My mother language is not English, but I could understand every word. You have a very clear pronunciation. A good teacher!

I have installed this same set-up in my basement shop based on this video. I have 4 drops and about 40' of PVC pipe runs. I encountered two issue that have been easily corrected. First, without glueing or securing the PVC vertical connections they can apart, I ended up using PVC glue to keep the vertical drop connections together. Second, the dust bag that comes with the dust right unit clogged with dust and greatly reduced the suction power. Even clean the bag with compressed air would only help for a few days then it would clog up again. I upgraded the bag to the canister filter and have been running it for two weeks with no issues. For a home DIY woodworker this is a great solution.

It's hard to believe that someone who build up a perfect dust collection system like that at own home garage!! It's a beautiful job and so clean and neat!! I've not seen before something like this!! Thank you very much for sharing that with us. You're amazing and innovated person man.

You have some great ideas and have illustrated them all very well.I appreciate all the time you must have spent edging and producing this video along with all the work that is in your link. Great job!

Thanks for sharing. Keep the shop videos coming!

I've been researching a good set of tutorials or walkthrough for dust collection and pipe work, specifically with the Dust Right Wall Mount. By far the best and most informative video on this topic. Can't thank you enough. Now I gotta go and by some pipes and fittings ;-)

Good stuff as usual, I am researching dust collection for my home garage wood working shop.

I too, would like more information on grounding this system.I am almost set on buying all the appropriate plumbing and fittings. Having been on several wood shop/dust collection fires, this info would be SOOOO helpful. Thanks!!

Tha is a really clean workshop you have there mate! Good job!

Absolutely awesome and informative video. excellent job. I learned a lot from this.

Great vid - lots of good info regarding dust collection - thanks for making it. I have been considering adding a system to my garage shop, and the info on using the schd 40 pvc helps a lot. Had no idea you were into woodworking - learn something new everyday!

Very nice explanation. Thank you for sharing.

Great introduction to setup, nice video production ... Time to get mine hooked up! Cheers...

You just saved me hours and hours of trying to find the right connections between flex piping and PVC. Thanks!

I'm currently "mentally designing" a similar system for my garage/workshop and plan to use many of your ideas. I liked your use of available components. A few commenters questioned the PVC size chosen. My rationale is to use a smaller size plumbing, based on the knowledge I'll only be using only ONE power tool at any given time. Also, my "workshop" is substantially smaller, so I see no real need for the larger setup in mine. I also liked the use of "shutoff's" at each port. I loved the homemade mounting brackets. GREAT, simple design, that looks good and functions well. In regard to the static build up issue, I understand the principle, but I also agree there seems to be no verifiable instance(s) of an explosion in a garage workshop. Still, I may opt to incorporate some sort of grounding system in mine to completely eliminate any chance of static buildup. Thankfully, I have access to a significant amount of FREE copper wire for this. I see this as carrying a handgun and hopefully never needing it, but it's worth more than it's weight in gold if/when you do. ELIMINATE that possibility as I see it... ESPECIALLY since the anti-static components are free. Why NOT do it, right? Thanks for a good video. :-)

Great presentation!

Excellent information! Thanks!

Perfect and complete explanation btw. New subs!

great video , very informative

Very informative video! Thank you! I subscribed to your channel and to your website.

excellent work!!

I love ur garage door opener system!!! Never saw one in a house like that! I hate my overhear motor being a major eye sore.

Clean job !

Great vid ......keep up the good work......

Thank you so much. This was a lot of good information. I make custom hand forged knives and my biggest problem is trying to keep my shop clean from all the dust that collects in my little shop. I have a collection system that just isn't put together correctly. This video will help a lot. By the way I read a lot of these responses and some of you folks need to lighten up a bit. You don't like something? Don;'t be so damned critical. Why don't you guys put something better out there? Because you can't!

For static electricity i would run a 14 awg bare wire with in the pies and connect it to the outlets ground on few ends. That would provide sufficient grounding throughout the system.

Sweet video ! Subscribed !

Ah, finally - some thorough and useful information on how to create a dust collection system. I have a new 2-car garage which will become my shop and I have been looking for a while for this type of information. Thank you - very helpful. Will the local Harbor Freight store sell these types of fittings and connections.

Thank you for sharing.... I like it!

if you get the thinner walled white or green pipe, you can use a heat gun to expand or contract the PVC to the size fitting you need.

by the way, very informative and clearly depicted video.

Very good video

Hi great video do you mind showing more Info on the Wen AFS install to the ceiling?

Nice setup! I just got one of the Rockler vacuums over the weekend and am now researching systems. I like the system you used to hold the pipes also. I’m probably going to vent to the outside since that is better than using a bag. Good video and thanks for the information

Nice video thanks for sharing

good teacher thank you

Nice video and thanks for sharing your installation insights. I can use a lot of these ideas in my own 2 car garage set up. However, you didn’t talk about the tank looking gizmo mounted on the wall near the dust right vac. Is that a filter of some sort?

Now that you've had it for a year, how do you like you system? Do the blast gates work reliably without sawdust jamming up in them? Is your first stage trash can doing as good as you hoped? Is the wall unit still holding up? Do you wish you had done anything differently than what is in the video? I'm looking at doing a system similar to yours and would like to learn from your experiences.

Look for DWV pvc, it's a very thin wall and will hit over most of your dust collection accessories. there are also connectors called 'street' connectors, that have one end that goes on the outside of the pipe and the other will fit inside the pipe. that will help you fit many accessories that the DWV pipe doesn't fit on it's own.

thanx for your time ,great system, would the suction be strong with 2 hp? cheers

Might want to put a screen in that pan under the belt grinder in case you drop something your working on. That vacuum will suck it right up.

Awesome setup. Thanks for sharing. I've been doing research for the better part of a month and the equipment you've chosen are the exact same that I feel offer the best bang for my bucks. I'm not sure if I should go with the Powertech, Shop Fox, or spend the little extra on the Rockler though. A couple questions; do you think that a standard furnace filter could be cut to use as a replacement for the outer filter on the Wen air cleaner? And could you PLEASE do a video on the Vacumaid pro? There aren't any thorough reviews. I really want to get one, but I could get 2 top of the line shop vacs for the $315. Having it off the floor and 30 or 50ft of vacuum hose would be sweet, but is it worth it? Does it provide the same suction as a regular vacuum?

I noticed the Husky toolbox in the background. How happy are you with it? Any input on it would be great?

great video, about the pipe by the belt sander. if you put a 45 fitting on the end and that should allow the hose to stay on better, and sticking the hose on should be easier also.

I really like this video. However, how do you cope with static electricity build up?

you have my dream workshop :(

What about using 2 screws 180* from each other and and just cut slots in the receiving ends

Love the design, but why did you use 4" pvc versus something smaller? I am going to build my own, and am curious about the larger diameter? Thanks!

in Canada i can not do wood work In winter, weather restriction .But you must be in USA and no snow area...Good work.

Hi John, This has been a great video for me! I want to use the schedule 40 PVC from home depot...but need help to select the accessories to help me with fittings...like you said, the PVC openings are too large. Is the woodstock 4" splice going to work for me to fit the PVC opening, then reduce it to fit the 4" tubing I already own? Need some help and appreciate any y ou can offer! I'm on the 3rd watch of your video! I have a delta 1.5hp dust collector and 3 main power tools to connect....miter saw, table saw and router...then a few sanders and such

Nice tips, but here in 2022 I used SDR 35 drain pipe for my 6" main and then split into 2 - 4" sub runs in the shop for my Grizzy G0944 (1-micron canister w/Super Dust Deputy separator in front). Much cheaper than SCH 40 pipe & fittings and the typical connectors available from manufacturers like PowerTec, HQRP, etc. fit perfectly without need for the special ones. Another benefit of SDR 35 is it is even lighter and easier to cut than SCH 40. The cost of SCH 40 in 2022 is crazy expensive... a 10' foot section of 6" will run $100+, whereas SDR 35 runs about $60. The downside... it is blue/green and not white like the fittings. ;)

I just stumbled across this video the other day, and this is exactly what I want to do in my garage. Tried to click on the link but it comes up with the HTTP 404 error, link has been removed. I would like to see the list of parts and pieces. Thanks!

Go get a tube of Wedi sealant to stick that lid down. It seals, adheres and stays flexible. Very good product

where can you buy the 4" dust hose lid I saw you using on the trash can?

about the dustcollector under the beltsander : if you build a drawer under the machine and mount the funnel intoo that you have a system that you can slide under the table when not needed

Do you use your shop at all? It is very clean.

I like what you did with the pipe..... my question is would it work any better (have better suction) if I were to use 2 inch pipe.

good job sir

Shoe goo! Will work! Most adhesives won't stick to polyethylene but shoe goo should do the job. It's flexible too!

VERY helpful. Thank you.

You put a lot of effort and work into the video and your system. I have the same Rockler vac and it does not generate enough suction to effectively run the pipe system you have - especially with the 90 degree bends you have. In fact it loses strength on a single hose and an Oneda cyclone in between

I know some other people have commented on this, but do you think you could add a note to your description that it would be best to ground the piping so that static buildup can be discharged? PVC or ABS dust evacuation systems are notorious for electrical buildup, and for people that use electronically controlled (like the festool variable speed tools) power tools, the shock can damage the tools

Whats your take on using a cyclone on the dust collection system? Like you I don't currently use one and instead use a similar setup with a two hoses on a fiber trash container.

Thanks

Just a thought use more of the gasket material on the top side too?

Like video. One question: Does the pipe need to be sch 40 and if so why?

My suggestion for the connecting of the lids on the trash end of the system: coat the other side of the foam tape you used on the underside of the lid, but coat it with contact cement, let dry, also coat the lid it will be installed on, then the two lids will be connected properly and sealed .

Nice video GB. I have been running a system very similar to yours for several years now, except I used the thin walled PVC and it has worked very and can be easily re-routed if necessary..... I have seen several comments about Static Electricity off the PVC causing dust fires. If anyone out there has any links or documented information on Shop Fires caused by Sawdust and Static Electricity could you post them please.

I don't know what kind of reducers I need to go from a 4" dust collector, to a portable Bauer(Harbor Freight) planer, to a miter saw?

The link does not work for the parts list. Great idea I want to use.

John What is the size of your mill drill? Sieg X2?? I was wondering how well it work for small items as I am looking to get one.

I would like to add to the discussion of PVC systems and the build up of electrical static charge. I have watched many systems that have been posted on KZfaq regarding grounding to prevent fires and explosive situations. The only thing that I could find with OSHA is that if the cyclone system is over 10ft in length the collection spot must be located outside of the building. Bottom line is to do as much research as you can to make yourself safe in your own shop. Be safe and enjoy life! OSHA link : www.osha.gov/dts/hib/hib_data/hib19970502.html

where was the 4 inch flex pipe purchased? Did not see it on your list of parts.

What are those cameras your using?looks like something I would like for videos

How's the static electricity build up on that system? I set one up for my dad a couple years ago. Somewhat similar to yours but smaller and we had to end up grounding the PVC to reduce static. I think we were using schedule 80, but that's not going to effect the static.

John, what kind of belt sander is that? I've seen them in other videos, but I can't find the brand.

where did you source the top for the trash can?

Wish you would address the questions related to static electricity. Newbs like me want to know.

II have a 6” pvc pipe dust collection system. I use 45 degree pvc pipe to go to my floor tools. My new 4” flex hose does not fit to the 4” pvc.. What fitting would recommend?

Old video, but for the posterity, many may be surprised that a good old high temp hot glue will hold on to these hard to glue plastics (LDPE and HDPE) of thrash cans and 5 gallon buckets better than silicone and perhaps even polyurethane adhesive, especially the crappy gorilla glue type that foams and gets hard.

I like how you did that to the trash can but what would be worth looking into is a dust deputy take a look at those you can get them for shop vacs and dust collection systems and they work real nice almost nothing goes through your vacuum system from the trash can

Can you tell me what brand clear hose you are using here ?

Just wanted to give some hacks I use that are cheaper and quicker. 4” j-hook to hang pipe are 80¢ at Grainger and I like in Alaska which is normally more expensive than the lower 48. Also look under Clevis hanger, pipe tie, pipe strap, conduit hanger, strut clamps- hell even metal strapping will work. Also you can use a 4” roof pipe flashing they’re $8 and can be bent to help hone in the dust. However you’re only as good as the blower motor... don’t skimp on that. I wouldn’t go less than 2 HP. And you can section off the area to dampen sound with a zipwall.

try dow corning 795 caulk be sure to clean everything with denatured alcohol first. 795 is good for 150 MPhil wind on glazing systems. 50yr warranty

Can you tell me what would be the blower capacity in relation to the size of the shop. My shop is 15 meters X 4 meter Is 1 horse power motor enough?! Or not?!

You can save a TON of money using sewer pipe instead of schedule 40. Schedule 40 is for “High Pressure.” You don’t need that for a dust collection system. You also need a good filter vs a bag. Bags don’t filter near small enough dust particles to help out with allergens in the air..

rough up the lid on the trash can, and the tornado, with a bit of sand paper. then use some silicone to attach them together.

Does spacing the 45 degree angle pieces actually increase airflow, or did you just do it that way so you could actually connect them (they look like they had double female connections)?

Do you find the trash can collection sufficient or would one be better to add a Oneida Cyclone for the second filtration?

With using PVC pipe how great is the concern of static electricity build within the PVC piping.

Superb

you said in the notes that you wished you didn't use the first stage separator. Which one do you wish you used?.

Thats some serious shit dude !!!!!

If you use duct seal tape, not duck-tape, it will help seal the system as we as being useful on your pipe joints. This is a silver tape used on duct work. The system will work much better by sealing off all the little leaks.

Very good for industrial applications

Nice job great system I have one concern you are sucking hot metal from your grinder that could be a possible fire hazard I know with all the wind and pressure that by the time it hits the collection bin the metal would have cooled off but still a bit risky otherwise great system

What is that wee sanding machine you have called thanks

how do i remove lingering sawdust from a small room? i used a hole saw to make a small hole in a wooden box and the sawdust has been lingering around. it was a small project so i worked on it on the restroom sink counter. now every time i take a shower, the sawdust smell comes out and i can feel the sawdust in my nose and mouth. it only comes out when the shower is started. i've tried vacuuming and thought i got rid of it but its still around..

great jobe

I can see that you got many comments about this video. It was very good and very informative. I would really like to talk to you about the dual camera system. I started a woodturning club in Ashtabula, Ohio and we have a camera system with two large monitors. I’m looking to upgrade our system to dual cameras and would appreciate any info you could supply. If there is a possibility that we could talk via telephone please let me know.