How to keep your mags clean and functioning well Buy mags: s.click.aliexpress.com/e/_dUg... don't forget that if you really like my content you can always buy me a coffee: buymeacoff.ee/EFH6qPMlX
Пікірлер: 182
@Isaac_Inkcubus4 жыл бұрын
Teens after school: 3:44
@beeboi36285 жыл бұрын
So thats why my mag wont feed. thanks man!!!
@danielrodgers87803 жыл бұрын
My mag won’t feed either. lol
@davidgatt98755 жыл бұрын
Thank you!, Just bought an M4A1 Gen 9. Had a lot of fun with it. The next day it didn’t work to my disappointment. I watched a few You Tube videos without any luck. Then I watched your video about how to empty the mag properly which fixed my problem. Thank you again.
@daveanderson18624 жыл бұрын
Very new to gel blasters mate Thanks heaps for all the info you give. Appreciate it.🙏
@runesrensen85512 жыл бұрын
just got my first gelblaster today. great advice with the mags.
@MrMarkguth3 жыл бұрын
Another tip, if you ever pull the mag apart for cleaning or repair, take the opportunity to drill a small hole near the motor, about the same size as the straw on a can of wd40, then you can give it a squirt of wD40 before storing, give it a dry fire when you have finished using WD40.
@AlRHORN4 жыл бұрын
Cheers for this video bro, just got my gel blaster yesterday and it was jamming, now I know why
@Ibeenblazin5 жыл бұрын
Valuable information. Much appreciated.
@brian_mickey3 жыл бұрын
What a great presentation on the gel blaster mags. So much information.. Very informative.. Thank you....
@P1TD0G3 жыл бұрын
Figured all this out like as soon as I got my blaster but thanks mate for explaining as there would be a lot who didn’t.
@sgtleska4 жыл бұрын
Great Video Low Guido. Thanks for the excellent work soldier! *salutes*
@trodengore5 жыл бұрын
i tip my rifle upside down and fire the last few gravity feed style to empty my mag completely
@lowguidoschopshop5 жыл бұрын
This also works. I do do this as well. But sometimes you get back from a skirmish and your spare mags still have some balls in them etc. Its good to know these sorts of things
@danielrodgers87803 жыл бұрын
I had to do the same thing too.
@realosty5 жыл бұрын
Great vid mate. I am just starting out with Gel Blasters and I've found your videos extremely helpful. Keep up the good work!
@chrismapley75135 жыл бұрын
Great tips mate thank u
@Gigitygigity244 жыл бұрын
This video popped up when I searched how to disassemble my FN SCAR 20S magazines lol. I had no idea these things existed until now. Pretty cool.
@lowguidoschopshop4 жыл бұрын
LOL the KZfaq algorithm works in mysterious ways.
@Gigitygigity244 жыл бұрын
@@lowguidoschopshop It certainly does. Funny enough it actually pulled from the main Google search page with your thumbnail as one of the top results. Also, I read my manual and it turns out SCAR magazines aren't supposed to be disassembled. That explains the lack of results lol
@masterblastergelsoftsports72334 жыл бұрын
very helpful thanks for taking the time.
@meekmild89644 жыл бұрын
Thanks mate, very helpful
@luke5g2305 жыл бұрын
Great tips mate thanks for you’re vids
@charlesconnors7282 жыл бұрын
Thank You very much, great video
@tomkitchen27644 жыл бұрын
As a newbie, that is excellent advise, thanks.
@jamiefreedom83203 жыл бұрын
Thanks mate worked for the arp9 wasnt feeding and thankfully for your video it explained why. thank u so much i thought thje gel balls grew to big or something or got stuck, simply is that magazine isnt full! ty
@kiowhatta17 ай бұрын
Standard gels are sometimes too big for certain blasters, and is the main reason why they don’t fire - or the feeding mechanism doesn’t produce enough power. Again, if you’re blaster only fires upside down it’s because the tube is blocked - often because the gels are to big. Unfortunately itynot a one size fits all.
@belleray23 жыл бұрын
Thank you
@justaghoulintheworld5 жыл бұрын
Nice tools.
@w8nc823 жыл бұрын
thank you
@pragma20173 жыл бұрын
Thankyou for sharing👍🏼👍🏼🇦🇺🇦🇺 just starting out with a M4A1 MK3 with hop up. Not like a 9mm pistol, so have To get perspective relative lol. But seems good from 8- 15m relatively accurate, powerful, I have a piece of string dangling from the ceiling seven times out of 10 from 10m I hit it. I have that Three prong target practice machine and it 8 m I’m nearly 100%. However Then after 20 22 -25m no power. Any suggestions. I want the same accuracy and power at 25-30m as I get from 8-10m, DONT KNOE IF ITS EVEN POSSIBLE WITHOUT GAS, SO if you had 800-$1000 what would you suggest if I can’t do much to upgrade my M4a1 to thoses specs please??PERFECTLY IN A IDEAL WORLD I want a battery operated gel blaster, that operated @ 380-450fps 20-30 shotsps and excellent power and accuracy from 10-30m???? Does that exist without gas????? Thanks please advise, stay healthy mate👍🏼👍🏼🇦🇺🇦🇺
@disruption7125 жыл бұрын
Great tips, just asking though, I have a ACR-J10 and when I go to load it, the balls only load into the side and not into the actual mag, I just brought the mag yesterday and haven't used them until now. How idea how to get the balls into the actual mags?
@concernedaussie13302 жыл бұрын
Thanks mate
@SEEYAIAYE5 жыл бұрын
Very helpful vid mate, while It's too late to save the spring from rust in my P90 mag from this rookie mistake, at least I can stop my 2 M4 mags from suffering the same fate. I also leave the mag feed hatch open and leave them in the sun for a bit too now to get rid of any residual moisture. Cheers.
@thatguy_jh22642 жыл бұрын
yea same wit me i fucked one of my mags for my sijun mk18 it was the one that came wit the blaster only one i had so jus bought a new one hopefully comes soon.
@shitchops3 жыл бұрын
Far out very useful info, i put 30 or 40 moist balls onto my mag 4 first shoot and nothing happened, i figuered it was bcoz mag was not full, i would have never guessed there was a motor in the mag sheeeit
@macgyver26153 жыл бұрын
Thanks for the great tip.. noob here :)
@MAVERICK-tc2vw5 жыл бұрын
TY CHAMP!!!
@jamiesuvo74205 жыл бұрын
I like all your KZfaq videos keep them coming and have you seen the new blowback AK gelgun i seen a short clip on it ? X Force tactical gel blasters put it up I think
@lowguidoschopshop5 жыл бұрын
yeah I saw the video.. I'm not blown away yet..
@Saintgoten5 жыл бұрын
Got like 3 spares coming in and a vest so we won't run into so many reload issues next skirmish haha
@kiowhatta17 ай бұрын
Gel balls are not a one size fits all deal. Idk why the retailer’s keep ignoring this issue but many battery operated blasters like the AKM - 47 and ACR frequently have gel balls get stuck simply because they’re too big. If you find your blaster only fires upside down or not at all, I guarantee it’s not so much because of small dehydrated balls, but because of regular balls getting stuck in the mag, or worse, in the barrel. The retailers need to start acknowledging this problem.
@markhaun51515 жыл бұрын
Can the button on top of the mag cause feeding issues? Acr j10 I’m working on won’t feed. The mag fills up.. I think the button isn’t sitting flat when it’s in the lower receiver. 6.5mm balls feed. 7mm won’t. All stock atm
@NightKillrx3jd92 ай бұрын
Can it do harm to your gel blaster if you have different mags and they make a different sound when mag priming your gel blaster? I have 2 types one makes a louder sound and the other a lighter sound
@behhn2 жыл бұрын
i know i’m very late but can you make a video of how to take apart the mag and put it back together
@xxaceey25xxgaming454 жыл бұрын
Yeah I had this problem and well the mag is buggered .. can you fix it by just giving it a good clean?
@reddragon16902 жыл бұрын
Do u know how to put back together a furdich gell ball magazine back together
@kizbo695 ай бұрын
So if my mag is left with 1/4 of full capacity my mag just wont feed if its all in the tube now?
@MirzaKhalid4 жыл бұрын
My magazine wobbles a bit so I attached a tape inside the magazine holder (front facing) of the M4A1 GEN9 blaster. Do you think its wise to do this? Or should I remove the tape? The wobble is no more after that but magazine is pretty tight and stiff now when taking out from the blaster. No feeding issues yet but when i take out the magazine some gel balls fall off...I worried if it will hurt the magazine's - blaster attachment spring in the future....pls need ur advice?
@junjuly70882 жыл бұрын
HI, I am new to gel blaster in QLD and I recently purchase a double bell glock 19, green gas. When I use soft gel ball that I have been using for SKD glock18. The mag of GBB does not hold the gel balls and pups every gel balls out with its spring tension. I also tried to put a singel gel ball in the mag lip, the size is ok to fit, but it gets broken or cut off in the lip. Is it torally normal? or I have a problem with my mag? I haven't tried ultra elite or similar hardest gel balls yet.
@kiowhatta17 ай бұрын
Something that has happened regularly to my AKM47 and ACR battery operated GBR’s is the feeding tube and/or barrel of the gun itself becomes clogged with gels. Usually the AK will only fire upside down. The ACR won’t even fire. I’ve been told by one retailer that these rifles actually need to be fed with smaller balls - something I never hear about, but is the only way these battery operated blasters will work. Anyone else have this problem?
@riezallee8852 жыл бұрын
can u show how to repair magazine for RX akm47
@razz0r19804 жыл бұрын
Thank you for the video - was a great help to know this. I went right to my new blasters and found a stack just like you said. Re the water from the balls in the mag - Do you recommend drying them first via a towel? like pad dry them a little?
@lowguidoschopshop4 жыл бұрын
I don't bother with a towel. just drain all of the excess water. if the balls are a little wet on the outside its good, just don't want to poor heaps of water into the mag.
A little off topic, but are JM Gen 8 and Gen 9 magazines compatible?
@troyw58324 жыл бұрын
☺😊😀😁😂5 smile's Drill your own hole if you need to!!!!! And add uv to the tube on the side set up the top, on at least one clip!😆 any upgrades from hobby king on the clip motor and its type?
@shitchops3 жыл бұрын
How long should i let the balls dry before shooting ? Soo much too know
@VeXeDZERO3 жыл бұрын
I just bought an M4 and the magazine will not prime. Not sure if I flooded the motor, might have, but that seems unlikely. Any way I can figure out if that's the case?
@kor2b5975 жыл бұрын
Do the gel balls only expand to there certain size? So once you soaked them you can leave them in water for storage?
@daniel_lobster4 жыл бұрын
KOR2B yes
@snazzy23975 жыл бұрын
Thank you should be very helpful
@waffenconvert4 жыл бұрын
sick lad
@alch3myau3 жыл бұрын
I just give it a good shake, seems to work ... and about 20 odd come flying out the tube
@Nonosquare20004 жыл бұрын
Do you know where to buy manual mags from bro, or anyone? I need to buy manual m4a1 magazines
@renz7x633 Жыл бұрын
how can you fix it from feeding too fast?
@SireSquish5 жыл бұрын
Awesome tips mate. BTW which gun/mag is that one?
@fedzalicious5 жыл бұрын
Looks like a JinMing gen 8 or gen 9 m4 mag. But an aftermarket one, as the standard ones aren't see-thru.
@runesrensen6634 жыл бұрын
Great video. Was wondering how the mags got the ammo to the blaster
@the_real_habibi3 жыл бұрын
Function*
@35millitia405 жыл бұрын
I'm assuming once you up the voltage that the feed rate is still equal to the the rate of fire that stock voltage was ? Obviously both motors are turning faster. Just for kicks you should overclock a mag with indipendent power, see if it'll fire multiple gels per stroke or if it just jams heaps badly haha.
@lowguidoschopshop5 жыл бұрын
the mag always feeds more than the blaster can fire. the mag motor is a constant so it is continuously feeding gels at the same rate. the blaster only fires one round per revolution of the sector whereas the mag never stops. so the restriction on feed is the blaster itself.
@craighocking20425 жыл бұрын
how to pull apart the Mag and clean when required? would also be a great tip
@caspercatsburg2320 Жыл бұрын
My gun doesn’t fire when I get the Meg straight do you know why?
@George-cp1vc5 жыл бұрын
Hi guys what size or spec is that motor? Does anyone know?
@alialshahrani2893 жыл бұрын
Is it possible to put iron ammo?
@paulparadoxia5 жыл бұрын
Hey BrU... Just bought my 1st one. know nothing about them.. Mag doesnt seem to be cycling the gel balls... any common reasons?
@brandonenzweiler11233 жыл бұрын
Dude I got the same problem
@oddnadatta17102 жыл бұрын
My gel blaster only shoots upside down do you know why?
@Zeeblur5 жыл бұрын
Do you drain then pat the gel balls down dry before using them in your mags/guns?
@lowguidoschopshop5 жыл бұрын
I have once poured all my gels onto a rug and picked out all the broken or distorted ones..
@minhthinhhuynhle91035 жыл бұрын
I'm so brilliant that after buying 2 M4A1 J8 and J9, i figure out right the way clearing remained balls just like your guidance :))))
@IchinoseCh5 жыл бұрын
I left the gel balls in the magazine when I was going away for a long time. So the magazine dont work no more. What can I do to fix it?
@fedzalicious5 жыл бұрын
You can disassemble the mag with a small screwdriver if it's totally blocked. There's several small screws holding it together. If it still doesn't feed, or you can't hear the mag motor during priming, the motor is probably water damaged from the gels "sweating" out their moisture. You can get a replacement motor (they are inexpensive but will require soldering), but a new mag is only $15-$30. Another weak point is the electrical terminals visible on top of the mag. If there is any dirt or corrosion on the terminals, power may not be getting to the motor. You can clean off any dirt, or corrosion can be removed with a small piece of sandpaper. If all of this sounds too hard, just buy a new magazine.
@funkyt0wn7764 жыл бұрын
Or just buy a new mag
@LONGCAUSE3 жыл бұрын
@@fedzalicious where can i go to find a replacement motor?
@fedzalicious3 жыл бұрын
@@LONGCAUSE magazine's are pretty cheap. It's hardly worth mucking around. But if you remove the motor and take it to an electronic component store, like radio shack, they might be able to match it. Otherwise you can try to find it on Ebay or Ali Express.
@sarvove3 жыл бұрын
Use a 9 v battery for the mag check
@raymondbetancourt64982 жыл бұрын
Should I drill a hole the same size as yours.under the motor if it doesn’t have one ?
@lowguidoschopshop2 жыл бұрын
it wouldn't hurt.
@deon34able Жыл бұрын
Hi mate, what function the little button in top mag? is it OK when disabled ?
@lowguidoschopshop Жыл бұрын
Its to stop gels falling out
@alphashot39102 жыл бұрын
bruh I just started playing with gel blasters and I got the gel balls relatively dry but didnt realise they had to be fully dry
@lowguidoschopshop2 жыл бұрын
Just most of the running water out if fine. They can be a bit moist. You just dont want to be pouring too much water into your mag.
@shawn7627 Жыл бұрын
New gun,Question? Power isn’t getting to my magazine on my gel blaster. The blaster shots but no power is going to the magazine. The magazine is good and works in other blasters. What could be the issue?
@lowguidoschopshop Жыл бұрын
Is it a CYMA?
@user-fr9si2ft1z5 жыл бұрын
good vids mate because a lot of people do the wrong thing to the mag
@daleymoore69355 жыл бұрын
I have a gel blaster and when I pull the trigger it just makes a dentist drill sort of noise and the balls don’t feed through
@lowguidoschopshop5 жыл бұрын
your pinion gear may be stripped or not engaged properly.
@daleymoore69355 жыл бұрын
How do u think I can fix this
@SEEYAIAYE5 жыл бұрын
This happened to my P90 after mag dumping for a while, the pinion gear slipped off and wouldn't reengage. I took it apart and easily fixed it. It's easy as mate, look at any of Low Guidos vids on how to disassemble your blaster and be very wary of switches and springs popping out before you fully put it back together.
@lesgooley4 жыл бұрын
Very helpful video as the instructions that came with my blaster were in Chinese. 😅
@weariedash13592 жыл бұрын
Was it a scorpion?
@davidcortez84963 жыл бұрын
I have the splat r ball what happens if I use non brand orbeezs
@lowguidoschopshop3 жыл бұрын
so long as they are the same size the should be fine.
@E85_STI3 ай бұрын
The mag I have the balls fall out of the top of the mag as if the catch up top is not strong enough to hold them in
@lowguidoschopshop3 ай бұрын
That's pretty normal
@djkingshit95015 жыл бұрын
Ironically i watched this yesterday and today went for a blast only to discover i hadnt cleaned my mag properly last time due to being in a rush is there anything i can do i got my mag taken apart and drying out in the sun atm to clear up residue
@lowguidoschopshop5 жыл бұрын
just letting it dry and shaking out the dehydrated balls should help.
@djkingshit95015 жыл бұрын
Yea iv tried letting it dey out as much as possible and took it completely apart to make sure n clean out dehydrated gels n unfortunately still not working
@alexarnall57095 жыл бұрын
Spray the motor with wd 40 over a few days. It will free up done with mine many times.
@timjohnun42973 жыл бұрын
Nobody wants shrivelled up little balls! On a serious note, do you have any ideas why the magazine feed motor keeps running in my AUG? I've traced the power wires back to the plug at the mosfet, it has 8 volts to it constantly. Thinking faulty mosfet?? Cheers
@annapurnazone10695 жыл бұрын
Blaster g maine v kar diya chk
@joechip4784 жыл бұрын
what should you do if you accidentally left some gel balls in your mag and they shrivelled up
@lowguidoschopshop4 жыл бұрын
You can always open it up and clean them out.
@pugestpug58795 жыл бұрын
How do I store my gel balls and can’t leaving them in water stuff the gel up?
@lowguidoschopshop5 жыл бұрын
Drain them and put them in an air tight container.
@878SurvivorFM5 жыл бұрын
I read a comment somewhere saying put a squirt of wd40 in there as well, thoughts on that?
@lowguidoschopshop5 жыл бұрын
I have never used WD40 so I can't really comment
@fedzalicious5 жыл бұрын
According to the WD40 website it is safe to use on electronics. WD stands for "water displacement", so it should help protect the motor, in theory.
@liamgriffiths52894 жыл бұрын
Are gel blasters legal in wa
@CYANITRIC265 жыл бұрын
may i ask? when i pull the cocking handle (or bolt handle), nothing happens. no sound or anything. but when i pull the trigger, theres firing sound.. is this my mag problem or my wgg? thank youu... im having this issue since the day one...
@lowguidoschopshop5 жыл бұрын
what blaster?
@CYANITRIC265 жыл бұрын
@@lowguidoschopshop its JM Scar L V2
@geoffreyvonmarkirada88237 ай бұрын
im new for this.. what is the difference of Prime mag than a normal mag?.
@lowguidoschopshop7 ай бұрын
The mag priming is a function of the blaster and not the mag itself.
@eliezergunawan4 жыл бұрын
Are all jinming's magazine compatible with all the jinming m4, especially the M4 Terminator? Pls answer :)
@lowguidoschopshop4 жыл бұрын
they all share similar geometry, the hole and terminals are in the same place. the terminator has a side bar type gel stopper, where as most modern mags have a top push button design.
@eliezergunawan4 жыл бұрын
@@lowguidoschopshop so they're compatible right?
@lowguidoschopshop4 жыл бұрын
@@eliezergunawan which specific mag in which specific blaster?
@eliezergunawan4 жыл бұрын
@@lowguidoschopshop warinterest's hex mag and jinming's M4 terminator, i think the mag size are the same with other jinming's mag
@lowguidoschopshop4 жыл бұрын
@@eliezergunawan I'm fairly sure they should fit. but I don't have one to test, so I cant be 100% but.. pretty sure.
@diecastmodsrc84923 жыл бұрын
I put huge amounts of grease coating the motor & filled the gap so water can't enter & corrode my motor
@CraftyMum705 жыл бұрын
hi can you get the door fixed if you brake the little clip ?
@lowguidoschopshop5 жыл бұрын
I have seen some 3d printed options here and there, but generally not too common.. replacement mag is relatively cheap.
@deoranje10425 жыл бұрын
I wanna buy a metal or alloy mag for my jinming gen 9 and ldt hk 416. Do you know about this metal mags??? Need help
@softonal79525 жыл бұрын
yes i believe they are made of metal
@deoranje10425 жыл бұрын
@@softonal7952 : so where i can buy metal mag for jinming gen 9? Is really2 hard to find for gen 9. Not like gen 8 whos got bunch of third party built the metal mag.
@@softonal7952 : That for gen 8 mate, not for gen 9. A metal magazine for jinming gen 9 is really hard to find
@shahrulnet31342 жыл бұрын
What about the balls that burst inside the mag?
@ussmc13 жыл бұрын
My mag doesn't have a side door like yours. How do I open it?
@lowguidoschopshop3 жыл бұрын
Its probably on top under the wire terminals
@CryptoSeann4 жыл бұрын
Does this apply with pistol mag
@lowguidoschopshop4 жыл бұрын
If it is an electric mag like the SKD glock or m90two then yes.
@Arrow8D3 жыл бұрын
i have a kriss vector and when there is about 30 shots left it just wont fire them i dont know whats wrong with it
@lowguidoschopshop3 жыл бұрын
But it works when the mag is full?
@Arrow8D3 жыл бұрын
@@lowguidoschopshop yea but as soon as it gets to 30 shots left it stops firing
@lowguidoschopshop3 жыл бұрын
@@Arrow8D that's normal.
@behhn2 жыл бұрын
because i took mine apart and i don’t know how to put it back together
@haSarudeen5 жыл бұрын
Well m401 Gell balls does not comes up from the Cartridge to gearbox...Why??? Pls help me
@lowguidoschopshop5 жыл бұрын
check that the motor inside the mag is working.
@haSarudeen5 жыл бұрын
Semi mode not work in well m4. Working like full automode.how can i repair?
@lowguidoschopshop5 жыл бұрын
@@haSarudeen have you opened the gearbox? there is a rocker inside the gearbox which disables after 1 shot. it is possible that this rocker has been disrupted.
@haSarudeen5 жыл бұрын
@@lowguidoschopshop pls make one vedio for this type issues.... It is very useful for us...
@haSarudeen5 жыл бұрын
@@lowguidoschopshop my magazine motor is working well. Then where I need to check
@liamgriffiths52894 жыл бұрын
Should i keep the gel balls in the fridge when I'm not using them
@lowguidoschopshop4 жыл бұрын
I don't think it needs to be in the fridge but somewhere cool helps, if you are keeping them for a long time. I keep mine in the basement where it is relatively cool
@liamgriffiths52894 жыл бұрын
@@lowguidoschopshop ok thankyou love your vids they've been very helpful
@mrkillroth39694 жыл бұрын
What about gel pistols? Do they do it the same way?
@lowguidoschopshop4 жыл бұрын
Some do. And some don't. It varies from model to model
@mrkillroth39694 жыл бұрын
Low Guido's Chop Shop oh ok thanks, I might be getting one soon so I was starting with a pistol
@Saintgoten5 жыл бұрын
whens our customs coming in g
@lowguidoschopshop5 жыл бұрын
Soon
@parker87554 жыл бұрын
The person I bought from said to pour water in if it dosnt work😭😭