🤯🤯 wow! NICE DUNK🏀🏀😊

I really appreciate the real world approach you guys took on this. You're right , most how to's do go from instruction then fade away then next scene -part is installed with no explanation as to the full process.

I've been pick up on the split plug instead of pushing down. This is the video we need Matt. Nice dunk

Thats bad ass that u can dunk a ball. I wish I could, even though I was able to touch the rim when I was in my 20's at 5'6". Excellent video on the dash.

Oh I've had lots of experience with removing the gauge cluster. I remember going back up with the steering column you have to be very careful and make sure any hot wire does not get pinched up against metal. Good thing I caught it. Almost burned down my car. But it is a learning process. Take your time and be very careful.

I wish gear head 704 can come over and help me out

Thanks a lot for doing this kind of videos right now im full restoring my foxbody this Is the exactly video i was looking for to do the dashboard on my foxbody... Greetings from México

Awesome details, I was there on Monday and with Matt’s help I’m pretty sure this is where we are at with my a/c. Have a blockage of some sort at the evaporator, so it looks like I have a dash pull in my future also. I opened the system and will try to flush it 1st but I bet that won’t work. This is necessary here in the south if your going to drive this car around with any regularity during the summer. Matt said this was going to be a good detail vid, and he was right, thx 😊 y’all.

I've said it before, and I'll say it again. That Matt at Fox Mustang Restoration knows something. Understatement of the year. He knows a lot! ;-) Oh, and I just saw at the end of the video that you Turned the big "40" on Tuesday. Happy Birthday buddy!!! 🎈🎈🎈🎈 Also nice dunk! I am 6'2" and I used to be able to grab the rim and pop it but never dunk. Maybe I could have dunked a ping pong ball. LOL. I too am too old now and a "few" pounds heavier.

Not all hero's wear capes 👏

You don't have time to be dunking no basketball Bro. Lol😆 Get that Stang together. Great tips from that guy and good tip to get that heater core while you. Got the dash out 💪 Stang Life 🐎

Awesome video. Big hands make this a hard task. Knowing exactly how the different components disconnect makes the job much easier. Thanks for the info.

Very well detailed.

Great video brother, pulling the dash is the worst

Liked the electrical connector remover tool got to get one for my collection looks like you still have game

Thanks , very helpful. I used to do this stuff all the time

Wow - a lot of good info packed in there. I did the shortcut dash pull once when I changed a heater core in my last foxbody. Luckily nothing broke!

HAPPY BIRTHDAY !

Looks like it’s complicated ! I would hate to take apart a S550

The dashboard is one of my least favorite things to work on!! ;-)

I guess Matt has pulled a dash or two in his day lol. Great video! Great info!

Happy birthday Matt

His knowledge is priceless!! Happy birthday!!

Pulling the dash, what a wonderful thing to do! Lol

Awesome mang🤘

Great vid and I need that electronic clip removal tool. I was wondering after 17 minutes of talking if there was going to be some doing :). Interested in the process to restore the plastics and foam. Can’t wait.

Matt---tell Matt Thank You SO Much for going thru the Detailed "How To Process" that so many others skip. They forget their *Roots* like TWO Others I won't mention. Did the 10.5 show up yet for Matt on the SSP?-----704 & Funky the Real Fox Channels.

Wow great how to video

Happy Birthday Matt... what a pain trying to squeeze my hands behind the gauge cluster to unhook everything. Not a fun project. Nice dunk! Playing bball & working on the foxbody, what a day! Your making me jealous lol

You sound like Owen Wilson, Great video tho!

AWSOME tips & tricks I owned 90gt great see how to this because there's a lot to doing thanks 👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍

I may or may not have just put in a shifter the way he said not to 🤣🤣. Luckily the console didn’t crack. The dashboard on a foxbody is a beast to take out. I avoid it at all costs lol

Where is the tape on a GoPro? 😂 I didn’t know the split clips released like that, I guess that is why I have broke some. Thanks for the info Matt and Matt

Here again champ 👊🏾

Tell matt great video and happy belated birthday im turning 55 next month my self wooowee..i use to dunk lol great job..

Happy belated bday man! And I’d hope you could still dunk.... your like 7 ft tall. Lol good info on the dash tips. I honestly didn’t know about the split plug ends you push down. Good to know!

When will part 2 be available?

Played basketball in high school too. I can’t dunk it now. Great video though.

Hey, nice Dragon Ball shirt.

Must be why my tabs at 7:31 were missing on my center console. Some idiot before me didn't take the time to remove it correctly. 🙄 I could have used that wire disconnect tool when I dropped my dash...them things are a P.I.T.A. to remove. Thanks for sharing another informative video, love these DYI's 👍 Happy Birthday 🎉 Was that an 8 ft rim 🤔😂😂

I think the rim was 9’6 ha ha

Happy Birthday again you old fart!!!! Welcome to the 40 club! 😂😂😂 have fun with the dash... Just did Christine's!👍👊😁

Well i wish i watched this before i broke a few connectors lol il just black tape them for a secure commection

The push and pull tab info is gold to a fox owner What is the name of that tool and where can i purchase it from

I halfway pulled my dash out and then thought to myself...”oh shit...what did I do!?!?!”

Loved It!

Lol ...what was that a 9 foot goal?

Spread the legs on the dunk like MJ 😳😂. I had to like after that.

People cry and cry about doing the heater core and pulling the dash in these cars and how you can cut this and that and hurry this and hurry that, if you have one of these cars and you can't take the time to do a heater core correctly just sell it to someone that really appreciates it,take your time, do it right, replace things behind there, re wrap the wiring, clean everything, do it right. I did mine and i even sourced a oem heater core,a task that took me 4 months to find one but that cheap ass aluminum crap just wasn't gonna cut it,thing's not even the right size, ha ha ha, my Mustangs are not even show cars,they show their age but i sure enjoy working on them!!

Where can I buy that terminal removal tool lol

I have a 86 manual gt t-top and I need a dash, anyone has one for sale? I’m in Dallas.

Dover on foxcastmedia I think he changed a heat core I think it was less then a half hour!! Man ur boy Kevin builds I know he is young he wants to run a GT40 intake with a 1 inch spacer he cut his hood brace out cause he said his friends hood hit the intake there's no way it would hit then I never seen nobody put a brand new set of head lights in and not clean where the old headlights were but like I told him he isn't going to listen to what people tell him he is going to do what he wants!! So I unsubscribed from his channel I have a Trick Flow intake 1 inch spacer stock hood fine ! Now he's trying to find a roller I think he needs to find a job first people are sending him money & part's to help with what Matt gave him for the Vert ! But I don't know he is just a kid maybe when he gets a lil older in starts to understand u know people have other ways they do stuff then Matt does and it works for them I know Matt is a great mechanic but people do stuff differently other then him!! But good luck with the dashboard buddy!!

Too much talking