Learn How a Clutch Works - Basic Clutch Operation and Tips

No video

Learn How a Clutch Works - Basic Clutch Operation and Tips

Рет қаралды 2,578,400

Күн бұрын

Paul Cangialosi discusses basic automotive clutch operation and design and shows you some of his tips and insight.
I use Red Kap Shirts: red-kap.pxf.io/...
~~~~ Contact and Social Media ~~~~
WEBSITE ~ super661.com
EMAIL ~ support@5speeds.com
INSTAGRAM ~ / 5speeds
FACEBOOK ~ / gearboxvideo
SUPPORT THIS CHANNEL
~~~~ My Books and Store ~~~~
BUY ME COFFEE ~ www.buymeacoff...
MAIN STORE ~ www.5speeds.co...
BOOK #1 ~ amzn.to/3b7x6fT
BOOK #2 ~ amzn.to/3RUaK25
AMAZON STORE ~ a.co/ftlbr0s
disclaimer:
The content of this video is available for informational and educational purposes only. It is not intended to be a substitute for the professional advice of a mechanic who has personally inspected your vehicle, nor does it create a relationship of any kind between GearBoxVideo (Paul Cangialosi) and you. Every situation may be different, and GearBoxVideo does not make any warranties, whether express or implied, as to the accuracy, fitness, or applicability of the information or automotive parts portrayed in this video to any project and makes no guarantee of results. GearBoxVideo and any sponsors or manufacturers of parts that may appear in this video or any of the channel's content will not be liable for any damages related to personal injury, property damage or loss of any kind that may result from the use or reliance on this video and/or any automotive parts represented in this video. You are using the information and automotive parts portrayed in this video solely at your own risk.

Пікірлер: 1 400

@gtweak7 3 жыл бұрын

As a non-mechanic, I appreciate you reverse-engineer a clutch to demonstrate how it works, and what common problems can be. I particularly liked the part where you disassembled the riveted plate to see the importance of those springs. Thank you for your time and efforts.

@truckcaretv8649 Жыл бұрын

Good 👍

@rickreed 2 жыл бұрын

This is one of the most informative videos I've seen on KZfaq. Not only did you explain the basics, but you took it the next level explaining the springs and the dampening.

@detectiveareafour3030 5 жыл бұрын

I have recommended this channel to so many people. This man takes a complex set of things and breaks it down for the less experienced person can gain a real working knowledge of what’s going on in a transmission. Thank you.

@GearBoxVideo 5 жыл бұрын

Appreciate that. Thanks for watching.

@capeman10 Жыл бұрын

It only took me 8 years to find this excellent tutorial on clutch nomenclature. Let's see what I find in the next 8 years. Thank you for the information.

@nedbenfield2527 4 жыл бұрын

I learned a bunch watching this video. Am 71 and I remember shifting those gears and popping those clutches back as a teen in the sixties while making those cars bark and smokin' tires was a daily part of life. Now I know the science behind the experience. You are an excellent teacher! Enjoyed the video.

@michaeldunagan7838 4 жыл бұрын

Wow! I love all the theory explains such as harmonics relative to numbers of cylinders. An automotive semester on clutches learned in 17 minutes. Thank you.

@rayers1000 7 ай бұрын

oh my gosh, dude. so many questions ive had for YEARS (i learn everything on my own) finally answered. i dont think any videos before youre adequately got into how all these parts actually work together. You finally scratched the itch and answered the questions. thank you so much, sir. It finally makes sense to me!!!

@GearBoxVideo 7 ай бұрын

Thank you. Please subscribe to my channel

@Tomara632 4 жыл бұрын

I've wasted a lot of money on rubbish car instructors who taught me nothing about nothing. I've learnt more from you. Thanks for keeping and showing us the old Ferrari clutches. You really know your stuff. Look forward to watching more if your videos.

@GearBoxVideo 4 жыл бұрын

Thank you

@CycloneJack 7 жыл бұрын

Jesus Christ, thank you! I search for almost an hour on youtube to try to find a good explanation of how a clutch works and yours was the only video that provides an explanation that someone like me (who's not mechanically inclined) can understand. Thank you again!

@GearBoxVideo 7 жыл бұрын

Thanks.... please share the vid!

@kelvinjjemba9975 5 жыл бұрын

Thank

@95TurboSol 10 жыл бұрын

This guy knows his stuff! Great teacher too.

@GearBoxVideo 10 жыл бұрын

95TurboSol Thanks a bunch!

@uponthemesa 2 жыл бұрын

WoW, I replaced my clutch in an AX-15 3 times, OReilly swears it was that right one. It measured about 1/4 short. Its his first car and the info you provided was priceless. Sure wish you would do a video on an AX-15. Thank you so much.

@VictorDunkle 4 жыл бұрын

I thought I would never learn how this worked. Thank you for the hands on detailed approach.

@thembilehlophe7868 5 жыл бұрын

Thank you so much..I'm a marine engineer so when i went for my oral exams i couldn't explain how a pneumatic Hydraulic clutch for a schottel works, and they said i should just explain how a car clutch workss....i was even more lost and i failed my exams...come next time I'll be ready!! Thank you

@mentalasylum3969 5 жыл бұрын

I really liked the detailed description on the construction of the clutch disc itself. Thanks for a great video

@timbarker5663 4 жыл бұрын

Thank you very much! This video was incredibly helpful! I'm working on a clutch now and noticed it wasn't worn down terribly but I wasn't getting clutch release. Now I know why. People like you make the world a better place. I hope you continue with the videos. Thank you!!

@admantiom1848 4 жыл бұрын

The only video on KZfaq that explains in simple terms how a manual transmission/clutch works. Long live GrarBoxVideo👍

@ferejidris6690 4 жыл бұрын

Nice 👍 job

@ferejidris6690 4 жыл бұрын

@arkady714 3 жыл бұрын

I've been driving standard transmissions all my life and never really knew the mechanics of a clutch. Thanks for the vid.

@franciscodesouzarauto9502 3 жыл бұрын

This is a very good explanation, with very appropriate mechanical parts. Thanks a lot, very helpful.

@blakethompson8022 5 жыл бұрын

these videos are priceless. in this wasteful day and age, the knowledge gained to help understand, troubleshoot, and potentially repair your vehicle from Paul is invaluable. Thank you sir!

@TheRebuilt1 5 жыл бұрын

One of the best explanations of the drivetrain function for the novice to the experienced. Sometimes techs now how to replace parts very well but now idea how it actually works. Chapeau to you sire for taking time out of your busy day to upload.

@AMindInOverdrive 2 жыл бұрын

Pretty neat. I always wondered what the springs were for and now I know! Thanks

@anthonymurphy34 7 жыл бұрын

After adjusting the shifter linkage to factory specifications, reducing the play in the clutch pedal so that the release bearing makes firmer contact with the pressure plate diaphragm fingers to disengage the clutch disc and renewing the transmission fluid with Pennzoil Synchromesh my A833 works like a dream. So I got to thank you Paul for this fantastic tutorial because man does it feel good to fix it yourself, feels awesome.

@GearBoxVideo 7 жыл бұрын

That's what it is all about! Thank you.

@anjel1506 7 жыл бұрын

Anthony Murphy where is the speedometer sensor for a volvo 2000 v40 4.0

@anjel1506 7 жыл бұрын

GearBoxVideo where is the speedometer sensor for a volvo 2000 v40 4.0

@fgaryam 9 ай бұрын

Question. With the firmer contact of the release bearing with the diaphragm fingers, is the release bearing turning whenever the car is moving (whenever the clutch is engaged) (whenever your foot is off the clutch) and you are driving down the road. If so, how long will the release bearing last?

@robertbowers7345 4 жыл бұрын

Amazing video. Finishing up a transmission swap in my 66 mustang and seeing more in depth how each piece really works was invaluable!

@ninacroftchannel 3 ай бұрын

Dear sir: 1) I'm a woman and absolute, hopeless and helpless newbie when it comes to cars and car mechanics 2) I'm from Eastern Europe and English is my third foreign language. That being said: I understood your video perfectly and now I am a little bit better driver who FINALLY understands how the darn thing works :) THANK YOU! Who knows how many lives you saved by this video! Shout out from Eastern Europe and keep up the good work!

@GearBoxVideo 3 ай бұрын

Thank you so much!

@annitmul1614 3 ай бұрын

wish u all ze best

@ABDOUNEH Жыл бұрын

the best video ever that explains how the clutch works..thank you!

@GearBoxVideo Жыл бұрын

Glad you liked it!

@nhaminh91 7 жыл бұрын

A nerd like me can understand how clutch work by watching this, thank you so much!

@RAHULSHAH-jg1wj 4 жыл бұрын

Finally, i just got the real and full explanation of clutch. Thank you so much for this!

@cybervirgin96 4 жыл бұрын

I'm a mechanic student and I learn about clutches. I already know how it works, but I came for the tips. Great video, one of the best I've ever seen. Simple and to the point

@GearBoxVideo 4 жыл бұрын

Thank you. Please share

@cybervirgin96 4 жыл бұрын

@@GearBoxVideo Definetly will!

@fatboyhd2k 7 жыл бұрын

As a 20 year centrifugal chiller mechanic, I never understood the spring in the clutch disk, thanks to you video now I understand. I subscribe to channels only if they're useful and your video is awesome....THANKS!

@GearBoxVideo 7 жыл бұрын

Appreciate that

@MonkeyBoyDrinksVat69 4 жыл бұрын

Just the info I was looking for. It was one of those things I couldn't get my head around, what goes where and why/how. I finally get the physics of how all the parts work, thank you.

@YouKraine1 9 жыл бұрын

You are a great teacher! I just ordered your Muncie DVD book combo yesterday and after watching this I am even more excited than I already was to receive it. You have a great way of engaging the viewer and explaining things. I learned a lot.

@GearBoxVideo 9 жыл бұрын

Thanks for the great compliments and thanks for purchasing the book and DVD.

@jaimeantonio6533 3 жыл бұрын

No better video has been posted since 2014. I've been searching for a solid explanation of clutch chatter for a month and finally came across this video. Thank you!

@GearBoxVideo 3 жыл бұрын

Appreciate it

@robkatz2169 2 жыл бұрын

Wow, I have been driving manuals for 30+ years and finally understand exactly how the clutch actually works. Thank You. the way you have explained it with the visual really makes it seem a lot more easier to understand.

@vanessahom1928 4 жыл бұрын

Excellent video! Taught two of my three sons how to drive manual, this video helped them understand the mechanics and made the experience less painful for me. 😉thanks!

@bryanjohnston9879 6 жыл бұрын

This has to be one of the best automotive educational videos I've ever seen. It's clear you understand the science and physics behind clutch technology and are able to relate it to a novice like me. Great stuff. When I get done watching this I'll be looking to see if you have any automatic trans videos. Thanks GBV!

@James_Musnicki 5 жыл бұрын

I'm going on my second year of successfully driving my TKO-600 (in my 67 7.0L fastback grocery getter) after watching your video on how to take it apart, service it, and put it back together. I've always wondered what purpose those springs served in the clutch disc. And now I know! Thank you for this video!

@johnnyfingersandthumbs9809 4 жыл бұрын

Never to old the finer details as to what really goes on out of view. Thanks a million.

@richmac918 3 жыл бұрын

Great video Paul. I do a lot of my own car repair work but transmissions are something that I've never had the opportunity to work on. Even though I had a basic understanding of how a clutch works I have a much better understanding of it now because of your video.

@GearBoxVideo 3 жыл бұрын

Thank you

@GearBoxVideo 7 жыл бұрын

I just eliminated yet another comment comparing a squeak my chair makes to flatulence. While we all enjoy a little sophomoric humor on occasion, this is an educational channel, and I prefer to keep the comments more Q & A focused. If you are looking for something more bathroom-humor oriented, perhaps Pewdiepie? Thanks for your cooperation.

@steele174 7 жыл бұрын

GearBoxVideo great video explaining things in detail people can really learn from this

@ramprasadaryal7166 7 жыл бұрын

GearBoxVideo 9

@djangoando2248 6 жыл бұрын

Hi, i'm from Argentina and just want to say THANKS, your explanations are so detail that makes me understand much better how it work. The knowledge is something precious and you give us so much, thanks (sorry for my english i need more practice)

@ApartmentKing66 6 жыл бұрын

No problem, Django...your command of English is actually pretty good considering it's not your primary language...no apology necessary.

@margaritaanarodriguezsanch7317 5 жыл бұрын

+wannawatchu66 kkekjiei

@gwynt909 8 ай бұрын

I learnt a lot about clutches a few years ago. I drove a 1983 daihatsu charade and could not get a daihatsu clutch set for love of money so had to contend with a LUK clutch. Within a year the clutch collapsed catastrophically. After replacing the clutch 3 times in 3 years i found a daihatsu clutch. It turned out that the LUK thrust bearing was not the right size and caused too much pressure on the plate and it would cause the diaphragm to collapse. The daihatsu clutch lasted 10 years!!!!! Thank you for the reminder of how they work.

@GearBoxVideo 8 ай бұрын

Often overlooked on replacement clutches is finger height. So what happened is the diaphragm was being over-centered causing early failure. Since you have no release bearing travel adjustment

@Luapsalta2 7 жыл бұрын

One of the best basic videos I have come across. I was looking for a video to show my grandson how a clutch works so I can teach him how to drive a standard transmission. when I was a kid (100 years ag) everybody learned on a standard. I think it helps to see how a clutch operates in order to learn how to use it.

@darthnihilus511 4 жыл бұрын

God I love listening to this guy, makes me feel like I'm home!

@mosesgreat6457 7 жыл бұрын

Very nicely explained!! Got a clear picture in my head after looking at the video ! You really know what you are talking about!

@TrongNguyen-uu7be Жыл бұрын

I randomly picked this video and realized that it was amazing. Thank u so much, sir!!

@curtbrowning1390 6 жыл бұрын

Great instruction Paul, you saved me time and money. I did a clutch replacement years ago on my back in the garage WITHOUT a spline indexing tool. THAT took a while with 90 pounds of Muncie layin on my chest. Fast fwd to today, I had forgotten some of the critical steps but now I'm up to date with your help.

@boldorboy08 5 жыл бұрын

Very informative. I wasn’t aware that the pilot bushing could grab the input shaft that way. Cheers.

@GearBoxVideo 4 жыл бұрын

We only use oil impregnated bushings. Never a roller

@tonymartin6508 2 жыл бұрын

@@GearBoxVideo What is acceptable clearance on the diameter of pilot shaft to bushing ID? Is .010" too much (for an oil lite bushing)?

@alcarpuk 5 жыл бұрын

10/10 for information. Really liked the info on the lightweight flywheel! Keep it up

@nikhilmudholkar2769 7 жыл бұрын

Thanks a lot. None of the other youtube videos and animation actually explain how a clutch works. Your video was seriously a great help

@GearBoxVideo 7 жыл бұрын

Thanks for watching.

@jackmack1061 3 жыл бұрын

My son is now learning to drive . I said he should learn how the clutch works than I lucked into this channel. Excellent vid. thanks.

@MarioDallaRiva 8 жыл бұрын

Thanks Paul. Fantastic explanation especially the clutch hub dissection. I'd never seen that. Bravissimo!

@GearBoxVideo 8 жыл бұрын

+Mario Dalla Riva Thanks for watching!

@EgyptianSurgeons 7 жыл бұрын

What a great video indeed. Thanks

@GearBoxVideo 7 жыл бұрын

Thank you

@kurtnarinesigh4093 7 жыл бұрын

Egyptian Surgeons

@carloscortez6135 7 жыл бұрын

Egyptian Surgeons chistes

@ronnyvansanten 7 жыл бұрын

good explanation

@1967lathrop 4 жыл бұрын

To think we had a whole 2weeks in auto school back in the 80s and you explain it in a few minutes. Needles to say I just started to work in auto shops and learned much more faster. Nice content.

@GearBoxVideo 4 жыл бұрын

Keep watching. More good stuff coming

@yosoydpfknr2855 4 жыл бұрын

This gentleman is an expert, I can stay all day long listening what's he's explaining.

@GearBoxVideo 4 жыл бұрын

Thank you

@matheomatheo3653 5 жыл бұрын

Very descriptive explanation. Thanks for sharing God bless you.

@nizartiger741 5 жыл бұрын

Thank you very much sir.for the good explanation and for good illustrating the ideas for each part of the clutch assembly. Accept my regards from Iraq.

@unclequack5445 8 жыл бұрын

No kidding, He really makes it easy for even those that have never done any automotive work. Good one Paul.

@BigEightiesNewWave 2 жыл бұрын

8:35 finally ! Someone explains it. This video is a goldmine of information. Gold Standard must-watch video.

@_i-kr6eg 5 жыл бұрын

Love the Rammstein intro

@PrimeministerAus 7 жыл бұрын

The springs always had me confused on the plate itself, no longer! Cheers!

@aaronwilliams6165 7 жыл бұрын

This is the best video I have found on KZfaq in the last three months that explains the actual workings of the transmission and clutch flywheel function and how things can occur do to user input that will cause issues with your vehicle operating they way we all want. Thank you

@GearBoxVideo 7 жыл бұрын

Thank you

@bbeck104 3 жыл бұрын

Very informative and very demonstrative. Many people looking for this kind of information understand better when they're being shown how it works versus being told how it's supposedly works. Thanks for the great video

@jonathanmorand8893 5 жыл бұрын

oooooooooh that song at the beginning shows you have good taste for music.

@kurts7268 3 жыл бұрын

Rammstein 🤟🏻

@vdog4799 3 жыл бұрын

@@kurts7268 is that who that is? Awsome! If you tell me what song you can save me a ton of video searching😁

@bringer-of-change 2 жыл бұрын

I liked the pinch harmonic over the electronic stuff. Like techno metal.

@dannychuqui4797 8 жыл бұрын

Hi, thanks for sharing your videos....Is good to know someone like you explain with details..... and we can understand more clear..... thanks.... Question...... when a transmission is not working well.....what's the part's name.....I forgot....thank... u...

@omamini3350 5 жыл бұрын

Excelent

@VoodooDon 8 жыл бұрын

Found you through ETCG, and the T5 rebuild You are the man! I have understood the basics for a while but your the first person i've seen who can explain a total teardown and rebuild of a manual and it all make sense and i'm still awake when its done.

@GearBoxVideo 8 жыл бұрын

+Don Shelnutt Nice to know!

@T07N 2 ай бұрын

Wow all this done without a single animation. Awesome work.

@AndrewHeinrich1612 5 жыл бұрын

Love your channel, and of course the Rammstein intro music!

@artemiasalina1860 8 жыл бұрын

What a great video! Much more than I was expecting to learn, and those old Ferrari components were really cool to see!

@GearBoxVideo 8 жыл бұрын

+ArtemiaSalina Thanks a bunch for watching.

@glennwmurphy1 5 жыл бұрын

BEEN WORKING ON CARS MY WHOLE LIFE, LEARNED FROM BOOKS. LOTS OF WHAT I READ WAS HARD TO UNDERSTAND FROM DRAWINGS. YOU ARE GIVING ME MY "PHD" IN MECHANICS, FOR WHICH I AM REALLY GRATEFUL. I HAVE ALWAYS DONE ALL THE WORK ON MY FAMILY'S CARS BECAUSE I OWNED AND RAN A FOREIGN CAR SHOP IN THE EARLY EIGHTIES. MY PARTNER AND I GREW-UP ON SPORTS CARS IN CA., AND WERE AMAZED AT HOW SHOPS RIPPED-OFF PEOPLE, ESPECIALLY WOMEN, WHO ARE CONCERNED ABOUT THE SAFETY OF THEIR VEHICLES ABOVE ALL ELSE, BECAUSE THEY HAUL KIDS-THEIR OWN AND THOSE OF FRIENDS. WE DID SO WELL JUST RUNNING AN HONEST SHOP, IT WAS RIDICULOUS.

@anthonyclayton3219 Жыл бұрын

I always wandered what the springs were for. Thank you for explaining it all. Thank you!

@kittypigeonclueless5566 3 жыл бұрын

"...Hope you like it," Paul says. "Of course we're gunna like it!" I'd rather watch Paul talk about gears and clutches and rear ends than the Superbowl.

@hugodelafontaine9404 5 жыл бұрын

Thank you.. Now i understand much better !!!

@balloney2175 3 жыл бұрын

At 66, I am curious of enrolling on Auto-repair course because of this video. It inspired me. Thanks!

@GearBoxVideo 3 жыл бұрын

Never to late

@gekorec 3 жыл бұрын

Thank you. Been around cars most of my life. I picked up a few things.

@265chevy 10 жыл бұрын

very cool video i learned alot

@GearBoxVideo 10 жыл бұрын

thank you.

@lizzyfan1986 7 жыл бұрын

Well explained, thanks so much!

@fhowland 6 жыл бұрын

One of the best vids on YT explaining clutches. I consider myself pretty knowledgeable about cars and I still learned new stuff. Thanks!

@MANU-hp2vz 2 жыл бұрын

This is so amazing.. didn't have a single clue about all this stuff up until this moment.

@RanasGarden 5 ай бұрын

Excellent explanation 😊!

@truegrower658 7 ай бұрын

Im in school and this quarter is transmissions 😢

@VineV-Dutch 4 ай бұрын

No matter how much time it takes; figure it out, get your brain wrapped around it. There's money to be made in that business and if you get it; you'll enjoy it. Do the (home) work, invest the time in the books. It'll be worth it for sure!

@fixumnet 4 жыл бұрын

i watched 1000 videos that how clutch work. and this is my last one. ended i understand clearly now. thanks so much.

@VolksTrieb 3 жыл бұрын

Just found your vids. Just rebuilding my VW transmission. Had a defective diagfragm/membrane spring all way long for 60.000km. Always wondered why reverse was always chewing a bit. Now I know a lot more! Keep up the good work and videos ;) Hope to learn even more in the future!

@andrewpaterson860 7 жыл бұрын

Rammstein yes

@PompeyMatt17 Жыл бұрын

probably the first time I've understood how a clutch plate and springs work !... thank you !!

@GearBoxVideo Жыл бұрын

Glad it helped!

@leewaken5059 6 жыл бұрын

That was an excellent description of the workings of a clutch. For whatever reason I have always been dumbfounded about the springs on the clutch plate. I knew they were there to dampen clutch action but until I saw it dismanteled without the springs, I just could not grasp how it all worked. Very simple. Thank you very much for the time you spent in your explanation.

@GearBoxVideo 6 жыл бұрын

Thanks for watching!

@thomasdingo5191 Жыл бұрын

As an old shade tree mechanic I,ve put a lot of clutches in but I was never sure how the springss on the clutch plate worked. Thanks now I understand.

@danssv8 Жыл бұрын

You're the man , very well explanation on the clutch plate springs and clutch hub assembly all revited together. Loose springs and worn hub could result in shudder as the plate runs out of circle when the clutch is released. Very informative and very well done for showing others how it actually works. Great job sir.

@franklane6557 4 жыл бұрын

Thanks very much for taking the time to record and upload the video.It helps a lot when you can see how all the parts work together in sync rather than just being told.Now all the “can’t find it so grind it” drivers ,reverse gear especially noise I have heard down through the years now makes me cringe even more that I am a little more enlightened.

@cosmicchatter1085 6 жыл бұрын

It's so beautiful when it's brand new and clean like that. Great video thank you

@Tagukon 2 жыл бұрын

Great, you shed more light on how Scotty Kilmer's video on how to change the clutch: which side goes to the flywheel and which side goes toward the gearbox; the importance of the bearing; and the alignment of the transmission shaft to the clutch. Thank you sir.

@GearBoxVideo 2 жыл бұрын

Who is this Scotty person? I'm not aware of that video

@dontrump4697 4 жыл бұрын

I remember helping my Dad pull the clutch out of his 1950's Ford Prefect to change the clutch plate. Looks very familiar. I would say as far as clutches go not much has changed since then!

@MarkTisland68 Жыл бұрын

That was very informative. I know something about how a clutch works now, whereas I was completely clueless before watching your video. Thank you.

@debeerpaul 5 жыл бұрын

WOW awesome explanation. I thought my new clutch was too thick when I saw the gap between pp and fw. Quite relieved now.

@avinashthakur794 7 жыл бұрын

I saw 30+ videos for clearing my doubt that how clutch plate disengaged ..but doubt not clear..but this video clear my all doubt on transmission...thanku sir

@connorwesterfield8393 5 жыл бұрын

This was extremely enlightening, even after having done clutch changes and lightweight flywheel swaps, it still really wasnt that clear to me, thank you

@antonvz19 7 ай бұрын

I have an issue with my car having rattles when I apply clutch control. This is after the gearbox was replaced. I needed to understand what the possible causes were, bewore I take it back to the workshop and allege that the gearbox is faulty. This video was so helpful and easy to understand. I have almost now mechanical understanding, yet I found this video very informative!!

@sedadmin8275 3 жыл бұрын

Absolutely the *best* clutch tutorial on KZfaq. Thanks !

@GearBoxVideo 3 жыл бұрын

Wow, thanks!

@KiaSorento-tu5op 7 жыл бұрын

Everything I ever wanted to know about clutches. Really makes you appreciate how the system works

@GearBoxVideo 7 жыл бұрын

Glad the video helped.

@Maximilian0011 3 жыл бұрын

Yes, this is an awesome presentation with a strong voice of a guy that knows what he is talking about, its a pleasure to listen to. In my e39 540i I think my Clutch Slave Cylinder gone bad since it does NOT

@skaargan 7 жыл бұрын

the most complete clutch mechanism explaination I ever watch.

@GearBoxVideo 7 жыл бұрын

Thank you!

@cleaterose5914 7 жыл бұрын

The best video on the workings of a clutch! As a DIYer, I never got a chance drill out the rivets in a clutch plate since I would forfeit my core deposit. I understood that the coil springs dampened the action of the clutch but I never understood how until now.

@GearBoxVideo 7 жыл бұрын

Thanks