Thanks!

Will I follow all the steps you mentioned in this video for communication with a 2017 Silverado? Thanks again.

Umm.... Sort of, but the software has changed to Techline Connect now. Which you wont used the pirated software for now, you will actually download and update the tool just to do SPS2. I cover the newer software in this video:kzfaq.info/get/bejne/kJZ9oKalyNm9Y2Q.html

Will I need to purchase the VCX-NANO to program this ABS module? Thanks again

Will Do.

Thanks

Yes it will do European GM as well. GM allows you to reuse module and program them to your care (usually). There are some very new makes and models that will not allow you to put in a used PCM.

You have to right click on the Interet explorer and select "Run As Administrator" then let it do the install. kzfaq.info/get/bejne/bqeKhrF9vLCriYU.html

Mine works fine on Class 2 cars with Tech2Win and SPS.

it is $45 now and it is per vin number for 2 years. here is a more modern video: kzfaq.info/get/bejne/kJZ9oKalyNm9Y2Q.html

Yes, after 2006 or 07. But you will have to call the Aftermarket AC Delco support center, to get them to modify the BCM and the ECM/PCM software on their servers to enable the cruise control operation. They charge $120 due to changes on their end. You will have to then spend the additional $40 to download the software for your VIN. Some vehicle models only need the BCM software changed and others need both BCM and ECM/PCM software changed. The you can install the required parts for cruse control and re-flash the PCM/BCM. On older cars say 2000ish through 2006 you can reprogram the RPO codes via Tech 2 Win, just enable them. The RPO Code for cruise is K34 1999 and back you will have to buy the actual module that suppored cruise control and all the other RPO codes and replace the physical module. Also physical wiring may need to be installed, as not all harnesses had all options included.

Well explained! Got it. You got one subs here. Thanks Buddy. 🙏

Yes

MDI2 Clone, a faster laptop with Windows10 and a $40 purchase of the VIN on acdelcotds.com A battery maintainer is good, but you should be fine wthout it just make sure you battery is fully charged and good before you start. I have a newer video on this: kzfaq.info/get/bejne/kJZ9oKalyNm9Y2Q.html

Yes it will do it.

It should. I haven't programmed one that new though.

SPS is purchased by the Vin Number you want to program and you can program that VIN for 2 years.

@@frugalprepper Alright, thank you. Edit: I see completely different subscriptions and prices so I tried to reach the site with an US VPN and now I see what you told me. In my country there are different offers for different prices not like in the US what I didn't know. In my case I would have to pay either 39€ for 2 hours of SPS or 22€ a day for SPS2 + Service Information. This whole difference in country really confused me and now I understand that.

Welcome!

You just need to go to www.acdelcotds.com and create and account, but the 2 years of programming for your VIN number ($40). Then it will let you download Techline Connect. From techline connect you go into SPS and you can update/program the module.

You can, but if you need GDS2 I would recommend getting the one with the hard drive. GDS2 is real tricky to get working from the downloads and it's all seutp and working on the drive. Tech2Win goes up to about 2010-11 and everything after that will need GDS2. This will give you full bidirectional controls and allow you to program keys/fob set options, ete. SPS is for programming Modules. To run SPS you will need a drive with Windows10 and the latest Java on it. I will update the firmware on the MDI, install a new J2534 Wrapper the first time you use it with SPS. Then when you put your old drive in to run GDS 2 it will come up and tell you you need to update your PC software to match the firmware on the MDI. You have to download Chrome go to AC Delco TDS and go to the Utility Tab and download the updated MDI software and it will work. This will happen about 2 times a year when GM comes out with a firmware update and you program with it. I use the drive they sent me to run GDS2 only, but Tech2Win will work on it too. I run my Tech2Win and SPS on a Separate Windows 10 drive. I've actually considered getting second MDI to just run the GDS2 with and never updating it.

@@frugalprepper thanks for the awesome response! I am looking to do immobilizer relearn and an air filter reset on a vehicle so I will just be using SPS. After reading your response it sounds like I should I dont need the one with the hard drive. Is that right? Thanks again.

Bienvenido

It will be the same way for most any J-Box as far as the SDS software/website goes. You will need to install th J-Box drivers though from Autel. support.aeswave.com/hc/en-us/articles/115001612434-Autel-J2534-Drivers-Install

You just buy a VIN to SPS2 and then when you go in it gives you the option to download Techline connect and install it. The SPS is now part of Techline Connect, it will install GDS2 and Tech2Win and everything else, but they will not run with out a subscription, but you can still access the SPS to program.

Yes I have, it works up to current models.

It will unlock them. The older ones will often unlock through tech2win. Most of the newer ones may require unlocking via a SPS update.

No it comes with pirated Tech2Win so you don't have to pay for that. You will only pay if you program with it.

@@frugalprepper Great, thanks! Will this copy of Tech2Win run without issues under Windows 10 Pro_64?

@@frugalprepperare u able to do the diagnostic with tech2win pirated version?

It was one I had laying around. It was a 9volt center positive. I believe it will work with anything 8-16V though.

The pirate software they are giving you is Tech2Win and GDS 2. Those are going to require s subscription on Techline Connect to use, and they aren't cheap. GDS2 Light Duty (2010 and newer) - 3 Days $64.00 - 1 Month $254.00 - 1 Year $644.00. Tech2Win (Most things 2009 and older) - 3 Days $62.00 - 1 Month $252.00 - 1 Year $616.00. The pirate GDS2 only goes through 2017 though I believe, so for anything newer you will have to purchase a subscription. The programming piece has to be purchased by VIN number for $45 for 2 years on Techline connect, and programming is done online via SPS. SPS doesn't do diagnostics it is for programming only. You have to buy that anyway.

@@frugalprepper Thank You .. So if I get a bare MDI 2 box, no software, I can get the tech2win by subscription for three days. That means they will provide the software for download. What got me was all the offerings of sata drives and extras ... So to reprogram a module (ABS/EBCS) I need $64+$40 for one 2008 Saturn Vue ... Plus the MDI2 clone and my PC - Win 10 pro admin rights and all that. Thank You ....

@@mikecliff2367 To reprogram you only need the $45 piece. You only need the GDS2 subscription if you use GM's diagnostic software.

⁠@@mikecliff2367how about an update? Did u get both subscriptions? Can tech2win do the Service Fast Learn Adapts?

I do update it regularly with the GM software.

Yes

I believe Corsa is a German car by Opel. So now this only programs GM's

@@frugalprepper opel uses GMs systems

It is a MDI 1 in a MDI 2 case I work on old stuff. I will be at least a Decade before I need 2020 or 2021 support.

@@frugalprepper darn it I just bought this for my 2018 it won’t work…

@@frugalprepper I really hope this works do you think it will?

@@killasmoke2142 it will work on Global A pretty sure the first Global B car is a 2020 ct5 followed by the c8 corvette ive used this on a 2018 and 2021 Camaro no issues including flashing modules

$40 for two years access per vin number.

Yes

Yeah

Yes

Used ones?

@@frugalprepper yes, but we need to pay to work on a specific vehicle. TBH, I thought that it comes with pirated software and You're good to go even with programming. Anyway, it's still better than nothing, at least You can scan the codes and trace the faulty sensors or bulbs.

I run my Tech 2 Wiin on Windows 10 now. But the hacked version GDS2 only runs on windows 7

It would if you then bought the latest GDS subscription, but you don't need it. You just do this: Close all doors and trunk. Insert the working key into the ignition and turn it to the ‘ON’ position. Press and hold the ‘LOCK’ and ‘UNLOCK’ buttons on the driver’s door panel simultaneously for approximately 10 seconds. Release the buttons when the security light starts to flash. Within 5 seconds, press any button on the new key fob. The security light will flash quickly if the programming is successful.

@@frugalprepper Thanks for the info. The thing is that I bought vehicle from auction. All keys are lost with it.

I believe so, I haven't programmed anything that new though.

I knew The MDI and Bosh were the same. Didn't know about Vetronix.

Vetronix made the GM scan tools at first.They made a scan tool which is obsolete now,the Mastertech.I know a former Vetronix rep,a good friend of my dad's.He was forced into retirement by Bosch after the buyout.Bosch saw he was one of two sales reps that made the most money wanting to cut his commission and pay.He would not take this and Bosch forced him into retirement.

There is no cost per hour. You buy a VIN number for $40 and you can program it for 2 years.

It's windows 10 and chrome now to program.

Yes

$180

The AC Delco TDS site only supports English, French, Spanish, and Korean. You will have to use google translate to figure out what it is saying. Сайт AC Delco TDS підтримує лише англійську, французьку, іспанську та корейську мови. Вам доведеться скористатися Google Translate, щоб зрозуміти, що він говорить.

Good Luck Fighting the Russians and God Bless you all! Успіхів у боротьбі з росіянами і бережи вас усіх Бог!

@@frugalprepper Thanks for the answer! Im meant whether it is possible to fill in the firmware in which you can change the language in My link to Ukrainian

@@frugalprepper Bіg thanks!!! Glory of Ukraine!!! Thanks behind land lease from USA

You still have to buy the access to program the VIN of the car you are trying to work on, no matter how much you pay for you MDI

Yeah this is a cheap Chinese clone not a real MDI.

Do you need both devices or do they both program ecu .but the lil box can go 2020 then the handheld one go to 2014

Because I have a GMC truck 2006 I heard that this can read GMC reduced power code

Thanks for wishing me luck!

Wow thanks!

I have bought from them before as well.