German Type VII R/C buildup in 1/32 scale

German Type VII R/C buildup in 1/32 scale - CH.6: PAINTING

Рет қаралды 88,031

Күн бұрын

The next chapter of the build log for my OTW German Type VII R/C model in 1/32 scale. This chapter focuses on the cosmetic aspect of the build with base paint, salt chipping, and weathering.
Once complete, this model will be fully functional, featuring working sound, ballast system, lighting and working torpedoes!

Пікірлер: 53

@jeremyknott9402 Жыл бұрын

detail....detail......good stuff.....

@michelhorler3034 9 жыл бұрын

best rc sub I've ever seen. Good job Bob

@TOPHAT1966GS 9 жыл бұрын

Beautiful build

@waynemcphail7825 3 жыл бұрын

Wow, truly realistic paint job!

@fernandomolano6651 5 жыл бұрын

Great job Bob. Clear and helpfull advises. Thank you very much..

@dealwolfstriked272 8 жыл бұрын

Amazing skillz!

@my3yorkies 8 жыл бұрын

Very impressive model and technique. Although I'm not into RC submarining, there are lots of good ideas for static modeling here. Congratulations on such a fine job! Subcribed.

@BrettBilbrey 9 жыл бұрын

What a beautiful model. I absolutely love it. And as always, stunning work. As wonderful as the U-boat is, I still love my Nautilus more. Bob, I still have not had time to repair the damage from FedEx shipping. And I have yet to see the iris working (it was damage in shipping). That said, I love, love, love your work. And I can highly recommend you to anyone that wants a quality model made for them. I can not tell you how much I love my Nautilus. A true work of art. And having seen the original 'hero' model used to make the movie, I think mine is a better model!!!! ;-) Bob you do amazing work. And I'm always impressed with your creative ways to solve problems (like the magnetic rudder for my Nautilus).

@annrine940 9 жыл бұрын

I have a mount fleet sir Lancelot. In 1:32 scale that took me three and a half winters to build, your sub and my boat would look spectacular on the water together.

@MatzeB111 7 жыл бұрын

You have a very nice garage :D

@spreadeagled5654 4 жыл бұрын

I have the same Disney Nautilus submarine prints you have on your wall too. 👍

@pierregillion8256 5 жыл бұрын

Bonsoir Il se trouve que j'ai le type VII-c Trumpeter au 1/48ième à monter et votre magnifique réalisation va beaucoup m'aider. Encore une fois,toutes mes félicitations.

@AlexandreKlafke20 5 жыл бұрын

Wunderbar!

@turbine35 4 жыл бұрын

Sieht klasse aus

@derekcheong6365 Жыл бұрын

Hi You can paint the base colors first and can apply semi wet flour on the dry paint. Then spray the second coat of paint over the whole aera'. The flour can be easy removed,

@RCSubGuy Жыл бұрын

I've done hair spray and tooth paste, but hadn't thought about flour. Thanks for the tip!

@DuckworthBF3 8 жыл бұрын

WOW!

@joekrebs964 3 жыл бұрын

May the model be sent back in time and insure German victory in ww2!!!!

@superbmediacontentcreator 8 жыл бұрын

Wondering where you are spraying paints and so forth to keep your garage/workspace so clean?Can you show us?

@brandonrodgers2479 8 жыл бұрын

So. many. tools! :D

@fredschundnickel3358 4 жыл бұрын

Super, Grüße aus Deutschland

@dickscratcher3040 7 жыл бұрын

Hairai jaipurai !

@paulalderson6920 7 жыл бұрын

Salt chipping or toothpaste? Which is the better technique for rust effects?

@anatolykorovyackovscky5243 6 жыл бұрын

Hello.Where to buy an electronic timer with a relay that you show for torpedoes in 1\32?

@garygordus4465 6 жыл бұрын

Bob, Is the periscope part of the antena?

@burtpanzer 8 жыл бұрын

Very impressive. I am wondering if I may ask, is this a full-time job, or work you do on the side? Sure would be a great way to make a living for someone with your talents.

@RCSubGuy 8 жыл бұрын

This is definitely a hobby, albeit one that takes up a lot of my time. I have a full time job that takes me out of my shop (and often the country)

@paulvanappeven3340 5 жыл бұрын

👍🏻

@confusedbird 9 жыл бұрын

Where do you get your ballast system?

@videogamefan1896 8 жыл бұрын

i'm just wondering how much would it cost to build one like that today?

@tomhugill9988 9 жыл бұрын

Hi Bob, I would give the hairspray technique a go, much easier than the salt technique and let's you chip were you want rather than were the salt is. Also it works even after the paint is dry

@RCSubGuy 9 жыл бұрын

Tom Hugill Tom, thanks for the advice. I think I'll do a combination of the two next time. The hairspray will work well for worn or even scratched paint, but for re-creating the 3D effect of bubbling rust, the salt can't be beat!

@justinriekhof3900 7 жыл бұрын

how long is the U boot?

@Pertemba40 7 жыл бұрын

Bob, how would you make a net cutter on the bow?

@RCSubGuy 7 жыл бұрын

Well. .. I would likely simply design it in 3d and print in hight strength ABS or HIPS plastic. For those without the necessary skills or hardware, simply tracing the profile onto brass stock and cutting with snips and shaping with a rotary tool works just fine, too!

@swiftWord 9 жыл бұрын

I stopped looking at the model, and started staring at the car.Talk about a distraction, what kind of car is that? ...oh yeah awesome U-boat.

@paulvanappeven3340 5 жыл бұрын

i think it is a lotus 😀

@hilfskreuzer-3365 8 жыл бұрын

Is that model a ready manufactured kit or did you make it from scratch

@RCSubGuy 8 жыл бұрын

the kit is available for purchase from my site at www.nautilusdrydocks.com

@WOLF-zt6ep 9 жыл бұрын

Hey! RCSubGuy im kinda new to all this and i was wondering if you could answer a few questions i have?

@falcononehottie 4 жыл бұрын

I have no idea to get rusty coat im Germany? 🤔

@aaronblair9583 7 жыл бұрын

have you heard of flicking on petroleum jelly with a toothbrush/ dabbing with a toothpick before painting? the paint doesn't cure above the Vaseline and you wipe it off after cure time....

@SansP3ur 8 жыл бұрын

Are you familiar with using hair spray as a weathering method?

@RCSubGuy 8 жыл бұрын

I am familiar with that process. With RC models that will see water, I wouldn't feel confident that the paint wouldn't lift from the model over time. For static models, it works very well!

@SansP3ur 8 жыл бұрын

Makes sense that you wouldn't want the weathering to continue after delivery to the customer.

@falkheinzel9288 3 жыл бұрын

Where can I find this building kit? Thx

@RCSubGuy 3 жыл бұрын

Available on my website at www.nautilusdrydocks.com

@hertzair1186 4 жыл бұрын

Whats the car under the cover?

@RCSubGuy 4 жыл бұрын

That was my 2004 Noble M12 3R (now sold)

@EMTBAFV 3 жыл бұрын

Both horrible ways better with a cheap hairspray or come of AK chipping fluids and AKs worn effects! There really the only one that will go through the airbrush that's not made from glycerin

@mattia.kujala481 3 жыл бұрын

Absolutely too much surface manipulation! Have you seen real WWII submarines on dock?

@RCSubGuy 3 жыл бұрын

You're speaking of weathering? You're telling me that a WW2 era uboat wouldn't be rusted and beat to hell after a months long patrol at sea? A "real" WWII sub at dock is ready to leave, not coming home. And I assume you're insinuating that you have seen a "real" WWIII submarine at dock, which is likely a museum boat, well cared for and kept pretty for the tourists. If you're a veteran of WWII and have seen a returning boat in person, then I am fully ready to stand corrected on the above. If not, well... I stand by my build. Besides. It's my model and I'll model it however I want. If you don't like it, build your own. ;)