Getting Better OEM Fitment. Cleaning and Fitting the String Theory 21.5mm Wheel Spacers

Рет қаралды 3,627

Жыл бұрын

Today we fit a new modification to the GR Yaris. We fit the String Theory 21.5mm Wheel Spacers. These are designed for the stock OEM wheels to space them out into the arches for a more aggressive fitment. At the same time we clean and ceramic seal the wheels while they are off the car! Enjoy.
Spacers for sale:
stringtheorygarage.com/produc...
Music:
Arthur Vyncke - The Missing Connection" is under a Creative Commons (CC BY-SA 3.0) license.
creativecommons.org/licenses/...
/ arthurvost
My Setup:
Base Playstation 5:
Base Xbox 1 500Gb
Elgato 4K 60 Pro
www.amazon.co.uk/Capture-Pass...
Headset:
amzn.to/2OYEACJ
Wheel:
Logitech G29 Standard with shifter.
amzn.to/2UuzTpl
GT Omega Pro Racing Simulator Cockpit
amzn.to/2I3dedF
My Car:
2021 Toyota GR Yaris
Garage Whifbitz OPF Back Exhaust
MST Performance Intake
Maxton Spoiler Cap
Automotive Passion Carbon Arch Guards
Automotive Passion Carbon Front Splitter
Automotive Passion Carbon Side Skirts
Automotive Passion Carbon Engine Cover
Rear LED Number Plate Lights
Tegiwa GoPro Mount
TheFogLightGuy Purple Fog Light Covers
Shoes:
Adidas XLT Kart Boots in gold and black.
www.demon-tweeks.com/uk/adida...
Gloves:
Adidas XLT Kart Gloves in gold and black.
www.demon-tweeks.com/uk/adida...
All Edited on MacBook Pro with Final Cut Pro and Shot on iPhone

Пікірлер: 29

@newkurosawa Жыл бұрын

Subscribed. Some nice tips there. I have spacers on my M4, they look great. Makes the car look that bit more aggressive. Will need to get a set for my Yaris. Thanks for link.

@FaithlessEmoRacing Жыл бұрын

thank you for the support! if you get the string theory spacers from their website then join www.gr-zoo.com and you get a 10% discount!

@Cernunn0s90 Жыл бұрын

Been eyeing these spacers for a while! Thanks for doing a video on them! Would love to hear your impressions on how/if it affects the driving dynamics of the car :)

@FaithlessEmoRacing Жыл бұрын

I have to say I can feel very little difference. Maybe alittle heavier on the steering feel. But not much in it. Great product. Veryyyy well made. And looks soooo much better now too!

@michaelanderson2689 Жыл бұрын

Tip use a hockey puck or cloth between jack and the sill to avoid long term damage to the sill! If you’d drive the car on some wood this would lift the car, so you can get your jack to the centre jack point on the front.

@FaithlessEmoRacing Жыл бұрын

Great idea. I did look at a hockey puck and had to order one as couldn’t find one local.

@philevo400 Жыл бұрын

Looks loads better😎...dont mean to be a smart arse but... The nuts attaching the spacer to the hub should be 103nm...not 115. 103nm is max for the standard studs. The string theory threads are 115nm.👍🏼

@FaithlessEmoRacing Жыл бұрын

It does look a lot better! I have just checked the instructions in the package and they do say the spacer nuts to 115nm and then the wheel to 103nm. 3:54. I will reach out to String Theory and double check though!

@philevo400 Жыл бұрын

@@FaithlessEmoRacing very wierd.... As the standard studs are known to snap.. Standard nuts to standard studs is 103. As 103nm is what the standard studs can take. But yes mate.. Check. 👍🏼

@philevo400 Жыл бұрын

@@FaithlessEmoRacing unless the 115 figure is for the new nuts.. But it should be all about the stud.... I don't see why it should increase the nm on a standard stud which is 103nm max from Toyota.

@stefankiney1625 9 ай бұрын

What about the bearings with those spacers ? I ordered to you mudflaps with logo, so great !!!

@FaithlessEmoRacing 9 ай бұрын

A lot of cars do run spacers including race cars. Yes there would be abit more load, but nothing too much!

@peterfalt3361 Жыл бұрын

looking good. like the how you do it videos. next step a new wing ;). only complain is from my cat that your cat is not in every video :)

@FaithlessEmoRacing Жыл бұрын

I’ll try and make sure she is in the next one!

@yhl6879 Жыл бұрын

Hi there, great video. Quick question, with extra 21.5mm poke out via spacer, does the wheel scrub the wheel arches at all?

@FaithlessEmoRacing Жыл бұрын

No rubbing at all. Im not lowered and on the standard Circuit Pack suspension and no issues at all!

@yhl6879 Жыл бұрын

@@FaithlessEmoRacing That is amazing thank you sir!

@steffydog 11 ай бұрын

Hiya, no mention of an alignment, did or does it need one after changing the spacer. Thanks.

@FaithlessEmoRacing 11 ай бұрын

I checked this with the alignment place i went in the next videos. They said that wheel spacers wont change alignment. They will change geometry like scrub radius but not the alignment.

@darrenprior6339 Жыл бұрын

Looks good. Curious to know....do spacers add to unsprung weight?

@FaithlessEmoRacing Жыл бұрын

yes they do add to unsprung weight.

@Flysohigh18 6 ай бұрын

Hey, its hard to see on video, but how aligned are wheels with arch. Do they stick out few mm or completly aligned? Im looking to buy them, but could run into legal issues if they poke out due to pedestrian safety regulations..

@FaithlessEmoRacing 6 ай бұрын

If you’re using them with the stock wheels then they don’t poke out from the arches at all.

@Flysohigh18 6 ай бұрын

@@FaithlessEmoRacing thanks! Should have no problem homologating it then.

@jeffmuir6994 5 ай бұрын

Apologies, I have only just seen this video. I’m looking to install similar wheel spacers to my GR Yaris down here in Australia. A supplier here has similar spec spacers at 21.5mm, however they also offer 23.5 & 25mm for the rear only. I see that you have since moved on from the factory BBS wheels, however can you recall if there was still sufficient space at the rear to accommodate additional spacing at either 23.5 or 25mm. Thanks in advance.

@FaithlessEmoRacing 5 ай бұрын

On the stock wheel you can get a couple more mm’s more poke. Should be ok, but then you maybe able to see more of the wheel poke out from above, that’s sometimes not legal in some countries.

@remyche8768 Ай бұрын

Yep, iv been looking at "mode auto concepts" I think. 21.5mm front 25mm rear for aggressive fitment