pov: you hear your motion sensor animatronic singing in the other room... your home alone
@Elimad05022 жыл бұрын
Come to think of it after experiencing with head motors on lifesizes, I don't think you really needed to completely take him apart in the first place. I think all you had to do was locate the motor on the shoulders, take it out and replace it.
@HolidaySpirit044 ай бұрын
On the dancing ones, you actually do have to take it apart because the only way to access the screws to remove the motor to completely flip the head mechanism over. I’ve repaired tons of lifesize Gemmy animatronics and when I had to replace the belt for my Dancing Santa’s head, I had to remove the body shell and everything so I could replace the belt.
@lakewi444 жыл бұрын
Any ideas on where I can get a good replacement motor for my life-size 5 foot Santa? It's for the dancing mechanism
@riftdream34 жыл бұрын
uxcell 7100 RPM DC 9V 1.5A 61.2g.cm Micro Motor for Cars DIY Hobbies
@MunchsMakeBelieveBand4 жыл бұрын
Thx, I repaired it!
@29bobby19842 жыл бұрын
The dancing motor started smoking and went out on my Santa. I found a replacement motor that fit perfectly but needed 12v, so I also put in a power boost to up it to 12v. It still didn't work. When I tested the output voltage from the cable (blue and green wires) on Santa, I am getting less than 1v when it peaks. What should the output voltage be on Santa's cable? Any help is appreciated.
@jakobfred3 жыл бұрын
My motor isn’t turning for the dance feature. Any suggestions? And the head moves to the left and not to the right. And the lip moves sometimes.
@Wheresthepepsibismol7 жыл бұрын
hey what does a speaker on a life size animatronic look like
@Browzers2 жыл бұрын
I need the plastic sprocket from inside from motor unit. Any ideas
@krisdaan14064 ай бұрын
Can you send a link to the video you were watching?
@frankiepnightriderouternat26832 жыл бұрын
Hi I have a UK 2006 santa model but motor gone any suggestions as to where I could obtain a new motor in UK or order from USA pay carriage please Frank
@robertyost803010 ай бұрын
On the neck motor you are working on underneath is a bigger motor ran by a belt that moves his arms and body mine is blown out what size motor do I ask for does your motor say what size it is I know it's a 9 volt dc but what speed do I get .
@kennyharkcom92244 жыл бұрын
Where did you get the motor mine just went out and I can’t find them anywhere?
@animatedchristmascollector37544 жыл бұрын
Kenny Harkcom The 9v motors are really hard to find
@riftdream34 жыл бұрын
this will do the trick uxcell 7100 RPM DC 9V 1.5A 61.2g.cm Micro Motor for Cars DIY Hobbies
@ronaldstead4272 Жыл бұрын
I’m looking for life size gemmy Santa motor. Does anyone know a source. Thanks
@benwilliams24694 жыл бұрын
I bought one off Facebook marketplace and the head doesn’t turn do you know what’s wrong with it
@bigsad47673 жыл бұрын
It’s either the gears or the motor. Take of the head and see if see something is spinning, if so yo7 have a broken gear.
@camiloobandomartinez83923 жыл бұрын
Split gear or fried motor
@OGTallis5 жыл бұрын
Just got our Santa out this year and he starts to sing and dance, as he should, then about 30 seconds later, he just stops. Do you have any suggestions? Thanks in advance.
@MarkFisk15 жыл бұрын
Make sure you are using the correct transformer. It not only needs to be the right voltage but also enough amps....probably 1.5A or 2A
@camiloobandomartinez83923 жыл бұрын
9v 1.5A Maybe he got fried
@OGTallis3 жыл бұрын
@@MarkFisk1, thank you. You were correct, but for some reason I never replied years ago. This just happened to pop up.
@OGTallis3 жыл бұрын
@@camiloobandomartinez8392 ,we were using the wrong adapter. Two years later and he's still entertaining us and scaring toddler grandchildren. Lol
@paolaandreapineda5524 жыл бұрын
jenial
@AussieFIag3 жыл бұрын
Any suggestions on a Santa that is in the down position and I can't get him to pop up. I have pushed down on his shoulders from every angle and h e just won't pop up.
@animatedchristmascollector37543 жыл бұрын
Found you again lol
@AussieFIag3 жыл бұрын
@@animatedchristmascollector3754 Yes lol... I have been trying everywhere to get h help lol
@animatedchristmascollector37543 жыл бұрын
Tell me when you solve the issue! -Gemmy Bear
@AussieFIag3 жыл бұрын
@@animatedchristmascollector3754 fingers crossed it will be tomorrow 🤞
@animatedchristmascollector37542 жыл бұрын
@@AussieFIag hahaha thought I’d check back since I needed to fix mine néeded some tips and found you again! How did it go this year?
@legionfrog3138 ай бұрын
How do you keep the motor in place mine is loose the one that moves the body
@HolidaySpirit044 ай бұрын
There’s supposed to be two mini screws that hold the motor in.
@legionfrog3134 ай бұрын
where would they be located? @@HolidaySpirit04
@HolidaySpirit044 ай бұрын
@@legionfrog313 For the body motor, it slides into the slot and the slot has two mini holes which is where the screws would go.
@legionfrog3134 ай бұрын
i never saw them, i think mines broke for screws. got pics?@@HolidaySpirit04
@marshapugh98765 жыл бұрын
Where did you get new motor?
@gemmymasteranimatronics7685 жыл бұрын
It's actually his original I think
@gemmymasteranimatronics7685 жыл бұрын
The one Bailey sent was bad
@riftdream34 жыл бұрын
uxcell 7100 RPM DC 9V 1.5A 61.2g.cm Micro Motor for Cars DIY Hobbies
@rayedwards-walton67963 жыл бұрын
I’m getting a spinning snowflake snowman for my birthday end it is going to have a split gear and spinning arm how do I fix it’s spilling arm who it will work like it was bought off of Amazon not you not used brand new
@Colethetrainman Жыл бұрын
28:33
@benwilliams24693 жыл бұрын
How did you learn how to repair all this stuff you must have study hard in school
@gemmymasteranimatronics7683 жыл бұрын
Oh no lol, I wasnt that good in school, my grandpa and dad use to fix things sometimes, I more of learned how to replace the split gears from the gemmy fan
@animatedchristmascollector37543 жыл бұрын
Lol
@emilyphippen87424 жыл бұрын
Mine will not work this year. I plug it in and press the button and nothing! Any ideas on what it could be? Does the switch go bad?
@gemmymasteranimatronics7684 жыл бұрын
Its possible I guess, but did you make sure it wasnt on the microphone setting? And make sure you didnt use any voltage higher then 9 volts?
@marcellatoby6 жыл бұрын
You do not need to use the vulgar language and bring the Savior Jesus into it..