Gerber Armbar Vs Gerber Armbar Slim Drive Multitool showdown

Gerber Armbar Vs Gerber Armbar Slim Drive Multitool showdown - Table Top Review

Рет қаралды 39,900

Күн бұрын

Reviewing the Gerber Armbar Drive and Armbar Slim Drive Multitools. These are two really nice compact driver focused multitools. similar to the Victorianox Swiss Army knives these two multitools don't have pliers.
However with a locking blade and a driver similar to what is found on the Gerber Centerdrive with bit driver options this tool is really a notch above the completion at this size and price point.
Using the links below helps support the channel with a small commission if you decide to make a purchase, using the links helps us keep doing what we love to do!!
🛒Gerber Armbar Drive (Bigger one)
amzn.to/3suRY5B
🛒Gerber Armbar Slim Drive
amzn.to/3JfCYiA
✅✔✅ Check out our new website!!
www.GearsNTools.com.com
Interst in how we make our videos?
👀- GNT Studio Setup
Similar Vidos you might enjoy!
👀- Leatherman Wave +: • Leatherman Wave Plus U...
👀- Leatherman Charge +: • Leatherman Charge + G1...
👀- Leatherman Surge: • Leatherman NEW Surge R...
🎵Music Info:
Artist: Danijel Zambo
Song: Fly Away
Find It here: danijel-zambo.bandcamp.com/tr...
🎵Music Info:
Artist: Danijel Zambo
Song: Spring Time
Find It here: danijel-zambo.bandcamp.com/tr...
00:00 - Intro & Welcome to GearsNTool !!
00:57 - Size & Weight
02:26 - Driver
04:35 - Knife
05:40 - Other Tools
08:29 - Pros
09:26 - Cons
10:38 - Takeaway
#GearsNTools #Multitool #Gerber #Armbar #Gerberarmbar

Пікірлер: 49

@johngaskey218 Жыл бұрын

Just seeing this. I’ve had the arm bar drive for almost 2 years and it is invaluable for me in my day to day. The great thing about the driver is that it can be used as a stubby and get some solid torque on screws. I use the scissors everyday and have found that the scissors are more important for me and these are quite adequate for opening small plastic parts bags.

@fck20112012 Жыл бұрын

I put a small ziptie on my knife cutout to make a "thumbstud" for way easier one hand opening. Lol just a suggestion.

@chasingthetrail9375 2 жыл бұрын

Grabber armbar slim became my edc knife never looked back I also use it with a set of neiko nut driver adapters can fit there set of metric and standard nut drivers add in some double sided whia bits and you have a Extremely large capability set in a small package

@planetdee3587 Жыл бұрын

So I am just coming across these and they are on sale. Seeing the difference, I will buy the smaller one. I want to make a note that a few years back the only option for a bit screw driver was their drive multitool (forget the name) and was $80 bucks. So getting this feature at this price is amazing

@76ajc 2 жыл бұрын

😄 I used my Wave a few times for bit removal too. I've had the Armbar Drive for a week and really, really like it. The driver is lovely, I agree. Hard as it was for me to believe, the scissors were bested only by a pair of leatherman Raptors and a victorinox sd when cutting paracord. Micra, pioneer x, sog snippets, wave + couldn't cut as well. I don't like pocket clips so much, so I'm cool with the lack of, but you're right....it would've been a nice touch. Great concise review man!!

@kettchuk918 2 жыл бұрын

A shorter, non-locking blade with space for another bit would make this legal everywhere and more useful and a lock on the driver would reassure people.

@toolsgear2695 2 жыл бұрын

Great review!! 👍

@kahuna1247 Жыл бұрын

I have both and like them equally. Bought the slim by accident and realised only after it arrived! The Armbar lives in the pouch of my MTB, while the Slim on my desk.

@gearsNtools Жыл бұрын

Both are hardly little tools :)

@JoeLopez 6 ай бұрын

Great comparison. My Drive should be here today.

@kohort1 2 жыл бұрын

I find loose key rings especially that small make these tools cumbersome. I like a fixed tab with a hole, a clip or integrated carabineer works best. The whole idea for something this small is that it's with you always and quick to whip out. I have a Dime which takes mean few seconds to aim the ring onto a 'biner, while my Leatherman style is easier to engage.

@RobertJinks 2 жыл бұрын

I actually don't want a pocket clip, so this works great! People get skittish when they see you have a knife where I live.

@thepenultimateninja5797 4 ай бұрын

There is a knack to using the scissors. You have to apply slight outward pressure (to the left) with your thumb as you press the lever down. That sort of forces the blades together, and you can get very fine clean cuts. They aren't as nice as the scissors on a Victorinox SAK, but I think they are more durable. I have owned a number of Victorinox SAKs over the last 35 years, and the scissors are always the first thing to break, and they always break in the same place. To me, the Armbar Drive is the ultimate tool combination for my everyday use. Scissors, knife blade, bit driver. Perfect. I keep the Armbar in my pocket, and a Railer bit holder on my car keys that holds 5 double-sided bits. You can also store another double-sided bit under the scissors, so that's a total of 14 different drivers.

@joshfa5526 10 ай бұрын

Steel is 3cr for blade.

@mofuggly4303 2 жыл бұрын

Nice review

@gearsNtools 2 жыл бұрын

Thank you :). new camera setup, got some big things coming up for the channel!

@em4me-Dan Жыл бұрын

Hey Gerber! put a lock on the bit tool and better blade then maybe I will consider it.

@yanwaspful 2 жыл бұрын

Have you actually tried using the screw driver? When you push and turn, that twisting action is enough to collapse it. EDC'd this for 6 months before getting fed up with it. Great feature and size just bad implimentation.

@gearsNtools 2 жыл бұрын

I tightened a few things up with it. probably best not going to be the best tool for a large project. I like the form factor, but I agree a lock on the driver would've really been nice.

@pretentiousname01 2 жыл бұрын

@@gearsNtools a locking mechanism for the driver, and a pocket clip would have really elevated this tool.

@Merc399 2 жыл бұрын

Wish the slim drive kept the scissors and skipped the knife fr fr. I have a quality blade i keep on me as well as a leatherman wave+. If it was just the armbar and the scissors it would reduce reduncancy. As it sits I might as well keep my wave+ and centerdrive in my edc but id like to drop to the armbar drive + leatherman sidekick and then id have more weight available for extra bits and i could carry a little lightweight secondary plier set

@lorrainecouch348 Жыл бұрын

Mystery metal? Well... it leaves a mark on satin wall paint like my silver bracelet does... and silver is conductive... maybe for technology tendencies??? I did metal drawing on primed surfaces... I thought it was cool... pure silver leaves a good solid line as does lead... not that I used lead lol Copper that was good... soft copper. Apparently they used these wires like pencils in the olden days. Anyway one chap stated that there is a whistle on the armbar drive... so I tried it and it kinda works... Like blowing over a bottle... just cover the holes up.

@muffinpuffs3790 2 жыл бұрын

I heard rumors that Leatherman is moving their manufacturing process overseas (China). Do you know anything about it?

@gearsNtools 2 жыл бұрын

I haven’t heard that, and with the current supply chain environment that would be an od move. I’ll look into it and if true will make a video on it!

@bt1959 Жыл бұрын

they should have 90degree and full lock on the driver.

@gearsNtools 2 жыл бұрын

Gerber Armbar: amzn.to/3suRY5B Gerber Armbar Slim: amzn.to/3JfCYiA

@gopherstate777 2 жыл бұрын

If you compare this Armbar to a SAK that includes a pair of scissors then I think the Armbar sizes up very nice. While some would bemoan the lack of a locking mechanism on the Armbars driver, I say just bend the tool 90 and stop bitching. I find the SAK lack of a locking blade much more egregious and as to the ability of the hammer function, I think it is much more effective as a hammer fist self-defense tool. The design is nice and I added a clip but I have seen two different pocket clips for this by now. I also can add a second bit inside the device which makes it more functional. In a nutshell, I can see in an Urban Environment this device is more useful than a SAK.

@usmcheavyjunk 7 күн бұрын

Why is Orange more expensive than others.

@paulbelcher7059 Жыл бұрын

It's the lack of clip and none locking driver because i bet it will collapse now and again.

@masonrains5010 2 жыл бұрын

The steel gerber uses is 7cr. Pretty crappy steel if you ask me lol

@gearsNtools 2 жыл бұрын

where did you find the steel spec? would be interested to look into this. thanks for sharing!

@jayr526 Жыл бұрын

I have found statements on line that the blade is 5Cr15MoV.

@ChopperCharles Жыл бұрын

Another swing and a miss. No locking driver and no pocket clip means this is not a usable EDC.

@insanogeddon 2 жыл бұрын

Knife should open from the same direction as the other tools "Spydie Flick" style - a flat back to a knives handle is vital on a working blade and like Victorinox also KNOW a blade closer to the palm is best - on the outside it wants to rotate and gets amplified by a broomhandle design. Further (like all gerber cut out designs) one of the cutouts should have been an oxygen wrench.

@diezelle57 2 жыл бұрын

I confirm that the lack of locking of the bit holder is a problem because, obviously, during screwing, it is not always aligned with the screw head. The scissors are pathetic. Gerber now makes incredibly bad multi-tools.

@gearsNtools 2 жыл бұрын

I didn't find the drive to be problematic for light tasks. never really been a fan of scissors, hard to make them useful at this size.

@diezelle57 2 жыл бұрын

@@gearsNtools "light tasks" .... This series of multi-tools from Gerber are very bad, very low-end. Bibury or Splitman do much better. And nothing to do with the Free T models. No need to be complacent.

@gopherstate777 2 жыл бұрын

Big fan of your channel diezelle57.

@dannyboswell7188 Жыл бұрын

I gotta agree. Just looking at them scissors you can tell there junk. Never been a fan of gerber either. It’s always been between a Vic and leatherman for me

@thepenultimateninja5797 4 ай бұрын

I have used the bit driver on mine pretty extensively, and I've never felt that the slight offset made it difficult to use. It's not even really noticeable.