Brilliant and clear guide, thanks!

Thanks for a clear video, Our grill is playing up, have ordered a replacement thermocouple and now am confident to do the job safely thanks

Four years old but still very relevant and helpful. Thanks a lot. Kudos to the effort and thoughts.

appreciate your time to make this video, it helped me six years after your posting; cheers ! very well explained.

Have been living without the central burner on my five ring hob for ages, and kept putting off repairing it. Eventually decided to deal with it, and turned to KZfaq for help. Once I find the model number and source the Whirlpool part, I'll tackle it. Thanks for the clear instructions!

Great video. I've had this problem with my hob since new. I'm now sorting out a new thermocouple to fit myself. Thank you again! 👍

I managed to replace the thermocouple on my gas hob (of a different brand) with the help of your very clear instruction video. Thanks!

Thank you. I now feel confident to open my stove and try to repair ir. Your video is so helpful.

Great video, thanks for filming this. I have the same problem with a very similar looking Neff hob and now feel confident I can fix it. Thanks

Same problem here, Electrician quoted something astronomical. Will order the part and fix myself. Thanks for the guidance and confidence. Good clear video too btw.

Ppl , before removing the thermacouple try cleaning it with small grit sandpapper. Sometimes the buildbuid/gunk will keep it from working correctly.

Calm delivery of important information ! Thank you .

Thank you for this video, it gave me some ideas - one of my burners would only stay on if a pan was covering the problem hob. Read elsewhere that the thermocouple head must be in the flame for the burner to stay on (safety feature). Found that the burner ring and cover had a tiny bit of play and would move toward the thermocouple head by maybe 1mm, after doing this the hob stays on fine. Thanks again for the video - I know what to do if I need to change the thermocouple now.

Thanks for this easy to follow video. Removed the cover, used a toothbrush to clean up some of the grease that had built up around the thermocouple and now its working.

Superb tutorial , this has given me the confidence to tackle a similar problem on my Rangemaster cooker gas burners, thanks you

Excellent tutorial, clear and well explained and I thank you - just what I needed to know.

You really are fantastic. I've just stripped my 5-burner hob down, for just this problem. Lots of grease. Cleaned all the electrical contact faces, and all works fine. Thanks very much.

Thank you so so much. Just knowing how these things are put together (I have a Nard that basically looks identical under the coveri) allowed me to get inside and clean it up and hey presto it worked without even having to buy a new thermocouple.

Hello Tristram O, your video is very good, explains the problem you have, I also have this problem with my kitchen and I did not know how to recognize the problem, it helped me a lot to understand and what to do in this situation now I feel more confident, now I can already call the kitchen technician and order the work without fear that the technician will damage my kitchen or recommend me to buy another one because the kitchen does not work completely Thanks for your happy day tutorial

Really glad you posted this - many thanks.

Thank you! Just fixes my hob! In my case it only took to clean those elements with some degreaser - good as new! Fab! 👌

Very informative. Have the same issue, same burner, fairly new hisense stove. Im diy too, but my first experience with gas stove. Will cintact the supplier tomorrow and how it goes. Its 3 months new. Thanks.

Excellent. Thanks for the solution.

If the thermocouple has become loose and therefore might sit too far away from the flame even by a couple of mm's....the flame might continually be cutting out. Check whatevers holding it in place and make sure it holds the thermocouple close to the flame Mine works now and i didnt need a new one And p.s...you need to clean the protruding metal thermocouples tip with light sandpaper or a scotchbrite pad to remove carbon etc food deposits which will also stop it working properly

Thank you, just what i needed!

Thanks Tristram O, helped me today

Excellent. Thank you for posting.

Very good video on thermocouple replacement. Wondering if you have any video on why the burner is not igniting. only one burner is not igniting but others are fine

Great video explains everything you need to know Thankyou

A year and a bit old and this video is still extremely useful. All the steps were exactly the same for my delonghi 700mm gas hobs. Perfectly illustrated, perfectly commentated. Thanks heaps

Thanks for sharing, seems fairy easy job, off to fix daughter’s hob tomorrow.

Thanks - still useful today

Loving it!!

Thank u for the video. Im on to it tomoro morning. 👍🏼❤

Thank you. Very valuable.

I found that cleaning the thermocouple with fine sandpaper also worked ! Your video showed me what the thermocouple looks like ,I thought the spike was something to do with the spark ignition .

Amazing, thank you!

Thanks for that. Saved me hundreds of dollars🤗🤗

Had exactly the same problem on a gas refrigerator. Easy (and cheap) fix with a new thermocouple. Access was a bit more awkard though.

Thanks thats helpful got to fix mine

Thanks for this

very helpful thank you

Thanks for sharing....

Great video, just what I needed. Thanks!

Can a cooker gas hob work without a thermocouple. my AEG range cooker large burner thermocouple has gone but the cooker and parts have been discontinued. it is almost new but 12 yrs old. is there anyway i could get this burner to work. i have contacted the manufacturer and they are not interested just said no parts available oaths model.

Good job! How can i add thermo couple to a five burner cooker thay does n't have thermo couple from factory? Is it echomomical?

Good man.

what do you call the silver colour tube things that are on the cooker that carry gas? I just broke one while cleaning :(

Thanks

Hi good video In my Belling gas oven at low setting it cant stay on can you help pls

What's wrong cause this thermocouple broken? I also have the same problem and unfortunately it's hard to find thermacouple for my stove, because it has different type from what's on the market.

Hey. Where can I buy the thermocouple for a smeg cooker? If possible send a link Thanks

Try getting a head mount for your camera

Thank

Nice video. One question. The small screw on the thermocouple, is it required to have? My one is not there.

Hey great video can you send me the link where I can get a thermo couple for my smeg thanks

I need to replace the thermocouple in an upright SMEG unit but can't remove the top, even after removing all the screws from the top and back. I can remove the back edge. Any help/tips appreciated! Thanks

Where do you get the spare parts? My caps are also rusty and need replacing.

mine the middle burner is not working which i need, can i exchange from the burner that i don't use

Man what the meaning of sharing this tutorial if you never show us how to disconnect the old and connect the new

That video would have been 8 minutes shorter without all the erms 😅😂

too much taking

Technically your all breaking the Gas Safety Installation and Use Regulations if you've not proved competency to carry out this work

Can hardly hear ya mate

Ummm ummm yawn