SETTING UP A COVIDIEN PB 980 MECHANICAL VENTILATOR Part 1: BASIC SETTINGS

Рет қаралды 40,496

6 жыл бұрын

So the pre use SST has been performed, so where do you find the the main screen to start programming the ventilator. In this video, George goes over the basic settings of the ventilator when choosing to ventilate a patient.

Пікірлер: 37

@amy84963 4 ай бұрын

Many thanks for all your video. I am back to ICU again after 4 years of being away from ICU, and I was almost forgot all about ventilator settings. Watching all your videos make my life easier in ICU.

@standardmayhem 3 жыл бұрын

Aw George! You were my instructor 20 years ago and you haven't changed (except age comes for us all.) Won't forget you yelling at me for sleeping in class.

@katybrennan8222 3 жыл бұрын

Cute Ventilator!!!! I love Ventilators!!!!!

@BayouChic 4 жыл бұрын

Thanks for sharing. Needed a quick in service & this was perfect.

@GeorgeORRT 4 жыл бұрын

Thanks. Hope all is well and that your safe on the Bayou

@janetgray3278 4 жыл бұрын

Great video George...it was helpful. I am not familiar with this vent.

@GeorgeORRT 4 жыл бұрын

Glad it was of help. The 980 has been around for a few years and is the replacement to the 840. Pretty much the same 840 vent features on a new and improved platform and display. They've incorporated more information on the screen which can make it a bit more cluttered when first using it.

@sinclair657 Жыл бұрын

Thank you

@alexyboiz 4 жыл бұрын

What if someone has breath holding or central apnea? Would you be able to click spontaneous time mode? What settings and numbers would you do for it to breathe comfortably like at a low pressure incase someone finds it hard to fall asleep.

@WillowWandering 2 жыл бұрын

Please do a video using the PB 980 that shows how to place a patient on an SBT trial and if they fail how to immediately place them back on previous settings. Thank you!

@gisellpacheco8422 4 жыл бұрын

Great video, question how would we change the vent from adult to peds or neonate?

@teddybear1154 2 жыл бұрын

That’s a good question I would try by IBW input. But we use Servo for our peds/neo population.

@shayne3165 3 жыл бұрын

I need to set up non invasive ventilation/bipap on a covid pt

@GurunathHari 2 жыл бұрын

is there a screen lock ...? to prevent inadvertent or unauthorized changes ...

@respiratorytherapist2051 4 жыл бұрын

Sir sorry for this out of topic inquiry. Which mode is near to the function of IPAP EPAP on resmed BiPAP S/T when using PB, is it NIV CPAP+PS or NIV SIMV-PC.

@GeorgeORRT 4 жыл бұрын

NIV CPAP + PS

@mshilton2373 3 жыл бұрын

Your insp time on these settings is .42?

@montadharaltaii7604 3 жыл бұрын

What's the damages of this ventilator please

@gabemarcus7926 3 жыл бұрын

So let me get this straight, there is a company called COVIDIEN that makes ventilators. Coincidence, I think not!

@aprilmartin3548 2 жыл бұрын

Would be great if this showed how to change it from adult to pediatric

@christmaszorro 2 жыл бұрын

So, were those settings good for an OD patient?

@lcortiz2653 5 жыл бұрын

Increasing the sensitivity on this ventilator will it make it hard or easier to trigger?

@GeorgeORRT 5 жыл бұрын

As you increase the sensitivity for both triggers (flow triggering and pressure triggering) it becomes harder for a patient to trigger a breath. This is specific to this ventilator.

@lcortiz2653 5 жыл бұрын

@@GeorgeORRT Thank you, I was told that the 840's trigger setting was different from the rest.

@GeorgeORRT 5 жыл бұрын

@@lcortiz2653 The Servo I is the one that is different . When it reverts into flow cycling, the higher the number the more sensitive it becomes and when you look at the number itself. To top it off, it's not even referencing an actual flow value. Still a great ventilator though.