I miss the farm, and YES all that hard work, I'm 80 years old now, I see all the new style of equipment, of today's farming, the times, of the modern farming sure has improved, The old saying, you gotta have bad, to appreciate the good.

I really enjoy your videos. Love the square bailing process. I hauled hay one summer when I was 15 years old. My friend Ronny had an old truck with a wooden flatbed built onto it. We could load 50 bails onto the truck’s flat bed. . Each of us made got a penny a bail. The truck had a granny gear. We tied a rope to the steering wheel and put the truck in granny gear. We tossed bails until one of us had to start stacking. The person on the ground would adjust the steering wheel occasionally. We did hay hauling all summer. One day a farmer drove out in the hayfield to get us to help him get some alfalfa bails put up before they got rained on. He paid us two cents a bail each. We helped get his hay put up in the hay barn and then went back to our original field. It never did rain that day. Ronny sold his truck for $150 at the end of our summer break. The truck leaked water and was not licensed. The truck did not have doors on it, nor seat belts. Neither of us had a drivers license. We decided we had pushed our luck far enough driving the back roads. Plus, we did not want to haul any more hay after that hot summer.

Thanks for sharing. We had our hay baled in Franklin Massachusetts back in the 80s and I loved watching Mr. Phelan and Mr. Foley cut and bale the hay. We had 7 acres of Timothy, Alfalfa, and Clover. Usually would make around 500-600 bales. We would stack it up on trailers and put it up in the hay loft and it smelt so sweet! Brings back some great memories as a kid 👍

That brings back a lot of memories from the farm!!!

We put up about 65,000 small bales a year. We use to us an accumulator like what you got. We now use a New Holland self propelled bale wagon. With the bale wagon we sure get the hay off the field and in the stack a lot faster than we use to. We put up about double in 3x4's I hope to get a stack wagon for them one day. Thanks for your videos my family and I sure enjoy them.

Yea I got my use out of it, my farming days are long gone so love watching your videos

Good to see someone still making square bales!

Always was my fave time of the year, I used to bale small bales too and started out with New holland and progressed up to a Welger , great times.

Great Video 👍 Brings back memories from my teens, the Bailer had a Sledge behind it with a fella making a 7 ‐ 9 stack on it then just gave it a nudge off, then loading the Trailers with a Pitch fork, certainly built your muscles up 💪

Nice job & really nice looking bales. Thanks for sharing all the different camera positions showing your equipment at work.

Great video, I used to throw a lot of hay back in the 70s,.....in Ohio. I would always be the one guy ,...behind the baler ,....stacking the wagon ,.....six high ,...a tie ,...and the sky! I miss those times, I would love to go back and do it again , they would need an ambulance at the end of the field.

Nice one man! Love my BC5060, don’t care what anyone says, it’s a mighty fine baler. Looks like it munched them big windrows.

I used to do all my own hay from cutting to raking to baling for my own use with horses, cows and goats and sheep. The equipment I used was 'old'. Had 2 tractors, both International Harvesters both very old. One was a 40's something cub with a tricycle front end that we had the sickle bar hooked to for cutting and an H tricycle front end that we pulled the rake and baler with. The baler was an old John Deere 24T powered by a 2 cylinder air cooled Wisconsin Engine. It may have all seen more hay than a lot of folks can even imagine but all of it worked great and accomplished the job. I loved driving those old tractors. Don't have them any more and definitely miss doing hay every summer.

Man you have some really nice thick looking windrows and bales Dennis. I wouldn't be surprised a bit if you made it way past 900 bales. It's also nice to see how technology has made it so much easier, so you don't need to have someone stacking the bales on wagons(something I remember doing so much of). By the way, that small gift will be in the mail within a couple of days.

Watching you backup three axles was impressive! Not an easy task! Beautiful fields up there and, You’re really easy to listen too...

I haven't helped with hay for 16 years. Oh, the hot days and direct sun standing on a trailer towed behind the bailer and running bales to the back and stacking them 6? levels high. Then having to haul the hay cart to a barn and stack it all inside before the day was done so it wouldn't get any wetter. it was some dirty work and I have a grass allergy so I would break out from all the exposure. Miss it and don't miss it at the same time. The accumulator makes it looks so nice. I cannot wait to see how you get it all on the trailer and then put in the barn. thanks for the videos.

I enjoy watching your operation. I saw the old pull grader in the background, love it. I always put my foot on the middle roller bar with spring on it. I push back on it as I hook the belt. On my new Holland 7060 , I push the wrap button to put the net wrap on small bales or when I change the net wrap roll. Give that a try. We could have some good conversations on hay production and we do things a lot the same. Thanks for the great videos and pretty hay

Im retired but my last baler was a NH 310. I thought that was a good baler. Seeing this i see there have been a lot of upgrades on the New Holland balers. They are really Humming! ;)

Great video angles! Congrats on your 1st and 2nd awards on the backing contests! I knew when I was watching you back up that it wasn't your first rodeo. Haha!

excellent work well explained and good camera work. .thank you from Ireland

Watching you bale brings back memories of when I was baling, I wasn''t out of HS yet, the tractor was a model 4010 JD, which was a new model then, a JD wire tie baler and a 4 wheel haywagon on the back with two guys picking the bales out of the baler as they came out. The backing of a 4 wheel wagon was no fun. We owned a JD model 60 two cylinder tractor, with a narrow front end, no power steering, and a hand clutch. Now THAT took some time!

Great video and lovely hay. Greetings from the UK where we have been doing the exact same job during the last few weeks!

Thank you for Farming!! Amazing how much you are doing solo.

I learnt to drive a grey Ferguson back in 1958 on my uncles market garden farm, left school spring 1960 and went to work on a dairy farm. Two brother had three farms between them and grew all there own cattle feed, silage, hay and grains with the straw baled for bedding. They had 13 tractors between them and new kid on the block me got the way old Fordson TVO/Petrol beast. My first job was to muck out the winter sheds, hand balling onto a tipper trailer, haul that to a field and dump it to weather out. Once I finished the small sheds, I was given a Fordson Major with a front fork loader, man I was in heaven no more hand blisters. Each day I practised backing the trailer faster and faster until I could do it flat out in high range. Now the trailers were Weeks Trailer with the axle right on the arse end, so easy to reverse, the did axle ones were a bit harder to get the swing just right. Once a week I would attend the Young Farmers Club and they asked for contestants for an up coming YFC show, one of the other tractor drivers put my arm up and I was picked. Well I won the trailer backing and came second in the plow mount and dismount competition. The two bosses were so pleased they got me drunk in the beer tent. So watching you bale the hay brought back lots of memories, our baling outfit was a Massey Ferguson 35 tractor, Massey Ferguson baler and a farm made skid. The bales were taken of the baler by hand, stacked on the skid 4 high, a scaffold tube with a 1ft point would be driven into the ground in front of the bale stack, held in place and as the skid pulled forward the stack would slide off. Hopefully Always good to see you guys getting the crops in, well done.

Good looking hay, hope 2020 is treating you well. Thanks for the tour, that is some pretty country you are farming.

Hope your still hanging in there and have a great 2023 bale season!!!

Wonderful - I felt that I could smell the hay - lovely colour.

Awesome video. I use to do this when I was on the farm. Baled hay every summer. It’s fun. Getting the twine tried together is an art so bales don’t break apart. How well do u do at that. Show us how u tie them together that’s hard to do. Can’t wait to see your wife baling hay. Thanks Ronald

I was finally able to get all my hay up here in eastern Kentucky (cut 6/14 and rolled 6/16) and off 11 acres I put up 48 5x5 rolls. I should have got it up a week earlier but I was gone to our state FFA convention. I was in FFA for four years and really enjoyed it. My junior year I placed first in the region for tractor driving I’m going to miss it next year.

One fine setup ya got there. Gotta kick at the 18:00 min mark with the FFA back up championship story:) You did one helluva job backing this chain linked contraption...wonder how I would stack up

Good looking bales. That hay baler you've got there can really pump out the bales. Pretty impressive watching you back that hay train. If that was me, I'd have it jackknifed every direction but the right one. LOL Stay safe.

Love seeing that critter in the rear, that use to be me, 25 cents a bail to load it and put in the barn,, thought I was rich,, ha, Thxs for posting this, really worth watching, gb

That’s an amazing machine! I’d like to see the inner-workings of it and how it bales. Great camerawork!

Great Video Dennis, I believe everyone around here is behind on their hay this year, i know i am. ha. Boy i'd love to have an accumulator like that, thats a fine and handy piece of equipment. Godspeed my friend.

NH Haytools very best in the industry !!! Shipped all over all the world ~

Great stuff Dennis !! Thank you for sharing with us !! I was seeing the baler tieing at one point every 5 seconds ! Very good !! Please be safe my friend and may God continue to bless you !!!!!! Eddy

Good looking hay wish I was set up like you guys I would square bale all my hay like it better than round bales.

Good stuff man. It's so dry and hot down here in southern nc. The crops down here are dry and smaller than usual. I think y'all get a little more rain than we do and I'm sure it's cooler. But hey at least they are paving roads lol. This dry heat is great for that.

I'm from Groton/New London coastal Connecticut. The fair is over the State line in Massachusetts about 45 minutes from me. Eastern States Fair in New England known as the BIG E in Springfield. I've been watching your vids for awhile. Today i liked, subscribed and hit the bell. Keep the quality vids coming. Seasons Greetings!

Great video, that is one productive equipment setup you have!

love that Massey , i have a 431 Massey Ferguson it's around 55 horse power it does all i need and more on my family farm i live on but it's not farmed anymore but i have some fields i keep up and plant food plots for deer hunting and i have a one mile dirt driveway i keep up to and bush hog around edge of fields and land line paths or fourwheeler paths , i wish i could farm my place .

Any one else notice when your wife runs the baler. She will look strait forward. No matter what is going on with the pick up. She will run right into a big slug with out so much as a slight pause. BOOM!!! There goes another sheer pin. Word of advise. Dont give her too much crap about it. otherwise she will storm off and leave you to do all the work. Oh well, just happy to have her help. Sheer pins are a small price to pay for the view ( Tanning opportunity) and not having to go back and pick bales off the ground. Thanks Honey.

J U Dyrssen Farming, what a life.I moved from 60 acres i Germany to 6000 acres in Australia,having a fantastic time there and at 82 still on a farm

Man , I don’t miss square baling at all !!! 😆

My high score on a farm was with an Aliss Chalmers 5050 tractor and a no.9 Massey baler :450 bales in an hour! It would take us 5 to 10 seconds only to change wagons and i was baling faster than the guys stacking in the barn!

Hello from Bristol, hi Dennis. Wow. Looks like a bumper crop of straw ya got. The lime and fertilizer seems to help a lot. It’s good ya got some dry weather to get it up. I believe it’s rained 95% since February. Say, I bet ur new hay barn is almost up by now. Hope it’s gonna be big enough with all the hay you’re getting up. Lol 😂. I wished I was closer to ya, I’d sure like to give ya a hand with some of your chores. I guess the videos will have to be good enough. Awesome footage of everything as usual. I noticed the baler and such didn’t get away from ya like the mower did. Lol. Gonna be 90 + this weekend. Heat index around 100. Gonna be hot and dry till Monday the 2nd. Take her slow buddy and I’ll see ya one the next one. Warren

What's an accumulator? How's it work? I've never seen one. We've used flat racks and kicker wagons with kicker balers. Dad always had first cutting chopped into haylage in mid to late May. The other three cuttings were baled into small square bales. This was Alfalfa for our dairy herd.

"Everyone is getten up hay....it's crazy" 😂

Baled many acres with a MF 165 and a 276 hay liner, great package together, loved those two together

Nice backing job on the sharp point.

Everything seems to be going smooth.....something you will never here me say, or think while I’m baleing. Lol

That New Holland baler can sure handle some big windrows. Great job with all the camera angles too.

Grew up on IH square bailers and all their quirks, but that's all we knew back then. 70-80's. No accumulators. We caught and threw bails as they were launched from kicker. Great fun and got paid $20 a week. Simpler times, I know but yeah, reality... what are we really missing now?

I miss baleing hay sometimes but good to see it's going good for you.

Yeah you're going to have an early winter get all your harvest in before the end of October they're going to increase the prices on everything yeah and you do know right now for the homeowners on the farmers they've got a grant going start a 2 weeks ago and he'll end in October if you need any assistance apply for the grant but get all your hay in for your cows and go get supplies for 4 months emergency supplies too and don't forget to have a generator for backup or solar panels case of blackouts of storms you know how that goes yeah remember to get some plenty supply of dog food for the dog or your cat or whatever and yourself have a blessed day 🤳🙏🤝💌💞💞

damn...i wish i could enjoy that Farm Life u living. But here in Germany there is no way to get that Feeling. You have to go to School again for 3 Years if u wanna Work in a Agriculture Company. I think in the US it would be alot easier to get a Job on a Farm without 3 years on a Schoolbench :D And btw....Great Video and perfect Camera Work out there. :)

Your good at back in that mess up that's for sure good job

The other day i got 1036 bales from a 2 hectare field (about 5 acres) those were the biggest windrows i have ever seen 🚜💨 Greetings from Belgium!

You can back up really well. We use to back up our wagons up the barn hill into the barn before we bought a elevator.

Nice video but you should have a flat 8 sledge

THE Massey, THE wife, THE hay

I have to back my rig into point land because I have small terraces. Congratulations on ffa contest. Shows your ability

Good looking hay, first time in my life i hired someone to bail my hay my tractor is broke down i think it might be cheaper in the long run.

The clunk is the hay dogs dropping back into the chamber. The reason is they hold the hay back from going back into the chamber. Bill Jehorek 308 280 2919. Have run one for years.

We always had that heavy clunking noise on all our balers too. You have a very heavy fly wheel and a big plunger on baler that make that noise... If u stop and leave tractor in neutral; you'll still get the bucking from the heavy weight of the fly wheel and plunger....

I can't believe how nice those bales look when you're only getting 10-12 strokes per bale. But I'm used to running an old 315 model, lol.

Hi, could you please name the brand and model of your accumulator, please? It would be also nice if you show and explain the function in detail. Here in Germany this technique is almost unknown but I am searching for a way to harvest small bales totally mechanically.

Stunning video, the NH baler just rambling on

I enjoy the videos keep up the good work

I can feel this video, the red arms from all the pokes. The chaff in the eyes and nose. And the weat t shirt from the sweat

we used to have to pick up bails by hand and load on the trailer then stack it in the barn but i was a teen when i did that i don't think i could handle now but you have a nice set up there

That’s one reason why I like NH bailers. You can put it to her and it won’t plug or break shear pins

hay hay hay it's a beautiful day. I learned a lot from your videos, thank you for sharing

never have seen the piece of equipment being pulled behind the baler. Ive live my whole live around hay country, in Central Washington, and done baling with Freeman Balers, and we use New Holland Harrowbeds to pickup the bales. one farm I work at raise's over 5,000 tons of Timothy a year.

I always wondered how a bale of hay was done

Beautiful country and hay

I just read something about a different baler, and it says for their baler you need to cut the PTO shaft to fit each tractor. Is it possible your shaft is a bit to long or short for this tractor?

The Big E, or Eastern States Exposition, that’s the State fair for all of New England. BTW- there are 6 states in New England, Maine, New Hampshire, Vermont, Massachusetts, Connecticut, and Rhode Island.

Getting some good hay bales, that's for sure!

We still use a hayrack and an old JD baler getting pulled around with an old Minneapolis Moline 670...

As a retired agricultural mechanic, i have a question for you about your bailer. Did you reset your PTO drive clutch on the bailer before starting the season? If not you have the potential of causing thousands of dollars of damage tp your bailer. I know it have fixed them after the damage was donne. Its easy and does not take much time with no special tools.Now you might want to do this with all your equipment that are equipped with PTO drive line clutches. Let me know if your interested and i will give you the procedure step by step.

I found it interesting to see how the bale accumulator handled the bales on the slope.

My father n law had a accumulater that was from Russia, I works the same as your but it isn’t high in the air. The bails push iron plates to the spot the bail needs to go, when it gets 8 bails the back door opens and closes with 8 bails ready to put in the barn

Well I have to say: one of the best / better vids I've seen on Baler performance , for a long time....a good thick Swath - not the best but I've had to put up with thicker knotted / twisted swathes and used IH and deere balers. 9-11 slices per bale - you making ? I've managed to punch through with 4 - 5 slices to get a spongy bale so it dries better - our hay seldom gets dry enough to bale solid bales which don't go moldy. thanks for posting.

Making hay while the sun shines. 👍

My super TIP of the day...In my neck of the woods...I wait for the County to cut the grass on the side of certain County roads(Ones that have excellent grass). Then just rake it myself the old fashion way and load it up and take it to my goats, save the rest. kzfaq.info/get/bejne/g9GWabufttfYlY0.html Thats just one tip...

Is that junk when the plunger compresses the hay that takes power to do that

Does this u tube come with Smell Vision?

Haha I got a krone baler ad before the video....what RPM do you like to bale at? If a bale doesn’t tie does it mess up the accumulator?

Just wanted to say "Hey!" Thanks for the different camera angles. That rig reminds me of "PLINKO", a game on "The Price is Right". (I know your to busy to watch TV, but I work nights.) Git-R-Done before the rain. Stay safe.

How many bales does your accumulater hold

Baled hay couple seasons with a friend down the hwy. Not bad ... 2 on the wagon ... funny friend never let us drive. Baled hay with my uncle one season ... he had a throw baler. Talk about a pain in the arse to unload. But wouldn't skip the experience for nothing.

I laughed out loud at the 900 bales guesstimation! Edit: haha i thought you had meant round bales!!

The clunking noise I'm hearing is in time with the baler The pto should be running at 540 rpm or above. (I don't remember the other speed. I have a 60's Oliver.) Good video. Take care and be safe.

I wish I had the accumulator but we don't bale to many squares just a few for the horses and for animals that are put in the barn for a few days for calving or other issues so we put 500 on the ground tops and then pick 500 up and put in the barn and then we act like those bales are 100 dollars a piece and only use for barn use only so I can skip the squares the next summer but almost out so I will have to make a field this year I d rather roll it all I need to get hay buster that would fix the problem good video

Seems like it clunked more downhill. Something seems off in the pto but if it's done this since new must just be this model tractor. Can't see it getting worse then must just do it. On that backing up. I would call that a peerowfeshnal. Best I've seen.

Hi Darrel , where do you live, it looks good ground about the same as here in Tasmania Australia great vids we really enjoy them, so natural to watch

That's pretty cool, wish we had that when we were putting up hay. that was a long time ago.

Respect and admiration from NJ.

Looks like a sweet crop right there see ya Napa mike