My problem with pawn shops closest to me, is the majority of time they charge more than brand new

I've had the 1/4 & 3/8" 90 tooth for about 2 years and they have been good ratchets...definitely a great quality for the price, especially if you got a deal on them....

I have the 3/8th bought it after watching Project Farm’s Ratchet showdown, gotta say it’s a really good ratchet and I love how little back drag they have.

I'm an aircraft mechanic, the 1/4" 90tooth gearwrench is one of my go to rachets

I've got the set, been happy with them. The 1/4" has become one of my favorite. I've just found that I hardly ever reach for a standard length ratchet wrench anymore. I always end up using the long pattern, extra long or the stubby.

I have the 84 ratchet set and it's been a great set. I also have the 120 which are excellent but they have a larger head. Gearwrench is an excellent brand.

Apex tool company makes all them ratchets. I have quite a few gearwrench ratchets and I love them, never had any issues with them, thanks for your reviews😊

There was a pawn shop in my town that had "We buy broken gold" on the sign. Someone changed it to "We buy broken dreams". It was gone by lunchtime, should have snapped that pic.

Hello again Catus Maximus and Tiny Thank you for another Great Video 👍

Anvil wobble can be minimized with brass shim stock. Disassemble the ratchet, clean thoroughly, apply a thin layer of mineral oil in the cavity, add a piece of .002" shim cut to fit securely, lube as normal, & re-assemble. I use 3-in-One oil. If you experiment with shim thicknesses you can customize how tight/loose you want the anvil. If I remember correctly, the pawl has an up side that you need to make sure is oriented right when re-assembling. I've shimmed all my GW ratchets including my locking flex. Direct quote from Apex Tool Group tech support: "As for maintenance there really isn’t any. However, you can use light coat of grease on the gears, or if you prefer oil, you can use air tool oil, mineral oil even 30w non-detergent oil to lubricant occasionally if you like."

One of my favorites, my son uses these all the time 3/8 drive. They work well.

Catus Maximus thanks for giving your opinion on the gearwrench ratchets I've been debating on buying all gearwrench ratchets and getting rid of my other name brands because I've been hearing a lot of good things on KZfaq from other channels as well talking about gearwrench ratchets.😀👍👍

I like my 3/8, the head was a bit wider than I imagined it to be, but I really like the ratchet. The handle is kinda funky, but I got it in a set with a bunch of other stuff. I know it's a small thing, but I really appreciate the "On" and "Off" for the selector switch. I have a ton of different brand ratchets with different On and Off positions, and im always fiddling with them trying to figure out which direction is which My 3/8 came with 2 impact screwdrivers, a 8 piece "Bolt Biter" extractor socket set, and two of their Pitbull tongue and groove pliers for I think $70. Everywhere I've seen that ratchet it usually retails for $40-$50 alone, so I thought it was a good deal

I have a couple of gearwrench ratchets that are 42 and 45 teeth that came with the basic set I bought at a parts store and I like them a lot. The 1/4 inch is my favorite and I'll grab it over the 3/8 inch every time.

I have the 3/8" Gearwrench BIG CAT 🐈.. Got it in a kit for an awesome price... They're good 👍

I have looked at hand tools at some pawn shops around my area. I never find the deals you do, Cat. I have gotten along fine with my 72-tooth ratchets. The Tekton comfort grip version I bought is a 90 tooth, but I don’t use it much.

Those are very good ratchets! I have a few gearwrench ratchet/socket sets and never have issues. For store bought the quality is well above par 👍

As a tech I've been using that exact 3\8 ratchet daily and beat the hell out of it.Oil, break ckeaner, gas, throttle body cleaner water If you really bang some thing to tear part of the grip it doesn't spread and it's pretty dang hard to tear the grip. My matco comfort grip, grip doesn't hold up as long.

I've got a 3/8 84 tooth 11 inch. That baby is smooth. I've got a 120 xp 17 inch flex head. Very nice.

Don’t forget the 100 tooth ratchets they market as Duralast or in quick release as the black Husky line

I was under the impression that Gearwrench tools were made by Apex Tool Group, along with SATA, Halfords Advanced (UK), and a bunch of other brands, hence the similarities. I have a couple of those GW ratchets with the older red and black handles, and they've held up well. The handles are so similar to Snap-On comfort grips, though, that I wouldn't be surprised if GW got a cease-and-desist from Snappy, leading to the change of colour scheme.

Do you notice your GW ratchets have a wobble? Especially with their sockets? They say that’s not a bug, but a feature, but idk about that

I think the Gearwrench 90 tooth won Project Farm's ratchet shootout.

The 84 tooth was replaced by 90 tooth. I believe the 72 tooth was replaced by the 84 tooth before that. Hence the different color as well when they changed design.

✌️

Sorry, I loathe over molded products. Cool videos, Thanks!

I bought a 1/2 90t set from Amazon. The rachet has a completely different anvil, then my other 90t rachet. Very sloppy, you can spin the c clip with your finger. SMH

Cut the Gearwrench open, to show your viewers how far thw handle extends

What a chunky head design, they could of done a lot better lol . about best they done was early production 84T compatible with matco 90 tooth rebuild kits . Gearwrench these days is mainly not a good buy ...

i wouldnt shop at a pawn because i have a conscience and know how those tools got there 🤷🏻‍♀️

Ubiquitous = Yooobickwadis not umbiquitous. Just trying to help.