Jesse Cordell thanks!

@@johndowe7003 Interesting mental image...

Try Andrew Camatara channel. fixing old gear is his whole life!

@@andrewsobek2386 i watch his stuff. I got some videos as well but i lost my tripod :(

YES I AGREE.

John Doe thanks!

Gliderider It’s never too late...lol. Welcome and thanks for subscribing!

We’ll see! I’ll try to get my 941 over there this weekend and pull it out.

John Erway lol..., yeah, you can always count on them to come through with a comment or two!

926Trucker thanks!

Bruce Collins the wrecker has been sitting awhile, but I’ll get it back on the road soon! Thanks!

Love the way you just walked in the woods and save that old girl !

They were too tired.

Maybe because it's a split rim they need to put it in a cage to air it up.

Im pretty sure they could have fixed it by that house where it was sitting also, Sounds to me like they wanted him to tear the tire up with all the moving around ,so they could sell him a tire also.

Wilson Bobcat service most definitely! Both are well worth the ‘small’ price and effort

Shakes 73 yeah, but it worked out ok. It was far cheaper to take it to their shop than to have them repair it in the field.

Looking for a bellhousing for Allis Chalmers 940 wheel loader when a 2900 engine would you know where I can find a heavy equipment dealer that may have one thank you

@@billjunking_fool5549 Not right off but a junk yard or equipment salvage outfit might.

If you like fiat allis you must have heard of fiatagri. Made great tractors. So good they came out with a limited edition model.

@@ferguson20diesel49 I haven't but I was in the grading part of it but if they made it, it was a dandy to be sure and too much power for the unwary!

Lewie McNeely absolutely great machines. Unfortunately out of production too. The limited edition model goes for huge money at auctions here. Fiatallis didn’t take off here. Only a few odd ball excavators knocking around.

probably they don t want to pay the bank loans with those equipments....

Joseph Johnson welcome! Thanks for subscribing

he gaind another dislike from me....

yes take the weight off the front tire and go in reverse.

I paid $3k for both machines

dougslittlediesel yes, I got the T-500 out of there. And, got it running too. Now, I just need to replace all the hydraulic lines to get the galion operational

RJ 1999 the original motor in this loader has been swapped out with a John Deere motor. Looks and runs like it has relatively low hours on it too.

@@HammaDownEnterprises that's a shame, the Allis Chalmers was a better motor! But still a great loader

@SLHawk92 A John Deere motor in the 545b.That explains why I heard the turocharger whistling.The 645m that I operated while in the army, it's turbocharger didn't whistle.

@@robertunderwood6984 545 should have had a turbo, but if it was a military unit, God only knows how they speced it. I have a 745 B I bought from the Air Force, the military spec says it lifts 12,000# in the real world it lifts 30,000+ like nothing

@SLHawk92 Great video.I'm looking forward to seeing what you're going the do with the grader.What make and model is the grade?Keep up the good work,Buddy.God bless you.

I agree. Also, you could've just dropped the bucket to raise the front off the ground and pulled the wheel off yourself, and then taken it to whoever to fix. Then the reverse to put it on. That tyre will be trashed now, driving it with that weight on it...the side wall will be cracked and trashed. 😒

Clearly you didn’t read my intro. I put in new batteries, changed the fuel, and added new fuel. I don’t know if these machines had been there 10 weeks, 10 months, or 10 years. But, I can tell you they had been sitting more than 10 days...

@@HammaDownEnterprises ok it would have been nice to view some of it. In the youtube world we show alot of step. Nice machine though.

yeah, I though about that too...(after the fact!!)

мастер на все руки US. Not sure why they were abandoned.

Cliff P he just vapor locked it with the ether. Fortunately, no damage...

don't let the video fool ya, some effort and money went into getting it out of there. And, those tires won't be cheap either. Plus, the grader aint out the woods yet!!

Bobcat Legend you know, there are some things I figured could go without having to be said... this was one of them. Yes, I checked the oil level.

Bobcat Legend i checked the coolant level too, btw.

Bobcat Legend oh yeah, and the air filter!

You should film all the little details like checking the oil and air filter

Or people will make assumptions. Lol

Rick Atkins practically none. I changed the filter, added some new fuel, put in 2 new batteries, checked the oil, and she fired right up!

James Chester yes. Check my page for the videos. I still have some work to do on it before it’s fully operational (1 flat tire, corroded hydraulic lines...). But, it’s running!!

CarPhonix CarAudio I put in new batteries and turned the key...

😂🤣😂🤣😂

Yep! kzfaq.info/get/bejne/eb-Tqq-KvdW0knk.html

Top

have you tried Vander Haag's - www.vanderhaags.com/Search-Results.php?keywordsearch=545b

No estoy seguro de dónde se fabricó este cargador. Pero, el motor tiene una etiqueta John Deere y un número de serie del motor. Entonces, estoy bastante seguro de que es un Deere :-)

@@HammaDownEnterprises es muy diferente el sonido del motor de un jhon deere pero si esta la serie y la marca.no voy a dudarlo..por lo general tanto jhon deere como allis challmers usan una bomba inyectora rotativa lo que los hace mas ruidosos en cambio fiat tiene un equipo de inyeccion lineal lo que hace el sonido mas sereno y armonioso..

@@victoribarra3023 Okay. No estoy muy familiarizado con los diésel Allis Chalmers. Mi abuelo tenía un viejo tractor Allis Chalmers a gasolina cuando era niño. ¡Fue un buen tractor y divertido de conducir!

hmmmmm no.

AustriaGamed uuummmmmm you obviously know nothing and is under that American idea of it beat crap cause it’s European. They were and still are unbelievable machines. Last forever I know of a 110.90 model with nearly 30,000hrs. They came out with a limited edition model for us in the Celtic tiger and it no amount of money will buy one today. Collectors items.

@@ferguson20diesel49 what you dumb fuck?

Not those tires ..if the tire isnt broken loose from the rim and wont hold air athe o ring located behind the lock ring needs to be replaced if thats leaking all the green goo and stop leak in the stores wont stop it from leaking intil that oring is replaced

G POWER DRAGON it was the parking brake

For one, I'm not trying to wrestle with that heavy tire unless I have too. And two, on a dry day, your spinning tires and trying to navigate around bushes and over trees just to get to the machines. After even a little rain, getting back there is out of the question. As it is, I got my truck stuck trying to get back there a couple of days after some rain. It's 4 wheel drive and I wasn't too far off the driveway and buried to the axles. I'm not even too upset at the tire shop for not want to change it on site. At least he came out to look at it. Their service truck would've have been buried to the chassis and nobody's trying to drag tools all the way around the house. There's a reason I don't back the dump truck and trailer off the street. Sure, there's several ways that tire could have been changed. Heck, it might have just been a faulty stem. (And, yes, I've already kicked myself for not checking that). Bottomline, I decided it was safer and more efficient to drive it out of the woods and take it to the shop for a new tire.

Onde você está localizado?

I'll give 5000

While I appreciate all the comments on not fixing the flat tire, I got my reasons for doing what I did. Thanks for all the could ofs, would ofs, and should ofs. Bottomline- I had to move the machine from its location. A new tire, was a small price to pay. As a matter of fact, I'm going replace the other three tires too!

It was a lot, but not quite that much...

They came out, but said they couldn't fix it where it was at and that the tire itself was no more good. So after that, yeah, i drove it up on the trailer and took it to the shop!

Sun shine slade ok. I’ll take that into consideration for the next one. Thanks for the feedback.