filter modification part 2 Here is the filter that i used. www.amazon.com...
Пікірлер: 25
@dawnc4774 ай бұрын
The weather stripping is KEY!! I had my machine ran it the 1st time without the strips to see if the lint filter issue was fixed by GE since I purchased my machine in 2024...NOPE LINT EVERYWHERE!! I put on the weather strips...issue pretty much solved except for the tiny pieces that still escape so I cant wait to see the results of the merv filter....😊 thank you for posting
@OzarkLivin4 ай бұрын
Weather stripping is working great so far for me, glad it is working for you too! Thanks for the comment!
@dawnc4774 ай бұрын
@@OzarkLivin I can definitely tell you Ive done 17 loads since it was installed on March 9th...just cleaned the blue Microban ring..Holy Moly this thing LOVES to collect lint! I used a wipe to get the lint and it seems like the lint hides really well in the crevices!! None the less its a high maintenance machine but I love it ❤️❤️
@TwoCaptainsOneShip4 ай бұрын
Thanks! Let us know how it goes! I’m still using the stock filter! 😅
@OzarkLivin4 ай бұрын
@@dawnc477 Im pretty sure my Microban ring did this a lot at first but seems to not be as bad now after several loads.
@OzarkLivin4 ай бұрын
@@TwoCaptainsOneShip I will definitely keep you updated. Do you have any lint building up at all?
@HomeGuySolutions4 ай бұрын
The Blue Filter material does not look like its a True MERV 8. The material we source has a Tactile (sort of sticky) coating on the blue side. There are a lot on knockoffs on Amazon that are just colored material and not a True MERV rating, however with that being said, almost anything is better than the stock filter!
@HomeGuySolutions4 ай бұрын
Also, not sure if I mentioned it, Use the sprayer with HOT water to Clean the Blue Gasket. Just shove the nozzle in it and work your way around slow, it will remove ALL Lint up in it. Start from the Drain holes and go slow, it will be brought back to Factory New!
@wacsr.79903 ай бұрын
We’ve had ours for a couple months and no major issues with lint like with your having! I have to ask though you are aware the black foam filter attaches to gray plastic screen(which keeps it in place) Because if foam filter is just floating around instead of being properly in place that could cause your lint problem.Watching you modify lint filter is scary because if it doesn’t work or even if it does work you just voided the warranty I do wish you success though.
@OzarkLivin3 ай бұрын
Yeah mine was installed correctly the problem was lint going Over and under the filter housing that's why I did the filter mod with the weather stripping been working excellent. Thanks commenting! Glad yours is working good.
@LargeNuts2 ай бұрын
Yeah you will have the issue we all do. There is room for lint to get around the sides and it'll eventually cover your condenser and you'll see longer and longer dry times and your heat pump will die much sooner. This is a major fail from GE they should be fixing.
@anwalt6934 ай бұрын
Thank you for this video. I just installed your kit with both the three weatherstrip pieces and the blue/white filter media. I'd give myself a 10 out of 10 on the DIY scale, but it was unsure at first exactly how to proceed. I'm glad I found this video (posted just in time for me 🙂). I suggest you provide a link to this video in your kit. This video does not demonstrate the clear plastic washers, but I found them handy. Their use might not be clear to everyone. Also, the kit came with the black screen material, but it is not apparent to me if it is intended to replace part of the factory filter media body. I would appreciate a video update showing this. As the instructions mention, the new weatherstrip results in much more friction when inserting the filter body back into the combo. I think this is probably shows that weatherstrip pieces are well-sized to seal.
@OzarkLivin4 ай бұрын
Glad you like the Video! I'm not the guy that sells the kit, I'm a DIYer just trying to help out. Let me know if i can help.
@HomeGuySolutions4 ай бұрын
Thank you for your purchase. We will post an updated video, we appreciate your feedback. We had to ramp up pretty quickly to get the product out. You should have received a photo of the completed assembly in the kit. We will get an updated video out soon, or we may hire OzarkLivin to make one for us :) He went all in and did a tremendous job in getting his machine to operate better than Factory new. Its a shame GE is not resolving this issue quick enough.
@richardwieczorek66244 ай бұрын
Looks like a great way to fixed the problem. Would the air flow be slowed down by the new filter material and could that impact machine performance at all Thanks for tackling this problem for all of us 👍👏👏
@OzarkLivin4 ай бұрын
@@richardwieczorek6624 So far nothing has change as far as performance but one thing that has changed is my lint issue! Lint issue is not a problem anymore. Thanks for the comment!
@HomeGuySolutions4 ай бұрын
Thank you for the feedback will do. It’s a work in progress. That’s why we also give an 800 phone number so they can contact me directly with any questions. We’re getting there. Thank you so much and glad it’s working for you. Keep in touch we have some additional exciting products coming shortly.
@nathanbentley19394 ай бұрын
I'd really like to know why all the heat is being directed at the GE Profile specifically, when its competitors' filter designs aren't any better (and in the case of Samsung Bespoke specifically, I'd argue it's worse).
@lionintu2 ай бұрын
Who's review showed that Samsung Bespoke was worse? I heard the opposite, that it was the best of the three via several reviews. Please refer me to your source.
I think I’m about done with this thing. I have modified the filter but I think the heat pump condenser is just too full of lint and I have tried to rinse it out but I’m still getting run cycles of 3 hours. I’m so disappointed in this machine, I had high hopes, such a waste of money.
@lionintu2 ай бұрын
Wow man. Sorry to hear that.
@HomeGuySolutions2 ай бұрын
Can you elaborate more on your use? What cycle are you using? What settings are selected? More Water, More Dry, Extra High spin etc. By choosing extra options or unnecessary options, this will affect cycle time. The GE is way superior over the LG or Samsung with drying times. So many variables go into the time. How did you clean the coil? Do you still have buildup on the coil? How much lint drained out when you cleaned the coil? Did you also flush the left side of the Filter Box? Do you clean the filter after every wash or do you wait for the machine to notify you.... Did you purchase a Kit or Flushing wand from us? If so, give us a call and we will try to help you out further.