This video shows some basic commands such as how to model building shapes and add windows to walls. If you found this useful and want to buy me a coffee, please go to: bit.ly/1BU45bk Email me at waynegmit@gmit.ie
Пікірлер: 41
@shubhamgupta51872 жыл бұрын
Very helpful I need a series as I am currently learning
@rohithdesikan5 жыл бұрын
Is there a way in IES to rotate multiple individual objects each by a certain angle. For example, I need to rotate the fins on the window of a building to face east. I have 469 fins and I do not want to do it manually. Is there a good, quick way to do that?
@50yachts976 жыл бұрын
Nice video, how do you sort out intersections. When I use the prism function to draw a room within a room I always get a intersection dialog box, I've tried looking at the model it handbook but it does not discuss this issue.
@CADandStuff6 жыл бұрын
Hi. You can partition spaces after you’ve created the overall shape, but it can be fiddly. What I do is I build the model one room at a time, rather than starting with the overall shape. For example, if I have a square room that has a smaller square room in one corner, I’d draw the smaller square first using the prism option, then I’d draw the larger room around that (essentially an “L” shape). If room boundaries overlap, there’s a good chance simulations will not run. Similarly, if there are small gaps between room boundaries, the simulation might run, but the results might be wrong.
@dhanyasiva45322 жыл бұрын
Very useful video. I am new to IES VE software, Could you please make some videos on attaching dxf files and working on the geometry with these dxf files.
@samahkhalaf8370Ай бұрын
How do I download the program for free? I need it urgently. @dhanyasiva4532
@bashiryosef7 жыл бұрын
Hi CD and Stuff Today i start learning about IES -VE . So i would like to advice me if this Video will be first step to learn or this for stage later ? i dont know any thing about this program before and today i have to start learn it . Thanks
@CADandStuff7 жыл бұрын
Hi. I would say that learning how to draw the geometry of your model is a good starting point. There are other settings too, such as the building template manager, which are important and some people may say that is a better starting point, but I always start with the geometry when teaching my own students. There are some good guides available from the IESVE website at the following link: www.iesve.com/support/userguides If you have any specific queries, you can reach me via email to waynegmit@gmail.com
@waepatrickyakinao41749 ай бұрын
Can you please give an example of this, (Generate a 3-dimentional model within IES VE using the dxf file)
@bashiryosef7 жыл бұрын
Do you have any Pdf or power point for introduction of IES Thanks
@CADandStuff7 жыл бұрын
Hi. No, I do not have anything like that, but there are guides available on the IESVE website: www.iesve.com/support/userguides
@ryanmg40683 жыл бұрын
Can you please make a video to show how to edit a complex geometry that has already been created like creating hole on the floor, different types of roofs (flat roof,) and so on
@CADandStuff3 жыл бұрын
Good suggestion. My time for creating new videos is quite limited lately, but if you can send me an example of geometry that you’ve made, I’ll have a look. Best email for me is cadandstuff@gmail.com
@tamerqsoos79186 жыл бұрын
Hi CD and Stuff I am trying to learn how to edit a space that already exists, I want to change the dimension of it. can you help me in that? Regards,
@aarondetmer9462 жыл бұрын
while in the axonometric view, click on the space you want to edit, use the drag face command on the side of the room you need to change.
@BrilloBallZ3 жыл бұрын
Hi CAD n stuff, just starting out with IES, Have you any experience with sketch up to ies. Is creating a model in sketchup easier ?
@CADandStuff3 жыл бұрын
I used sketch up for a short while about 11/12 years ago just to give it a try out. Haven’t used it since, so I’m not sure about how it works with IESVE.
@dickyrock1 Жыл бұрын
Thanks for the video. Could you look at part L and the Irish regs please when you can
@CADandStuff Жыл бұрын
I don’t have a video specifically for the Irish Part L. You can use the techniques in my videos and apply them to the current (changeable) regulations easily enough. The main thing to consider is the overall u-value for the fabric element and the item itself. How the u-value is achieved is less important (e.g. the thickness of each material is up to you, so long as the overall value is at or below the regulation value).
@dickyrock111 ай бұрын
@@CADandStuff Ok thanks, appreciate the reply and tips. Keep up the good work
@hvacworkshop47916 жыл бұрын
Today i start learning about IES -VE . I opened IESVE, and found the "binocular" isn't there. I have 2017.3
@TheGirlababy5 жыл бұрын
Hi I am new with IES VE, I am trying to simulate a basement. do you know the best way to do this. I attempted one but I wasn't sure how to connect my underground basement to my building via air pumps. I am also not sure if IES VE is registering my basement as an underground structure. I can send my model to you.
@CADandStuff5 жыл бұрын
Sure, send the project folder to me and I’ll have a look. It will be next week before I’ll get a chance to check it out, though.
@TheGirlababy5 жыл бұрын
@@CADandStuff hey here is the link drive.google.com/open?id=1_daskqxuHIbjAs-KtkDQMSiH0fjY9eq7 to my underground space i have model a house and the underground space as different structures. My underground space consist of 3 boxes, the outer box is insulation, the inner box is thermal mass and the normal underground structure. the air temperature in the underground space still varies with the outside temperature despite me doing this. Do you also have tutorials on Apache HVAC, I am trying to use the air temperature in the underground space to heat upand cool up the building.
@yahyaibraheem78997 жыл бұрын
Hi there, I was wondering if there is anything here about IESVE batch file or how to work out batch processing in VE? Thanks :)
@CADandStuff7 жыл бұрын
Yahya Ibraheem Hi, no I don't use that function with my class, so I have no video for it.
@yahyaibraheem78997 жыл бұрын
No problems, thanks anyway
@CADandStuff7 жыл бұрын
+Yahya Ibraheem ok
@CADandStuff7 жыл бұрын
+Yahya Ibraheem ok
@mzani2 Жыл бұрын
Hi, trying to design a building with natural ventilating system and I'm fairly new to ies, any chance you could be of assistance please.
@CADandStuff Жыл бұрын
Yes, anywhere you see me working on ventilation in my videos, that is natural ventilation. Have a look at those.
@sprasanna19055 жыл бұрын
please tell me how to make zones in a IES VE i have a drawing but i want to analyse a part of the drawing
@CADandStuff5 жыл бұрын
Have you drawn the model so that each room is a separate item?
@sprasanna19055 жыл бұрын
@@CADandStuff No Sir i have a model prepapred i am just opening it in IES VE through open file and then through your video doing different analysis but one of my task is that i have to do it for one part of the building like a zone and not for all the building.
@CADandStuff5 жыл бұрын
The key to this is to make sure that you have modelled individual rooms as “rooms”’in IESVE. If you try to import geometry from other software, you have to be very careful that there are no overlaps or gaps in the geometry. Depending on the complexity, it might actually make sense to build the model from the very start in IESVE, rather than importing something that might cause problems. When you have rooms modelled individually, it is relatively easy to extract simulation results from just the room(s) you're interested in, rather than the whole building.
@vasukalyan67043 жыл бұрын
I want learn geometry Created of This software so any help to me trained on this .thank you
@CADandStuff3 жыл бұрын
If you want to book some time with me for specific training that is not covered in the videos, please contact me and I’ll go over the details with you.
@vasusri88013 жыл бұрын
How to download free trial this with full keys,, please tell me about that
@CADandStuff3 жыл бұрын
You would have to contact the vendor about that
@vasusri88013 жыл бұрын
Hello sir how to get this software with free licenced keys.. Thank you