get the mist out. Condensation in Double Glazing, get the fog out

Рет қаралды 2,035,769

12 жыл бұрын

Re-Engineering failed double glazed units, Specialist Anti-Fog coating applied to the inside of the unit prevents moisture in the air condensing on the glass, also specialist sealer reseals the bottom of the unit to prevent water ingress from the bottom rebate should there be a problem with the window drainage or seals. No effect on the units thermal performance (tests carried out and verified by UK University).

Пікірлер: 20

@rosskesava 12 жыл бұрын

What tests and by what university? I would think it important to mention those simple few facts.

@enigma7070 7 жыл бұрын

Since the window seal is broken allowing moisture to enter, wouldn't this be a temporary fix?

@xjr328 7 жыл бұрын

Hi, We allow air to flow through the unit exactly the same way cavity walls and floors are vented to stop the build of moisture, the anti-fog coating prevents any moisture forming on the glass.

@tonyaulalo2040 7 жыл бұрын

Why not just change the glass unit all together? Obviously isn't good if it's fogging up??

@xjr328 7 жыл бұрын

After the unit has been vented using our system the unit can never fog up again, installing a new unit with a life of less than eight years (Average) is only a temporary fix....... Why has the unit failed in the first place? Is installing a new unit going to fix the problem long term ?

@gr8deals2do 7 жыл бұрын

wow...

@DinkAround 10 жыл бұрын

Where could one get the equipment to do the same thing. Such as the pump and plugs used. Also what chemical is used in the windows. Thanks

@MytradeTv 9 жыл бұрын

Good guide. Thanks chaps.

@Passionofthetaint 9 жыл бұрын

Great help! Thanks! Who did this song?

@xjr328 9 жыл бұрын

Passionofthetaint Sorry don't know!

@thepaulhowell 8 жыл бұрын

+Passionofthetaint Song is Permafrost by Danosongs

@xjr328 10 жыл бұрын

Thermal Insulation testing. Wolverhampton University UK

@alrewas5237 9 жыл бұрын

My window has streak marks on the insides of the glass, presumably where moisture has dried. How can I clean this, before using your treatment? or would the treatment in itself clean it?

@xjr328 9 жыл бұрын

alrewas 52 Hi There is no way of removing white streaks. if the marks are clear in colour they normally come out.

@margritelliott6190 8 жыл бұрын

Many thanks for your good advice.

@xjr328 11 жыл бұрын

Both sheets are coated using the spray tip, Laminated glass can be drilled in the same way as annealed. more info at our website

@katkat676 7 жыл бұрын

how much it will cost to have this procedure done?

@xjr328 7 жыл бұрын

Hi, We sell the kits and equipment to carry out the work yourself (DIY) kits start at £210 and repair 12 units, after buying the kit its just £5 per unit..

@maz5148 7 жыл бұрын

iIloved THIS! It makes COMPLETE sense! May be one of few KZfaq DIYs that I didn't have to go back and repeat a few times...AND not ONE WORD spoken. So excited to contact you and get started on these windows! Love it! Thank You. I'll be in touch.

@xjr328 10 жыл бұрын

At our website getthemistout