GERMAN ENGINEER explains ONI: COOL SLUSH Geyser and VOLCANO Tamer! Oxygen Not Included Spaced Out

No video

GERMAN ENGINEER explains ONI: COOL SLUSH Geyser and VOLCANO Tamer! Oxygen Not Included Spaced Out

Рет қаралды 20,083

Күн бұрын

BierTier explains EVERY VENT/GEYSER/VOLCANO!
I figured it is time to make my own version of every vent, geyser, and volcano tamer series. In Pt.6 we are going over the COOL SLUSH GEYSER, the COOL SALT SLUSH GEYSER, and the VULCANOS! Also, a little deep dive into Geysers, in general, is included! Watch now and let me know what you think... :)
SAVEFILE: bit.ly/SaveFil...
Sith515's Vulcano Tamer Guide on Reddit: / no_space_materials_mag...
As always, if you enjoy the video please give it a LIKE and subscribe to the BierTier - German Engineer channel, and enable notifications so you can be the first to know when a new video is released! Thanks!
------------------------------------------------------------------------------------
LINKS:
Join my channel to get access to perks and support me directly:
/ @biertier
Discord:
/ discord
Twitch:
/ biertierlive
Instagram:
/ biertiergermanengineer
Twitter:
/ _biertier_
Facebook:
/ biertier.engineer
------------------------------------------------------------------------------------
TIMESTAMPS:
00:00 Intro
00:50 COOL SLUSH GEYSER Tamer with SPOM
06:06 COOL SALT SLUSH GEYSER Tamer with SPOM (Full Activation Guide)
12:08 VULCANO TAMER with Cold Igneous Rock Extraction
15:54 Final Overview
------------------------------------------------------------------------------------
ABOUT OXYGEN NOT INCLUDED:
In the space-colony simulation game Oxygen Not Included you’ll find that scarcities of oxygen, warmth, and sustenance are constant threats to your colony's survival. Guide colonists through the perils of subterranean asteroid living and watch as their population grows until they're not simply surviving, but thriving...
Build Extensive Bases and Discover What it Takes to Survive:
Everything in your space colony is under your control, from excavation and resource allocation right down to plumbing and power systems. Resources will begin depleting with your first breath, however, so be sure to dig fast if you want to live.
Avoid Boiling with Thermodynamics:
Temperature control is a constant concern in space; too cold and you'll freeze, too hot and you'll fry. Keep tabs on ambient environmental temperatures and your colony's heat production to maintain a nice, cozy atmosphere for your colonists.
Enhance Efficiency through Complex Gas and Liquid Simulations:
Create interlocking pipe systems to swiftly deliver fuel and liquid to critical areas of your base. Plan well and be rewarded as your colony transforms into an imperishable, well-oiled machine.
Take Charge with Power Grid Simulations:
Choose from a multitude of power sources including coal, hydrogen, natural gas, or just plain old elbow grease. Manage power runoff, circuit overloads, and meltdowns to keep your colony running smoothly.
Support the creator and give it a try yourself:
store.steampow...
------------------------------------------------------------------------------------
Music provided by TheRelaxedMovement.
Check it out here: / therelaxedmovement
------------------------------------------------------------------------------------
#biertier #germanengineer #oxygennotincluded #oni #spacedout #engineering #german #indie

Пікірлер: 45

@BierTier 2 жыл бұрын

If you enjoy this video, find the entire "GERMAN ENGINEER explains ONI" series in this playlist: kzfaq.info/sun/PL4O-dC6ogdu_4sdMUXl_dgpntfQgoGDQ8

@YoursTruly78887 Жыл бұрын

Im so mad... I just spent so many cycles building the spom RIGHT NEXT TO a cool slush geyser, and then I find this video combinging them!

@zeroh_chill2966 10 ай бұрын

I just did this exact same thing 😭 Built the spom and then 100 cycles later i found a slush geyser not more than 30 tiles below it

@stevenhitt6954 2 жыл бұрын

When it comes to starting the rodriguez, I put a puff of hydrogen in the chamber with the electrolyzers first, it doesn't take much, then run the electrolyzers till they stop, then wait till the hydrogen settles to the top. The hydrogen chamber is then full right off the bat, and there is no need to vent the oxygen in the hydrogen line. It is an extra step, and really I only do it because I can.

@BierTier 2 жыл бұрын

That is definitely a way to do it if you want to make sure that no Hydrogen escapes, but I would call it unnecessary in almost all cases. But generally, as long as it works, it works :)

@rickymarumade Ай бұрын

many many thanks!

@joeschmoe7324 9 ай бұрын

I would recommend the dropper mod. It allows you to pluck 100g of liquid on the map and drop it into a cell. Pause move a dropper of water into each cell you wish the gas to be gone. When you remove the liquid from the cell it leaves a vacuum. When finished just unpause.

@macaronibob6839 2 жыл бұрын

Nice video! I want to try the volcano taming example you gave, but do you think this will also work with minor volcanos?

@BierTier 2 жыл бұрын

Thank you, I’m glad you enjoyed it! Yes, it does work with a minor volcano, in fact, the volcano in the video is minor. Just build up a decent supply before you turn it on and it should run forever without any issues. If you run low on magma just turn it off temporarily to refill it. No problems with that :)

@destwong Жыл бұрын

U also can move the hydrogen pump one tiles to help priming of the system faster.

@charlesrogers6382 2 жыл бұрын

How is the Desalinator Emptied in the Salt Slush Geyser Setup? I am assuming just a adding a liquid lock next to the Desalinator or building it just outside the Hydrogen Environment.

@BierTier 2 жыл бұрын

You are right, both options are viable. It’s mentioned twice in the video, at 6:24 and again at the end of the Cool Salt Slush Geyser segment. My solution would be to put a liquid lock right beside it. I would leave it in the Hydrogen Environment for easy cooling.

@Spoonwood 2 жыл бұрын

Your cool slush geyser and cool salt slush geysers probably wouldn't work on Rime or The Frozen Forest, since the input water would freeze in the pipes. At least not until those chambers are hot.

@BierTier 2 жыл бұрын

You are absolutely right. This can be negated with pumping whatever else hot one may have through the reservoir first and introducing heat, that’s why I built the basins so big, so there is space to cool something else off. It’s always good to use one thing for more than one purpose if possible :)

@YoursTruly78887 Жыл бұрын

On the first spom, since you're using a regular transformer on the right side, isn't the use of conductive wire pointless? Since you're already limited to 1Kw, why waste the refined metal on a 2Kw wire?

@YoursTruly78887 Жыл бұрын

Why does my build constantly have freezing pipes? (Full rod with slush geyser polluted)

@mikehanks 2 жыл бұрын

atleast a year ago, i did a different build with the magma volcano. sometimes the magma does make a tile in a mesh tile, very annoying. also how much petrol is on the ground? hot rock will flash it into sourgas?

@BierTier 2 жыл бұрын

I haven’t encountered the issue with the mesh tile, it’s because of the relatively small amount of magma that the door lets in. 0.8 seconds is the very maximum. 0.5 seconds is the minimum. There is one 200kg bottle over the floor. About 16kg on the left side of the room, a little less towards the right. I also didn’t have any sour gas issues, probably due to the high amount of steam pressure(at least 100kg of steam per tile). I have found it’s pretty stable, ran it for about 50 cycles before recording. That is in long game not very much, but it’s a baseline

@jemsterr 2 жыл бұрын

I know that petroleum used to be needed in steam rooms, but I'm not seeing it any more until now.. Is it really needed, or can you just dump a heap of water in?

@BierTier 2 жыл бұрын

In all honesty, I’m not sure. I figured it would help heat distribution beyond the Tempshift plates. I’m pretty sure it would work without, potentially with a bit less efficiency.

@burtjackson5261 2 жыл бұрын

I can never get the infinite gas storage right. the liquid always disappears. No matter what kind I've use. I tried at 15kg but again it will disappears or I put too much and it's overpressured.

@BierTier 2 жыл бұрын

It is a bit tricky to get it. I don't know if you are aware of my ONI Let's Play series, but I build several throughout it. Here for example I show in relatively great detail how to do it, maybe it helps you: kzfaq.info/get/bejne/bNl3qa9hrZeYm3k.html

@burtjackson5261 2 жыл бұрын

@@BierTier Thank you. I'll Check it out after I see this Infectious tamer. Great content.

@richard2mitchell 2 жыл бұрын

You could drop that hydrogen pump down one level now and it is still as effective he recently just tested that.

@BierTier 2 жыл бұрын

Good to know, I actually never tested that. Thanks!

@_Zeox Жыл бұрын

Question: you can make the output ignius rock more cooler than 30c? Or is the max low temperature you can archive?. Thanks again for your videos, I hope i can find a volcano in my base

@BierTier Жыл бұрын

I have honestly not tried to go lower, but it should be possible. If not like this, most definitely with a second thermo aquatuner which just cools down the cold box. With Polluted Water temperatures of around -15C should be possible. Again, that's a educated guess without actually trying it. In the description I provided the savefile if you want to tinker around with it yourself :)

@_Zeox Жыл бұрын

@@BierTier ty so much!

@BierTier Жыл бұрын

Anytime :)

@destwong Жыл бұрын

I will replace all the spom wire with heavy voltage wire and connect to main grid as it will produce more power then it's need .double as a self contain generator .if need to delete more heat , build it out of gold amalgam and just connect a normal water or salt water geyser and use a ice box to control the oxygen temperature.

@MrNecaKralj Жыл бұрын

Hey, how much water per tile did you put inside the steam room? or you imported steam from somewhere else? if you boiled the water here, need to know how much should I put. I always struggle with this. Appreciate the help!

@BierTier Жыл бұрын

It is extremely little. A few grams per Tile. Too much will cause the system to stall, but it needs to be enough to cover the entire floor for heat transfer at startup. Less then 500g per tile would be my recommendation

@MrNecaKralj Жыл бұрын

@@BierTier So, to do this out of sandbox mode, you would vacuum the steam room first, dump petrol as you shown in your video, and lastly, dump around 450g of water per tile on top of that?

@BierTier Жыл бұрын

You bring in the water first, then you build a liquid lock on one side, then close it off and vacuum it out. The below 500g per tile is only for the middle. In this video I build one from scratch in a real game, maybe that helps you out: kzfaq.info/get/bejne/iKqDnZuKrd_Qfps.html

@BierTier Жыл бұрын

I did put too much water in there in that video, but fixed it later before startup. I think I put 10kg or so in there originally, but mopping got the job done.

@bagboybrown Жыл бұрын

I'm just really bad at this game. But will the autosweeper feed sand to the sieve?

@BierTier Жыл бұрын

Nah, you are doing fine alone by trying it :) It is a steep learning curve, but you can do it!! The auto sweeper will feed the sieve, yes :)

@shadowphantom1873 2 жыл бұрын

Been some time now since my last comment, just came to say hi

@BierTier 2 жыл бұрын

Hello there and thank you :)

@leal.3044 Жыл бұрын

I tried to build the cool slush geysr setup on my vanilla map. Everything worked perfectly fine, until the water in the electrolyzers and the pipes that are running towards the elctrolyzers started freezing... Now there are blocks of ice in my closed up chamber and im kinda sad. Took me a long time to set everything up. Any thoughts on what i did wrong?

@jokecukie Жыл бұрын

What material did you use for the water pipes? They should be insulated pipes made out of igneous rock or better. Otherwise the water inside the pipe cools down too much and freezes, breaking the pipe.

@leal.3044 Жыл бұрын

Im pretty mid-end game. I used ceramic - thought when it works for tiles, it should work for pipes aswell. But I thing it freezes inside the elctrolyzers? The blocks of ice appear on top of them.

@jokecukie Жыл бұрын

@@leal.3044 I see. This shouldn't happen with ceramic insulated tiles. Are your electolyzers controlled via automation? Water stored inside the electrolyzer with a red signal could freeze and break

@leal.3044 Жыл бұрын

@@jokecukie They are, i figured it out. It seems like the setup had to warm up a bit. Im dumping heat from another Vent into the reservoir now and it works perfectly fine. Thanks for the help!

@jokecukie Жыл бұрын

@@leal.3044 Good job 👌