Zeroing thru your phone is even easier as u can measure the distance and make the adjustment in the phone and it’s bang on next shot

Ive got more testing to do but so far looks like the ballistic calculator is doing good. Have got 243 and 223 zerod at 100m, had a fox with the 243 at 230m using the bc, had a rabbit since with the 223 at 216m, i know not big drops involved but 4-5". Shot standing using tripod so far enough considering. Next to try it on a 22lr where if successful will be a very valuable tool. For me the lrf box snd splash are a fair bit lower than the centre of reticle but i can see it on 3.5 and 7 mag, and just about on bottom of screen at 14, im ok with that, you get used to it and its a lot more convenient than using picatinny lrf external to the scope. I find it easier to range at say 7 mag anyway then zoom in further to shoot if needs be. *If i was being fussy, it would be nice to also have a user selectable stepped magnification group. *Could be possible in a firmware upgrade i suppose So i could choose likes of 3.5 - 7- 12 - 16 for example.

verry good and informative video

I’ve got that scope on a sub12 Airgun currently. I’ve input data and BC is way off at short ranges (obvs LRF won’t work at less than 10m. My chrono FX is showing average of 229ms which it says is only 10.8 ft lb so suspect this is wrong (does an FX chrono work through barrel shroud?) Do you know if rise/drop can be input manually into the BC function. In other words you input a range of holdovers/unders to move the secondary ret to whatever the range is?

I,v got this on my sub 12, set at 30 yards, got all the ballistics in, perfect at anything under the 30 yards, down to 10 obviously, when I range out past 30 the second cross doesn’t move, just stays on point of aim, won’t move no matter what range I try, am I doing something wrong, cheers

My LRF aiming box is at the bottom of the screen is there any way to adjust the LRF box to position higher nearer to the cross ?

What is the white square box to the right below the centre of the cross hairs?

Why is your LRF box in the 5 o’clock position and mine is in the 7 o’clock position? Is there any way to adjust the box in the screen? As when I zoom in? It disappears off the bottom left of the picture.

Even easier if you zoom first then freeze frame.

Is the new Hikmicro Alplex lrf better than the new Pard ds 35? I’m really struggling to make a decision here…

So with the laser splash can this not be zeroed to the laser box in the same way as you can zero the laser on the ATN ABL ?

why didnt the have the ballisic setting in feet per second as most boxes give that not meters per second

Has that alpex scoped mark ,mine has 😂😂😂

also mine shoots high its zero,d at 100 yds 120 its shooting high surely the could have got it working correc tly b4 putting it on sale

I stick to my sytong HT60 .. for my pcp rifle ..30 meter's ..Why ??look at the clip ..and the comment's.we talk about a 1000 euro scope mine cost 350 euro .and it is no upgrade at all ?ore am i wrong ?All the bc talk ..I know my scope ..10 meter's ..25 meter's and 30 meter's what is the fuzz about .for pcp shooter's

they say its accurate to 1 meter from 1000 meters shame its not accurate at normal hunting ranges shame a good scope but needed sorting out right before going on sale

could u copy the audio next time and make a 2nd track to make fake monno instead of right ear only

Daytime image is not brilliant, really laggy and blocky.