It’s great. Go with Cetus pro then baby hawk 2 plus + simulator.

can you use the DJI controller 2 for non-DJI drones?

@@CheqkoO95 nope

​@@CheqkoO95You can as long as the drone your getting has a DJi 03 Air unit installed ...

It's made to carey a gopro

You don't have to build anything comes pre-built, but don't know what a pixhawk is but never needed anything like that, just a controller with ELRS or whatever you use. You can tune it in Beta Flight, it's pure manual.

I believe anything with a DJI o3 air unit

I wouldn't go higher than 1100mah 6S ... I use tattu 1050mah 6S and get 7 minutes of real flying , not just slow cruising

Yes, but if you spend few minutes to take it apart and make that usb-c hole in a prop guard frame a little bigger (it's soft plastic, sharp knife or file will do the trick) you will gain access to sdcard slot.

I have a Protek35 and yeap... its hard to fly inside 😳

Is it that bad for indoor? I want a cinewhoop for both indoors and outdoors but I think it just doesnt exist, or a 3inch like this should do?

@@joseluisrodriguezgarcia5582 im trying to decide the same right now.. I've been thinking cinelog35 but not sure if it will be too big for indoors

@@wmfbmp5743 I still hesitate haha

and not sure about the noise... seems like the 35 is really loud

Have a bunch of tattu 6s batteries, they are great and reliable

are you still having issues with this drone i was about to order one to add to the collection since i had the goggles and fpv controller is it not worth i??

​@@Dontcrapout I would avoid, the excuse they gave to me is that many of their techs have Covid, so perhaps who is assembling them are not knowledgeable enough. They told me to fix it myself or send back to them...yeas, send back to China on my dime ($65), they took 3 weeks to ship after getting my $600, just imagine sending it back on my dime and wait even more, I will completely disassemble and re assembly, my problem is time...hence why I got a PNP first place. Much easier and cheaper build it yourself, I am done dealing with Chinese direct. And PayPal was not help either on my claim, guess they are harboring Chinese vendors now, the next step I had to get a tracking number (shipping to back to China) what I don't want so the claim is worthless with them, reason way they only want to be paid with PP....PP gave me $60 as a courtesy for al older member.

@@RCREVIEWS101 that's very unfortunate that this was the customer service you received they sound like assholes.. all in all i personally have the DJI avata and the goggles 2 and the FPV 2 controller so i was searching for a nice little fpv drone that had DJI air unit 3 and was PNP so i could just use the goggles and controller i already owned. my dilemma is im in canada at the moment and cant find a reliable source to find a drone like that without having to wait weeks and weeks and even months for it to be delivered. also now that i hear what you said about your experience i dont know what to do i wanted this quad but now im second quessing myself. do you have any recommendations of any other drones that i should look into. thank you

​@@Dontcrapout Yes, I have the Avata as well and 6 other DJI drones and 12 planes. I do have a 3 years old GepRC Rocket lite that flies fine, my guess is the company went down hill with no quality control, testing or after sales support. They should assume when they sell a lemon and make it right, I for once will never buy anything from their brand. There are reports that the DJI Controller 2 having ranging problems with the O3, I will put a second Rx and use an old Taranis X9D with this set up. Best is not get the PNP if you will adventure yourself in getting one.

@@RCREVIEWS101 im kind of confused so if i have the dji controller 2 is it not good to get a 03 Air unit drone thats already built hence why you said PNP or is their a better route? i primarily have the controller and goggles from dji so i wanted to really fly with that

Go make videos