Excellent video with clear cut explanation...thank you
@GelBallUndercover3 жыл бұрын
Thank you for the support Sarah!
@Needboost259 ай бұрын
All I heard was just buy a gel blaster with metal gears already installed
@Superfly19163 жыл бұрын
Thank you for making my life easier 🙂
@GelBallUndercover3 жыл бұрын
The pleasure is ours Flynn! Thank you for the support. :)
@duanecribb761611 ай бұрын
Great vid bro 👌
@oldmatedouglas3 жыл бұрын
Dude, this was incredibly helpful. Thank you.
@GelBallUndercover3 жыл бұрын
Thank you for the support legend!
@Braydon19Ай бұрын
@@GelBallUndercover you know where I can find a upgraded gear box for the pulsar pro just got it but can’t find it anywhere
@cheongleonard6120 Жыл бұрын
Excellent information for beginner like me!!! Thank you thank you thank you!
@GelBallUndercover Жыл бұрын
Our Pleasure!
@annonymusbi19552 жыл бұрын
Hey there if I just upgrade to metal gears ladder 1.4mm spring & 11.1v battery will it be a issue with the gel blaster looking forward to an answer
@gavincleland90102 жыл бұрын
Just got a splatrball srb400, will it be worth my time to upgrade my piston, o rings, and nozzle alone? I'm not planning on upping the voltage or using a tougher spring anytime soon, but I'm considering a hop up muzzle
@stephanieowens95202 жыл бұрын
I got a srb400 and put a 11.1 v batter and after about 20 minutes of using its the snapper plate I believe you said its called snapped and its made out of metal stock do you have any suggestions on how to fix it ?
@StarkhPaintball11 ай бұрын
really cool vidéo and helpful
@lukeroelofs29682 жыл бұрын
i have the base 400 model of the splat r ball guns, could i buy a new cylinder head or tip metal on the nylon/plastic gun?
@CEOofSleep8 ай бұрын
What should I modify if I want to reduce the sound for the blaster? Cyma nylon m4
@zykotic66492 жыл бұрын
Will this work for the splat r ball in the US?
@fauzifikri78053 жыл бұрын
Thx bro. I literally have repeat assemble and teardown almost 10 times.. And same shit happen. U help me a lot tru this kind explanation.
@angelcarvajal86373 ай бұрын
Can the gearbox be modified to work on 6mm bb (considering the barrel for 6mm BB)
@user-us6oo9qv9n4 ай бұрын
i have wd pdx with metal gears but using 7.4v battery. Can i use 11.1v for it? what should i upgrade to for upgrading battery sir
@osmondasson69027 ай бұрын
I have a sdk cs002, how much would a complete upgrade cost
@user-us6oo9qv9n4 ай бұрын
can i use 11.1 with my nylon gear bix with metal gears??
@edwardbonilla31762 жыл бұрын
Can you upgrade gel blaster surge?
@pabpabengko-tx8gf8 ай бұрын
How can i buy a custom arp9 im from the philippines, when i go to ur website and i click add to cart it all just keep loading all the tym, can u help me
@DeviousDaniel-wz7gw7 ай бұрын
does the website deliver to the philipines asking for a friend
@devrajpatel778 Жыл бұрын
Can you do this for the JM X2? 👍🏽
@deathpresent101 Жыл бұрын
When replacing the gears and piston with metal, is it a good idea to upgrade the motor and battery? Or do you only need to do that when you upgrade to a more powerful spring?
@tracstonsantos18522 жыл бұрын
Will it work for any gel blaster
@ludymarhernandez98535 ай бұрын
What size of metal gears for cyma m4?
@gavincleland9010 Жыл бұрын
Hey again! 2 months later and my first srb 400 just kicked the bucket. I was between buying another and replacing the internal gearbox with a more reliable brand name one, I'm just not sure what would fit. It appears to be the same dimensions and shape as the m4 gearbox.
@GelBallUndercover Жыл бұрын
you would have to call our shop bro and we can give you the information you need
@fellenchristianagta60212 жыл бұрын
Where to buy sir?
@jacknugent2473 жыл бұрын
Do you know if a XJL M4-K300 Can be upgraded to metal parts ? It has nylon stuff in it but I am not sure how it all works, thanks !
@light_it_up6046 Жыл бұрын
ok so I have upgraded all the internals to metal including metal spring restrainer with a 1.5 Unequal Spring i put it all back to together and i pull the trigger and it goes for a second then sounds like it binds do you know what might be happening here this is on a M4A1 (V8/Gen8)
@GelBallUndercover Жыл бұрын
spring is too big or the piston locked back into the gearbox. or the motor just isn’t strong enough to pull the spring
@Jon-ne9gy2 жыл бұрын
What piston should I use for the splatrball branded one ik the gearing is 18:1 but what piston should I use
@GelBallUndercover2 жыл бұрын
SHS piston with head bro
@mauygarcia1750 Жыл бұрын
Do you have any good upgrade for the gel blaster surge? I put a tracer unit on it and I don’t want to remove it so I just want to upgrade it
@GelBallUndercover Жыл бұрын
Unfortunately not for gel blaster surge.
@GrimTransmission Жыл бұрын
Are all v2 gearboxes interchangeable between manufacturers? I have a JinMing ACR J10 and wanted to chuck in a well's metal v2 gearbox. Just eyeballing them they seem to be the same but am I missing something?
@GelBallUndercover Жыл бұрын
They are the same concept but not interchangeable as a direct swap unfortunately, its more so the style is V2 as a pose to V3. So you would need modifications and thr correct nozzle and t piece combos and fitment etc anything is doable it will be the mods that will be the hardest part.
@ryanmyles62763 жыл бұрын
I have just got a M4 V10 and I'll be upgrading the gearbox and the barrel, is the M4 V9 the same as the V10 for parts and barrel if you can help me anser this question I would really appreciate it ? :)
@GelBallUndercover3 жыл бұрын
Hi! No, the V10 is a bit different for some parts, it will be hard to find perfectly compatible parts however we do have a section on our website right here dedicated to the V10. www.gelballundercover.com.au/collections/m4a1-v10
@troy68823 жыл бұрын
Bad air seal on the plunger head nozzle that double Oring is useless due to the head nozzle tube is slightly smaller I used the original JM cylinder head and a double Oring was sealed You did the test full lock unlike the nylon there but I felt it blow???check it later!🧐🤕
@ferrysenjaya55992 жыл бұрын
What spring is safe for nylon gearbox? Is it 1.3, 1.4 or more?
@GelBallUndercover2 жыл бұрын
M90 shs spring bro
@samuelgii91963 жыл бұрын
Is the h92 mk metal gearbox can be use in SLR HK 416? Or is there any other metal gearbox compatible? TA.
So I got the lighting blaster Where can I get these upgrades done ?
@GelBallUndercover Жыл бұрын
Call our shop mate we do everything here =)
@BahnGop7 ай бұрын
The flat gear on the piston is called a Rack, not a ladder lol
@papawhiskyuass57256 ай бұрын
theres this kind of cylinder , it says that 80% 90% and soo on... what is the best 1 for slr???
@GelBallUndercover5 ай бұрын
either the lower % for shorter barrel there higher % for longer barrel.
@papawhiskyuass57255 ай бұрын
@@GelBallUndercover any recomendation METAL GEARBOX for bohan SLR... please... just the shell only
@papawhiskyuass57255 ай бұрын
where can i order SLR METAL gear box
@Noelmorados1995Ай бұрын
What is the spare metal for gears arp9 v2 upgrade ?
@GelBallUndercover22 күн бұрын
SHS Carbon Steel
@BobBobby-wl1vo2 жыл бұрын
Where can you buy these upgrades?
@GelBallUndercover2 жыл бұрын
www.gelballundercover.com.au
@jasonmyers45282 жыл бұрын
Do you deliver to the US?
@GelBallUndercover2 жыл бұрын
yes
@ravishogre8682Ай бұрын
the tapper plates on v2 and v3 gearbox are the seme zise?
@GelBallUndercoverАй бұрын
Yes depending on what the internal mods are.
@ravishogre8682Ай бұрын
@@GelBallUndercover thanks for your response, I have a broken tapper plate and I dont know how to replace it, its from the x-shot hyper gel hpg-700
@GelBallUndercoverАй бұрын
@@ravishogre8682 Not too familiar with that one sir maybe add us on instagram and show us some photos.
@JG_113227 күн бұрын
Tutorial on how to upgrade a Gel Blaster Pistol?
@GelBallUndercover22 күн бұрын
We have that video on our channel already bro.
@samuelgii91963 жыл бұрын
Do you have a review about hk416 ?
@GelBallUndercover3 жыл бұрын
Not just yet, sorry!
@mavzxodiagaming77122 ай бұрын
Whats the name and its brand of the cylinder head?
@GelBallUndercover22 күн бұрын
Visit our website! www.gelballundercover.com.au
@Mellymel-kg9re24 күн бұрын
Where do I buy the gears?
@GelBallUndercover22 күн бұрын
Right here homie: www.gelballundercover.com.au/products/shs-airsoft-181-gears?_pos=1&_sid=949c7849c&_ss=r
@abdulrahmanreciteation3 жыл бұрын
You reckon I can use hot glue for the o ring and put grease
@GelBallUndercover3 жыл бұрын
Not advised!
@abdulrahmanreciteation3 жыл бұрын
@@GelBallUndercover ok
@abdulrahmanreciteation3 жыл бұрын
@@GelBallUndercover for my ssg69 I didn’t find any bolt lock for mine it has worned out but I put a metal can on mine it still slips but so time work do you know any one that will make one I can’t find any at all
@kazukilee60823 жыл бұрын
is Lehui AUG compatible with this?
@GelBallUndercover3 жыл бұрын
The fundamentals are the same yes!
@kazukilee60823 жыл бұрын
@@GelBallUndercover Dayummmm! Thank you very much! :)
@mikkveere1409 Жыл бұрын
Really cool video. The problem is I cant find spare parts for my p90. Need to upgrade, cause my bullets just plain drop to the ground as they leave the gun... ok... i get maybe 15 meters in arc... I got 6v stock battery( ik it sucks).. I rlly need help here.
@theayuwoki3569 Жыл бұрын
Change to a 11.1v battery, check if your piston assembly doesn't leak air, and use a hop up. This should make your blaster to work better
@mikkveere1409 Жыл бұрын
@@theayuwoki3569 yeah, i took it apart a while ago... the piston didnt even touch the walls of the cilinder :,D Made in china. I changed the plastic barrel to aluminium and it improved a bit. But plastic gearbox is my biggest worry if id make that thing airtight.
@mikkveere1409 Жыл бұрын
@@theayuwoki3569 ps I actually drilled and melted that plastic tube out of its adapter and stuck in an aluminium tube.
@theayuwoki3569 Жыл бұрын
@@mikkveere1409 The problem with 11.1v is that you could strip the plastic gears, so it's also a good option to buy metal gears
@mikkveere1409 Жыл бұрын
@@theayuwoki3569 thats where the problem starts. There aint any available in my region. And they do not ship this stuff here either.
@G42J3T3 жыл бұрын
You forgot the piston o ring, $2 o ring will dramatically increase the fps
@GelBallUndercover3 жыл бұрын
Definitely! Always a green upgraded o-ring. :)
@filmntvguy19778 ай бұрын
What about shimming the gear set?
@Shaziz-co8oh2 жыл бұрын
Can this gearbox fit to jingji slr v2?
@GelBallUndercover2 жыл бұрын
yes the V2 version does
@franco819011 ай бұрын
hi, can you do a gear box (internals) of a gel blaster pistol... a bereta pistol will be a good example.. tnx tnx..
@murr73352 жыл бұрын
Can you do something like this with pistols?
@GelBallUndercover2 жыл бұрын
we specialise in pistol bro !
@MTS89010 ай бұрын
I thought gel blasters was just a backyard thing
@tankers4all5 ай бұрын
LEAVE ME ALONE! :Nylon[echo] AHHHHHH! :Nylon[echo] AHHHHHHHHHHHHHH! :Nylon[echo]
@whitefox61322 жыл бұрын
Can I upgrade a china blaster 😂
@hafizteam47592 жыл бұрын
Me too . I want to know if can be upgrade
@matpolson4411Ай бұрын
Not a fan of metal gearboxes, Broken few of them, never Brocken a nylon one