Get MORE out of your Audio Interface with Digital IO

Рет қаралды 15,061

Ай бұрын

Check out the gear we're using (affiliate links)
sweetwater.sjv.io/5g5jDj
Book Consultations / Sessions
www.andrewmastersmusic.com
Galaxy 32: en.antelopeaudio.com/products...
Antelope Audio Interfaces: en.antelopeaudio.com/audio-in...
10% Discount Use Code: AndrewMasters10
Fady's Channel: / @fadygergis
Music City Acoustics:
www.musiccityacoustics.com/
Download the free input sheet:
www.andrewmastersmusic.com/in...
Learn what studio career might be best for you:
andrewmasterscourses.com/p/th...
Affiliate links from Sweetwater + Amazon
(support the channel by using them)
Studio desk / Racks:
Dangerfox 24u:sweetwater.sjv.io/3eRaky
Dangerfox Splitbay 16u: sweetwater.sjv.io/KjPGBv
Dangerfox Racks: sweetwater.sjv.io/DKqmWG
Drums and Equipment:
sweetwater.sjv.io/anK1Jq
Guitars, Amps and Pedals:
sweetwater.sjv.io/75ab9A
Studio Monitors:
sweetwater.sjv.io/jrRnDZ
Headphones:
sweetwater.sjv.io/5gjb6D
Microphones:
sweetwater.sjv.io/vND4Oy
Content Creator Gear:
sweetwater.sjv.io/GmDjA2
Mic Pres & Ouboard gear:
sweetwater.sjv.io/DKWbao
Keyboards and Controllers:
sweetwater.sjv.io/g1obzv
Studio Equipment and Accessories:
sweetwater.sjv.io/zNja1G
Side tables on wheels:
amzn.to/45qvvZy
#recording #recordingstudio #studiobuild #howtorecord #studiosetup #recordingsession #inthestudio #studiosession #homestudio #audioengineer #andrewmasters #epicstudio #barefootmonitors #mixing #mixing #studioconsole #mixer #hybridmixing #ssl

Пікірлер: 62

@G_Guestion Ай бұрын

Some in depth stuff. Thank you andrew!

@sekritskworl-sekrit_studios Ай бұрын

Fady is INCREDIBLE!!! Such a warm and generous guy.

@barefootsound9239 Ай бұрын

Congrats on the new digs. Looking forward to all of the goodness to come out of this studio and channel. Cheers

@robgracia509 Ай бұрын

awesome thank you for doing this andrew

@thegsalmon Ай бұрын

Sweetwater no longer stocks antelope because their past issues and support team were not able to solve issues that led to customers returning their products and sweetwater putting an end to their headache bc of customers

@DynamicRockers Ай бұрын

Good to know! thx

@GregWatkins_official Ай бұрын

I'm using the A32pro along with my RME UFX3. Both great units, and the A32pro is super simple to integrate. Great video!

@tomrogers2790 Ай бұрын

Hi Greg, I'm considering this setup as well but wondering how the conversion quality compares between RME and A32. Which conversion do you prefer first?

@GregWatkins_official Ай бұрын

@@tomrogers2790 I’m not an expert on conversion, lol. I chose the UFX3 as my main interface because of the Madi and ADAT flexibility, as well as the reputable AD/DA conversion. I then chose the A32pro for the compatibility to the RME (both are owned by same company). So the A32 handles the conversion for all external I/O. I takes a while to grasp or understand RME’s Total Mix software, but once yo do…it’s awesome. Plus with this setup, there’s no need for external patchbays, since Total Mix handles both the RME and Ferrofish routing. Hope this was helpful.

@braxal6983 Ай бұрын

@@tomrogers2790 I have the same exact setup I am using a RME UFX III and a new black face Ferrofish A32pro that I took nearly 10 + months deciding to buy or not. So far I am very happy. I did consider the Antelope Galaxy series but I read many reviews that were very negative on the company and I wanted something very solid so I went with the RME UFX III and the Ferrofish A32pro. I may not be correct about the Antelope but I had to come to some conclusion and the Antelope reviews I read were not good. RME has a record for being rock solid according to what I researched.

@jigilous Ай бұрын

Yes but what type of box do I put them in when packing?

@MePeterNicholls Ай бұрын

What you packin?

@dronbana Ай бұрын

@@MePeterNichollsprobably that Antelope 😂

@AndrewCCM Ай бұрын

I got my gear prior to the ufx3 and A32 release. I use the RME UFX+ and FerroFish Pulse 16 via Madi. Very happy with it.

@jimmyrigs Ай бұрын

I just picked up an A32 pro in conjunction with my RME UFX plus. It’s been a huge addition to my studio.

@braxal6983 Ай бұрын

I got the same set up but I am using a RME UFX III

@braxal6983 Ай бұрын

What I do not understand is why Andrew is using a BNC cable. I have mine hooked up with only a Madi cable and it works fine no issues.

@jimmyrigs Ай бұрын

@@braxal6983 yeah same here 🤷🏻‍♂️

@lubomirn Ай бұрын

Great Video!

@acimbobby Ай бұрын

great explanation, very clear. It will rain though.

@DrayClay Ай бұрын

Awesome video

@HalcyonGuitars Ай бұрын

What’s with having to move so often?

@trentondurham7670 Ай бұрын

He’s in witness protection after helping to take down a global drug cartel. It was in a previous episode.

@HalcyonGuitars Ай бұрын

@@trentondurham7670 Jeez, ya miss one episode…

@hiphop3sree3 Ай бұрын

so what happened to your UADs

@Ted_Swayinghill Ай бұрын

How many I/Os does the control room doggo take? Will snacks and pets do?

@palsheldon6520 Ай бұрын

You probably need to treat that vaulted part in the contole room, you can hear it ringing in this audio ...Should be straight ahead. ;)

@tonycarpenter-Makzimia Ай бұрын

I used to have a Antelope Orion 32 and RME HDSPe MADI card, the only way to go if you can afford it.

@SuperMBARutgers2013 Ай бұрын

What dual keyboard stand is that @ 0:10 ? Also, does the ADAT add any latency beyond what the Galaxy interface has?

@braxal6983 Ай бұрын

I am curious why you need to hook up the BNC cable? When I hook up my Ferrofish A32pro using the Madi cable to the RME UFX III it syncs up no problem.

@braxal6983 Ай бұрын

Ok, I think I found the answer to why Andrew is using the BNC cable because the Antelope does not provide the clocking information in the Madi cable the RME UFX III does so RME interfaces with Madi do not need the BNC cable where as the Antelope does. You can use a BNC cable to with the RME but it is not needed for Madi.

@ScantlessBeatz Ай бұрын

Andrew so question, When will you be moving into your new space after this?

@ScantlessBeatz Ай бұрын

Lol😂😮

@SMOOTHFUNKYONE Ай бұрын

Thanks for sharing, What do you plug all your mics and line instruments into?

@itsstudiotime Ай бұрын

XLRs go to stage boxes, 1/4 go to DI boxes then stage boxes. This is standard for commercial studios using outboard preamps / equipment with patch bays.

@arianamastersofficial Ай бұрын

Love the tips!

@beatlurch5252 Ай бұрын

are you familiar with dante? What are your thoughts on that? when ill start a studio, i'll probably get a pure dante interface with 128 or 256 dante IO, skip the patchbay and just go with dante converters (or dante cards in case of something like the neve 1073opx). If i'd have multiple rooms, i'd only have to connect them via ethernet cables - plus doing live stuff would be viable

@chrissiemilnarskii Ай бұрын

Andrew! Curious as to how you’re routing those remote computer setups from the drum room to the control room. You mentioned Ethernet, but is there a software aspect/anything additional involved to get it setup? I’ve never heard of a mouse/keyboard with anything other than USB ports (which I know can be limited in terms of how long those cables can run). Thanks!

@itsstudiotime Ай бұрын

Hey, are you talking about the IG reel I did on the setup?

@chrissiemilnarskii Ай бұрын

@@itsstudiotime hey, thanks for the reply! Didn’t know you put up a reel/had an IG! Yes this is exactly the answer I was looking for, just followed you on there now too 😊 Thanks so much!

@matthewwhitaker4849 Ай бұрын

currently trying to decide between this setup or the Galaxy 64 interface... either way, I do need 64 channels to go to my computer as well. Curious what made you choose to go with the setup you have now vs the Galaxy 64?

@jkasko7 Ай бұрын

I have the Galaxy 64 and it is great. If you are an HDX user, I would choose that over the Galaxy 32 and the Ferrofish.

@sekritskworl-sekrit_studios Ай бұрын

If you are conecting via MADI, why are you also using BNC cables? (Honest question)

@PaulJSchaedig Ай бұрын

I wondered that too, MADI also can carry clock info, just have to set the ferrofish Clock source as MADI.

@zakaroonetwork777 Ай бұрын

1:11 Make it a Reverb Chamber. Break up the waves with some Angled Epoxy coated Plywood panels.

@andrewharms9435 Ай бұрын

I don’t see the link for your friend’s KZfaq channel. Could you link it?

@brand_music_records Ай бұрын

kzfaq.info/love/quO3dEu6dOedQBeTf9fefA

@itsstudiotime Ай бұрын

yes thank you! www.youtube.com/@fadygergis

@FransvandenBergeMuziekschuur Ай бұрын

Will the latency be the same at 32 channel input recording? I mean that's the real test. And to be able to provide latency free headphone signals.

@itsstudiotime Ай бұрын

Yep no latency issues, automatic delay compensation on hardware inserts and direct monitoring via galaxy.

@FransvandenBergeMuziekschuur Ай бұрын

@@itsstudiotime Good to hear. Looks great. Hope you will get lots of customers.

@gtk_NO Ай бұрын

@@itsstudiotime What would the benefits/differences be with connecting the Galaxy via a HDX card vs Thunderbolt? Wouldn't the usage of the Ferrofish channels as Pro Tools hardware inserts have a different sample delay because of MADI and perhaps a different internal sample delay on the Ferrofish compared to the Galaxy channels? Is the compensation for both the internal Galaxy channels and the Ferrofish added channels handled transparently in the background or differ with or without the use of a HDX card? I wonder about the same thing if you add any ADAT expander to any interface, how does the main interface know the specific internal sample delay any random ADAT expander has?

@themaccasboy Ай бұрын

Why are most interfaces still 24bit?

@roncoleman5007 Ай бұрын

A32 pro👍. One correction for you. The A32 is not an audio interface. It cannot be used standalone. It requires an interface such as your galaxy or a device such as the rme madface usb.