Take care and sending lots of good wishes!

@sprigsofrosemarie Ай бұрын

Thank you very much for this tip!! I'd never come across it before :D The updates when the new growths were showing were great!!

@GardeningUpbeat Ай бұрын

Glad you liked it and thank you so much for your feedback, appreciated!

@heythere3163 2 ай бұрын

This method worked for me, I've bent my plant before summer and it started growing two new branches after 3 months. The plant growth affected during summer, I don't if that is the reason why it took so long to show branches. Thank you sir.. It helped me a lot..

@zzzzojka Жыл бұрын

It's mindblowing! Thank you for the video, I have a small rubber plant with a soft bendy stem, that would be a fun experiment. And I Iove your accent, you make english sound way more interesting! (Not a native speaker myself)

@PauloOliveiraCelular 3 ай бұрын

This technic is very common in bonsai. People do this to force the plant grow branches in specific places. It really works!

@qaphqa 2 жыл бұрын

Thank you for this! I am starting to have results from your pruning technique, it's exciting!!! ♡♡♡

@GardeningUpbeat 2 жыл бұрын

You are most welcome and I am so glad to know about your result, GREAT job indeed! One more thing - I believe you have noticed there was no music in the video..ha ha..did that just for you! Not all time it's possible as lots of constructions works going around here and busy roads nearby..but, whenever possible, I would do it!

@qaphqa 2 жыл бұрын

Aww, THANK YOU! !! :)

@ShyDog827 Жыл бұрын

I’m very impressed by your technique .I think I much prefer your method over pruning, especially when you have only a single stem👍🏻

@GardeningUpbeat Жыл бұрын

Glad you liked it and thank you very much for your feedback! Yeah, if it has a single stem, it is better to follow this. But, we can get good result by pruning too..I did same for one of my plant (having single stem) and result was quite satisfactory. Have a video in case you are interested in watching - kzfaq.info/get/bejne/eJmIkshnqci4oWw.html

@tracyloeffler7616 2 жыл бұрын

I can't wait to try this. What an amazing idea!! Thank you for this as well as your other videos.

@angelaberni8873 4 ай бұрын

Oh my goodness. This man is BRILLIANT!!! And I've just subscribed.

@anniedey5781 2 жыл бұрын

Even notching and making rings around the stem helps in getting side branches I've done it on all ficus group of plants and was successful. Anyway thanks for your new method.

@GardeningUpbeat 2 жыл бұрын

Yeah, that also works and thank you very much for sharing your experience here, appreciated! Have a you tried the same method (in reverse way) to control the height of the plant? In some plants, we can do that. But haven't tried on Rubber plant yet. Please let me know your experience if you have done.

@obscurazone Жыл бұрын

Notching has never ever worked for me. Ive tried it on three different plants, multiple times, all now 6 feet tall. Nothing! Not even a single bud. The plants are all super healthy though. Gonna try this method starting today.

@cathleensmith4717 2 жыл бұрын

I propagated my Ruby rubber plant its doing well I have two trees in that pot and did a cutting from each tree. One cutting do well othe has not rooted nor has its new shoot opened after a month. I was cringing the whole time you were helping this tree great job Sir!

@arieloxford6790 Жыл бұрын

Amazing! Does the plant straighten out again once you release it from the wires?

@anythingbootneck Жыл бұрын

Good question, I was thinking the same. Hope you get a reply.

@williamgoss4691 3 ай бұрын

That’s a very interesting and very useful tip for avoiding a leggy plant, thank you very much.

@ProperPlantPeople Жыл бұрын

Thank you. I'm going to try this with my rubber plant. It has nice new leaves but no branching.

@tarantaro684 10 ай бұрын

Yes its worked..it happen to me by accidentally i dont give attention to my leggy rubber tree then it goes bending for a month and suprisingly they start growing new branches 😊 100% agreed this method..also it happen to other plants too..natures finds there ways to live,,AMAZING

@GardeningUpbeat 10 ай бұрын

So glad to hear it and thank you for sharing your experience! And totally agree with you, happens with any plants and I usually do it with vines to control them and to make them bushy :-)

@princepalmer3329 Жыл бұрын

Im gonna try this. My elastica has not grown at all since i got it last summer. Now it has two big leaves that are hanging straight down along side the stem after the other 7 fell off one by one about 1 a month. Thanks so much for this Vidio so glad it came up in my notifications. Have definatly subscribed and nice one for the subtitles. Helps alot.

@taharatusahmed5744 7 ай бұрын

Hello. I had followed this technique and it was a great success. Thank u so much for providing this information ❤

@carmelcallan8195 Жыл бұрын

Very excited to try this technique on a plant. My father-in-law gave me many many years ago. It has many branches, but very few leaves.

@y05h1 2 жыл бұрын

Hi, I am a Japanese fan of your videos. Regards from Tokyo.

@GardeningUpbeat 2 жыл бұрын

Thank you SOOOO much and I am being honored! Happy Gardening 😊

@rekhakhanal8319 2 жыл бұрын

Wow! This is something different! Loved it!

@GardeningUpbeat 2 жыл бұрын

@Rekha Khanal, Glad you liked it and thank you for your words Rekha!

@rnkim2564 11 ай бұрын

you are so clever about plants ... and i consider you the plant whisperer ( if you saw movie: the horse whisperer)... amazing ideas

@debbiefox6846 2 жыл бұрын

So this has similar aspects in it to Bonsai methods. Makes perfect sense. Have a ? Do you twist the plant the opposite direction to get new growth encourage on they other side so the plant is fairly symmetrical all around or does the plant spout on bottom side that is shaded and then correct its self when you return the plant to the upright position? Hope this ? Makes sense. Thanks 😊

@GardeningUpbeat 2 жыл бұрын

@Debbie Fox, You are 100% correct 😊 Mostly used in Bonsai..and even on Adenium too to force them to produce more branches. Twisting is not necessary..or else the stem might break. Actually, kept the growing point facing west (as there is a wall just behind the plant) This way, it had to produce new growth which can get more light from east side. But anyway, doing exactly same like me is not necessary (like, keeping behind a wall and facing to west). All plants would produce new growth because of their natural growing habit. If I cut the rope, it would correct itself in coming days. For that, I would just need to make sure that it's getting light from all side. If it's not possible, we can just adjust the location of the plant based on the direction of the light. All plants always bend in case there is a wall behind it and light is coming from other side. I hope, I have answered your question..if somehow I got it wrong, please let me know. Thank you!

@bharanimehta5453 2 жыл бұрын

Wonderful method. Love your suggestions... What I like most is your updates..

@GardeningUpbeat 2 жыл бұрын

Glad you liked it and thank you so much for your words, much appreciated!

@Madoladiinxs Жыл бұрын

Great Video and very interesting to make the plant busy. I have a very large plant in a pot outside (Western Australia) lots of sun therefore growing very high with some branches sparse of leaves. Pruning has resulted in more lower leaves, happy with this. My concern is how to keep the plant a reasonable size (currently two (2) meters high) and busy as it a main feature of my entry. Will pruning the top cause the plant to be root bound. Thank you. I enjoy your videos and great advise on rubber plants.

@deepakjain8135 Жыл бұрын

Thanku sooo very much sir iss tarike see mera plant me kai sari new branches aa gye.or achcga grow kar raga hai

@donatablinkeviciute5951 Жыл бұрын

Great video! Is it possible to achieve such results even if the stem still has leafs or should I remove some and then try to bend it? I have my rubber plant for almost 4 years now, unfortunately it has only one stem. Tried your other method last year (by pruning the top part) unfortunately my plant just kept growing as usual, haha.

@GardeningUpbeat Жыл бұрын

Glad you liked it and thank you so much for your feedback. Sure, it is possible and please avoid removing the leaves. You can bend the stem without even removing any leaves. Again, sorry to hear that Pruning didn't work out for you. Normally it does if all goes well (need hard pruning). Anyway, sometimes plants just like to behave in their own way..he he..and don't grow like we want. I have pruned many of my Rubber plants (including the one I have shown in last year's video) again and soon I would share the result. Thank you!

@JohnDennery 2 жыл бұрын

I saw some massive rubber trees in mexico this year and most of the branches actually point downwards but they don’t branch out. So I think you damaged the stem which is causing the growth lower down. Interesting technique though! Are you planning to straighten the plant back up or will you be pruning the top once the new shoots fill in more? I’d love to see an update in a few months. Thanks for sharing

@grumpy_ken Жыл бұрын

no as this same effect can be had by simply laying the plant on its side

@shivangnisharma9448 2 жыл бұрын

I had used this technique on my leggy Banyan bonsai, most grew branched & a few areal roots, next I’ll chop off the ends during monsoons to get compact canopy 🤞

@GardeningUpbeat 2 жыл бұрын

That's great to hear that you also tried and it's growing well..All the best with your Bonsai!

@rahulshrama94 2 жыл бұрын

If you want bushier rubber plant simply cut or remove the new growth from the top.. And than see the magic... Tried and tested Successfully.... My tinke fully lush and bushier 🍀🌱🌿💯🙏

@neonice 2 ай бұрын

Your garden is beautiful ❤️💐

@GardeningUpbeat 2 ай бұрын

Thank you so much 😊

@Mobijub 2 жыл бұрын

Thanks for sharing mate! This is a great video, keep it up 🤟😃

@torquess454 Жыл бұрын

Bonsai rubber plant with that wire! Brilliant

@stephaniegoodmorningsunshi158 Жыл бұрын

Nature is Amazing! Thank you for sharing!

@GardeningUpbeat Жыл бұрын

You are most welcome and thank you so much for your feedback, appreciated!

@eysha7122 Жыл бұрын

Success !! Thank you so much 👏🏻 so amazed it worked for me

@jovel7684 10 ай бұрын

Omg his right tysvm I did this midsummer its fall now and wow too many babies came out

@GardeningUpbeat 10 ай бұрын

So glad to hear and thank you so much for sharing your experience, AWESOME!

@peggymalabuyoc9150 2 жыл бұрын

This video is so interesting and informative. I can’t believe how you transformed this plant! Amazing job. So enjoyable to watch. Many thanks! 👏🪴🥰

@GardeningUpbeat 2 жыл бұрын

Glad you liked it and thank you So much for your words, much appreciated!

@chinmaysangoram Жыл бұрын

Thanks a lot for the video.. Helped me a lot in developing lower branches on tulsi plants..

@GardeningUpbeat Жыл бұрын

Sorry for the late reply n glad to here it did work for you!

@87ylc 2 жыл бұрын

Very interesting method! Thank you for sharing! Never seen this before. How much time has passed between each step?

@GardeningUpbeat 2 жыл бұрын

Glad you liked it and thank you so much for your words! I have shown the Timing on the screen (Top-Left corner) like After 35 days..n so on...

@cindyshirey8561 2 ай бұрын

WOW ! Common sense ! Plants WANT TO GROW UP ! Bet others do this too ! Thanks !!

@swarnopunk Ай бұрын

what would be the best fertilizer for rubber plant ? I think you have the best knowledge about this

@cattycorner8 3 ай бұрын

I am sitting here very shocked! But I see it does work!

@quack-head0 6 ай бұрын

SORCERY! How clever! 🤗

@madhavitankala3308 4 ай бұрын

Ya it’s true…amazing. I tried this technique 😊

@GardeningUpbeat 4 ай бұрын

Thank you so much for your inputs 😀

@adelepattonxxx 2 жыл бұрын

Thankyou! That's really helpful. I had my rubber plant lose bottom leaves in winter as it wasn't getting enough sun, i put it up on a stool to get sun, too late. Will definitely try this. I have four trunks one has lost all leaves- is that one beyond help,

@user-zu8oe8cp9b 2 жыл бұрын

Very creative! I'll try.

@priyapriya-rk8zo Жыл бұрын

I just tried this method on my verigated rudder plant on 28july iam waiting for the result...At 1st i was so scared to do this for my plant but after reading yoga pose in comments...iam convinced😂

@sushmagrover8047 2 жыл бұрын

Very good informative video ....I killed my rubber plant earlier last summer ....never tried again due to harsh weather here ....very effective tips ...thanks for sharing

@GardeningUpbeat 2 жыл бұрын

Thank you so much for your feedback and sorry to know..Since it's too hot over there, I believe you can grow all these Heat Tolerant plants - kzfaq.info/get/bejne/bbNhZM2mv8euj2w.html It's an old video and I would try to update the list in coming days, thank you!

@jutikadas8769 2 жыл бұрын

Nice! I will definitely try this method.

@GardeningUpbeat 2 жыл бұрын

Wish you all the best :-)

@caches75 2 жыл бұрын

Awesome video! Can you do this to a Fiddle Fig Tree? If yes, do you have a video for it?

@bedtimereads9855 2 жыл бұрын

I was cringing while watching him bend the plant. My mouth was gaping open expecting the worst! And suddenly the caption said, "Feeling bad?" HAHAH yeah I can't imagine trying it on my plant. My clumsy self might accidentally snap it in half. 😅

@user-dx2nf2kt4n Жыл бұрын

Thanks a lot! Very informative! Though I have a question how to deal with the "opposite" side of tank when we have new multipul growth points on the other side. How to bend and not to damage new growth?

@jaetrnn6000 4 ай бұрын

I love how it looked like he snapped the plant as if assassinating someone 😂😂

@GardeningUpbeat 4 ай бұрын

Ha ha 😂😂..liked you comment very much, never thought about that..

@alingfepay9470 Жыл бұрын

Very informative topic,ang ganda ng rubber plant😢

@arakis1919 3 ай бұрын

Please give some advice about the sunlight requirements for a variegated rubber plant....I would be grateful to you

@GardeningUpbeat 3 ай бұрын

Different varieties and so providing requirements differently - Rubber plant ruby [Please note, this is mostly popular as variegated Rubber plant] - It can tolerate full sun in Winter. But in Summer, 4-5 hours of morning sunlight is okay. Too much harsh sunlight is not ideal..or else, sizes of the leaves may become smaller. Tineke - Prefers filtered sunlight or very bright light. In the video, I have worked on this variety. I hope that helps...But now a days, in market other Variegated Rubber plant is also available as Ficus Yellow Gem, Shivereana etc..

@arakis1919 3 ай бұрын

@@GardeningUpbeat thank you I have a tineke and its two lower leaves shedded maybe because I kept it in low light place

@GardeningUpbeat 3 ай бұрын

You are most welcome...yeah, that could be the reason. Generally, Rubber plants don't prefer low light even though many said so..

@Robert_A_Keyboards4948 6 ай бұрын

THIS is different! I have never seen this before!

@Veej77 Жыл бұрын

Great technique!🤗

@radheradhegardening5412 2 жыл бұрын

Beautiful plant Useful information

@MyPlantWorld 2 жыл бұрын

Very useful video I must try these tips

@ajaydalaya2195 2 жыл бұрын

No pain No Gain.

@MrsLoya-er8nl 2 жыл бұрын

I’m shocked!! 🤯😳 my plant is very leggy looks just like the first plant I’m so scared to bend it. Once the leaves come in at the lower part of the stem then what do you do untie it and does it straighten back up?

@GardeningUpbeat 2 жыл бұрын

@Mrs. Loya, Please don't get scared to bend the plant..actually, it's quite safer than pruning. >> Once the leaves come in at the lower part of the stem then what do you do untie it and does it straighten back up? We just need to simply cut the rope and it would grow like normal plants. But, we can help the plant to do that faster simply providing the light from opposite direction. Means, if the main stem was aiming to the left side, provide more light from the right side (after cutting the rope). Eventually, it would straighten up itself. I would update it soon...Good luck :-)

@arzuhsr Жыл бұрын

Harika bilgiler çok teşekkür ederim

@mrxman581 Жыл бұрын

Would you get similar results if you placed a grow light facing the stem where you want leaves to grow without bending the stem?

@karminnelson Жыл бұрын

I was considering this idea, as I'd like it to grow branches all over, not just off one side.

@pradeepsingh6485 Жыл бұрын

Wonderful idea 👍

@DrAlpanaBhartiGynecologist 4 күн бұрын

Thank you

@GardeningUpbeat 3 күн бұрын

You're welcome and thank you for watching!

@anthonyservice9147 28 күн бұрын

Great video

@GardeningUpbeat 26 күн бұрын

Glad you enjoyed it and thank you for your feedback!

@Ekirea 2 жыл бұрын

Clever,thank you for sharing!

@kedaipasupokokbajatanah1840 2 жыл бұрын

Tq for this info... allowed me to share this video whit others.😊

@GardeningUpbeat 2 жыл бұрын

Most welcome and thank you so much for doing that, really appreciated 😊

@ginarosales8314 2 жыл бұрын

I hope it will work for my rubber plant😍great😍

@atomant_7 2 жыл бұрын

That is amazing well done 👍

@GardeningUpbeat 2 жыл бұрын

Thank you so much 😀

@peligraso 10 ай бұрын

my rubber plant's stem is too hard due to being tall already and i need to do the same fix you've explained in this video. for harder stems, what would you recommend? thanks for this informative video.

@blessedlove3183 2 жыл бұрын

that’s beautiful I had my rubber tree for 4 months no new leaves yet I cut the tip (without the leaf just the tip)at the top part to bloom new leaf,I’m nit sure if I did it right, or should I cut the tip with a leaf also? please let me know if I did the right thing

@Seekay-oe3qz Жыл бұрын

Logical ie. U turn the leaves away from the sun & the plant will generate new shoots aimed towards the sun bec of photosynthesis.

@gdiana8357 Жыл бұрын

i would love to see more updates on this!

@GardeningUpbeat Жыл бұрын

Sure, I would do very soon..thank you :-)

@bubble7editz Ай бұрын

Hi Sir. My rubber plant is drooping so I kept it in the sunlight and now it is completely drooped. What should I do?

@ml.5377 10 ай бұрын

Wonderful, thank you.

@indiagkv2003 Жыл бұрын

I follow your idea । It is realy amazing ।

@cillamoke 11 ай бұрын

Great stuff!!

@natureloversplace745 2 жыл бұрын

Thanks for sharing 👍 😊

@GardeningUpbeat 2 жыл бұрын

My pleasure 😊

@bigboy6704 2 жыл бұрын

Just started this on my elastica robusta I'll report back in a couple months!

@GardeningUpbeat 2 жыл бұрын

Wish you all the best :-)

@purplewine000 2 жыл бұрын

Can i prune my black prince rubber plant even though it is only 1 feet tall? Thank you

@GardeningUpbeat 2 жыл бұрын

Sure, we can..but, please avoid doing hard pruning. You can just pinch the new growth from the top or bit more if you like. Wish you all the best!

@purplewine000 2 жыл бұрын

@@GardeningUpbeat thank you for the tips

@LIZZMWANGI 17 күн бұрын

can i do this to my schefflera plant

@josyrinque9837 Жыл бұрын

Thank you so much.tha's great!!!

@GardeningUpbeat Жыл бұрын

You are most welcome and thank you very much for your feedback!

@lalsy2085 2 жыл бұрын

Wow. This is something different idea 👍👌

@GardeningUpbeat 2 жыл бұрын

Glad you liked it and thank you for watching :-)

@yashodaam1355 3 ай бұрын

Sir please tell can v do tis method for fiddle leaf plant

@RexChua-dd3or 11 ай бұрын

Thanks for sharing this idea bro❤

@GardeningUpbeat 11 ай бұрын

You are most welcome and thank you for watching!