@timbell6144 4 ай бұрын
Best Mastercam training video I have seen yet...way better then Mastercam University
@MLCCADSystems 4 ай бұрын
Thanks for watching, happy you enjoyed the video!
@jermainerace4156 9 ай бұрын
Another reason to prefer canned cycles is that it can make it much easier for a machinist to understand what the machine is supposed to be doing at any moment.
@MLCCADSystems 9 ай бұрын
Exactly, clear communications and comments make the code so much easier to navigate and understand.
@BillyCarter91 9 ай бұрын
@@MLCCADSystems Also it's the programmers job to make a toolpath that matches the print, but the machinist will optimize speeds, feeds, doc etc. and editing long handed doc is a pita, especially on tapers. The canned cycle is a necessity so I can tinker with the doc to break the chip. The doc and feed required to break the chip varies based on material condition, chipbreaker geometry of whatever insert is on hand, tool height error (affecting rake angle) from crashed turrets that will always get fixed after the next job etc. etc.
@frostbitepokin9520 3 жыл бұрын
“My kids keep me young” Hell yea
@jessecoleman9451 2 ай бұрын
Do something this detailed with boring and drilling with lathe only. No mill ops. That would be cool too
@MLCCADSystems 2 ай бұрын
That is a great idea, thank you for the suggestion! I passed it along to our team to add our list of videos to create.
@jessecoleman9451 2 ай бұрын
My problem in particular was that when I programmed the drill then bore. It didn’t register the hole size from the drill And just tried to do a g70 pass for the bore.
@MLCCADSystems 2 ай бұрын
This is a great question to pose to your support provider. If you are an MLC CAD Systems customer, you can reach out to your local team or the full team with the information here: www.mlc-cad.com/technical-support/ You may also want to review this Advanced Lathe Tips and Tricks webinar that goes into more detail on the topics you're interested in: www.mlc-cad.com/advanced-lathe-tips-tricks/
@michaelfrancis4667 3 ай бұрын
Thank you Sherman for taking the time to create such a thorough video of what it takes to create the CAM side of a lathe operation. Your efforts are very well organized as well as intuitive. I also like the fact that you took the time to show in, several instances, more than one way to "skin the cat". I have been programming for 25 years in G-code but for reasons I won't go into here, I find myself behind the times with this approach to metal working. I have been attempting to learn Mastercam on my own through videos such as yours and others ... (Titans of CNC comes to mind). My question to you is... do you think it will be enough to attempt to learn Mastercam this way or should I consider enrolling in a professional institution that is industry certified and would be what a potential employer is looking to see on a resume? I know this may sound like a silly question as MLC CAD Systems may very well be just such and institution but clearly I'm not familiar with MLC. I would encourage the opportunity to reach out to you in a way/forum that is a little more professional than just the "comments" section of a KZfaq video and thanks again for such an outstanding tutorial!
@MLCCADSystems 3 ай бұрын
Hi, Michael! Happy that you're learning from our content. although strictly learning on your own is a viable route, but if you wanted to learn the ins and out of Mastercam from an established institution we provide training at MLC CAD Systems. You can learn more here: www.mlc-cad.com/training/mastercam/
@michaelfrancis4667 3 ай бұрын
thank you!
@MLCCADSystems 3 ай бұрын
@@michaelfrancis4667 Of course, anytime! 😁
@igaming325 3 жыл бұрын
best video i have seen in my live THx so much n
@MLCCADSystems 3 жыл бұрын
Wow, thanks!
@thirugnanas6074 3 жыл бұрын
Thank you sir
@MLCCADSystems 3 жыл бұрын
Thanks for the feedback!
@mapletraffic8086 4 жыл бұрын
Awesome video sir
@MLCCADSystems 4 жыл бұрын
Thanks!
@DrDime_ 2 жыл бұрын
Not sure why you chose to do it with a model no one else has. That confused me. Still watched the video to learn, and I did learn, so thanks.
@MLCCADSystems 2 жыл бұрын
This procedure can be followed on any model that Mastercam can import. Search around for 3D models online (3Dcontentcentral.com, grabcad.com) or see if one of the Signature Parts will work for you, it is available on Mastercam's website along with many other free resources like posts kzfaq.info/get/bejne/hranl8mou5nYias.html
@ahmedjameel385 10 ай бұрын
Great 👍
@MLCCADSystems 10 ай бұрын
Thank you! Cheers!
@ahmedjameel385 10 ай бұрын
Sir i fallow up that tutorial and i make program but show a error that is "tool collision to stock". Can you help me?
@MLCCADSystems 9 ай бұрын
If you are an MLC CAD Systems customer you can reach out to our support team to discuss your program and offer advice on how to resolve the problem.
@karthikk3003 Жыл бұрын
Give Master cam Turning How to Use Usage
@md8744 2 жыл бұрын
Hi Sir. Could you help me this alarm on mastercam lathe please please! " No areas of remaining stock found " after I created stock, Chuck for dynamic roughing grooving. Stock showed around model pretty good but didn't know why it pops up all time. Thank you
@MLCCADSystems 2 жыл бұрын
Please reach out to your support team for this issue. If you are an MLC CAD Systems customer you can contact us here www.mlc-cad.com/technical-support/
@antoniorguez2932 3 жыл бұрын
Hi, Well produce explanation off Lathe CAM OPS. Where could I download the step fil or solid fil to practice?
@MLCCADSystems 3 жыл бұрын
Here you go! mlccadsystems-my.sharepoint.com/:u:/g/personal/marcus_brown_mlc-cad_com/EZVwQNFG37NDvNBOnA-RJN4BCS6CrAM3yv01YySLKoa08w?e=q1FTMv
@user-bd5hc8bk8n 11 ай бұрын
why do you set up the x axis perpendicular to the chuck face?
@MLCCADSystems 10 ай бұрын
That is the proper alignment for a standard lathe part.
@ahmedjameel385 10 ай бұрын
Sir i need Siemens 828d_2x_lathe post process file for Mastercam.can you provide me?
@MLCCADSystems 10 ай бұрын
I believe we can, please submit a request according to this article and the lathe request form and we'll reach out with more information. www.mlc-cad.com/mastercam-help-center/how-to-request-post-processors/
@ahmedjameel385 10 ай бұрын
If you don't i want to asked that, mlc service is a paid service?
@MLCCADSystems 9 ай бұрын
We develop and sell post processors for Mastercam. There would be a cost associated with developing and delivering this post.
@jedimaroliveira4823 Жыл бұрын
hello, beautiful class congratulations! I would like to ask a question. how to make custom trapezoidal thread prlo 3d model. ? how to make the route? thanks
@MLCCADSystems Жыл бұрын
I'm not sure if I fully understand your need, but this is a great example of a question that is perfect for contacting your reseller. There are ways to create custom threads, but the specifics of each request will be too detailed for a KZfaq video in many cases.
@jedimaroliveira4823 Жыл бұрын
@@MLCCADSystems It would be a special endless thread. I will check. Thanks for help .
@prathmesh3234 5 ай бұрын
Which software
@mohamedabousalah9898 4 жыл бұрын
Hello sir What's you favorite CADCAM software ? Gibbs,Mastrcam,NX Thanks
@MLCCADSystems 4 жыл бұрын
We chose Mastercam and SOLIDWORKS as our favorite tools for CADCAM, with Mastercam being the best CAM tool and SOLIDWORKS the best CAD tool. They overlap a lot in terms of functionality, so we did a breakdown of how they differ so you can see which one is a better fit for you, or if perhaps you need to get both. mlc-cad.com/solidworks-mastercam-or-both/
@matiaspablo89 4 жыл бұрын
Your video is very helpful! Have you come across something like when master cam would post G-codes but machine would do something else? I think this issue has to do with machine configurations. How would you fix the problem. Thanks in advance!
@MLCCADSystems 4 жыл бұрын
That is a very odd thing indeed, and would likely require an expert to help you troubleshoot it and narrow it down to the Mastercam project, the post-processor, or the machine control itself. Some CNC controls and variants can have special quirks that you have to know about and understand to work around or adapt your code to. If you are an MLC CAD Systems customer please reach out to our team to discuss your issue, mlc-cad.com/technical-support/, and if you need help with your post we can offer that service to just about anyone, mlc-cad.com/service-inquiry/ Good luck with your machine!
@mardrom1 3 жыл бұрын
It has taken nearly 3 years to get mastercam as i like it for our Okuma multus B400W and thats ONLY for the milling side... not started on the lathe side till now and i expect there to be alarms galore. My Mastercam reseller in Sweden is excellent and my agreement covers this very in depth and very demanding area. Its a little odd i think that such a complicated machine is not already set up for this. Our post processor NOW posts at the top of every program... a tool list WITH load monitor info and load monitor Nr and operation Nr Also each operation contains the load operation Choice of Nr AND the load operation axis to monitor. Everything now posts clean. It has been a very long and laborious job with a high demand from my side to get it this way. I dont think anybody at work could comprehend the dedication it has taken to get us this far. And now we start with adding the clean posting of lath operations. Once done though.... the enjoyment of working with the machine is much better. My only concerns has been with management not understanding this and the worry of new mastercam versions messing up this mountain of work.
@JohnBlaze505 3 жыл бұрын
We're having the same problem with our Tool Room lathes. Did you ever figure it out?
@nickbryant6970 3 жыл бұрын
Is there anyway to get the file for the Pawn? I am scheduled to take Mastercam training through you guys but wanted to get a head start
@MLCCADSystems 3 жыл бұрын
Absolutely! If you have a local sales or tech contact that would be the easiest way to get it, but I'll let Sherman know you're asking about it.
@MLCCADSystems 3 жыл бұрын
mlccadsystems-my.sharepoint.com/:u:/g/personal/marcus_brown_mlc-cad_com/EZVwQNFG37NDvNBOnA-RJN4BKbGPUYiLdCfKx_e3QuYGmQ?e=x7VYvf
@nickbryant6970 3 жыл бұрын
@@MLCCADSystems Thank you!!
@derick3482 Жыл бұрын
at 1200 and 15 inches a minute you'll break your 1/8" end mill
@MLCCADSystems Жыл бұрын
Yea... you definitely need to check feeds and speeds, this tutorial is more geared towards how to create the toolpath than fine-tuning the feeds and speeds.
@derick3482 Жыл бұрын
@@MLCCADSystems no you do check your feed and speed bro
@kuei1215 2 жыл бұрын
Whenever people create jaws they use "parameter" instead of "chain". Chain does not seem to work. Following the instructions for chain does not work.
@MLCCADSystems 2 жыл бұрын
I asked one of our experts to test this and Chain worked on their file. It could be caused jaw geometry with overlapping or duplicate contours creating this problem, or not trimmed properly. This is a perfect example where your local reseller will be able to look at your files and workflow to help you figure out the best way to proceed. Best of luck!
@kuei1215 2 жыл бұрын
@@MLCCADSystems I am using 2020. First of all, directions say to draw in upper quadrant. Which one? There are 2 upper quadrants on my planet. A right and a left. I tried both. No good. Secondly I tried a very simple geometry using a rectangle from the rectangle drawing feature. 4 entities (lines connected). No duplicates. All sides trimmed with no breaks. I used top view as stated in the instructions at Z0. No good. Nothing I see works. After I select the chain, it says to select the geometry, which I already did, over and over again.
@kuei1215 2 жыл бұрын
I guess MLC cannot get it to work either.
@MLCCADSystems 2 жыл бұрын
It works for us. You need to reach out to support, this won't be an issue we can troubleshoot blindly in these comments
@MLCCADSystems 2 жыл бұрын
If you are a customer of MLC CAD Systems, please contact our support team and reference this comment section and I will make sure we get you directed to the author of the video. www.mlc-cad.com/technical-support/
@kerenkilmanun533 3 жыл бұрын
Hello, explain what is meant by mastercam?
@MLCCADSystems 3 жыл бұрын
Mastercam is a software program that can create the instructions necessary for a CNC machine to cut parts out how the machinist wants it to cut. It is a manufacturing software tool. I hope that helps!
@kerenkilmanun533 3 жыл бұрын
Thank you sir🙏
@karthikk3003 Жыл бұрын
❤hiiiii sir
@karthikk3003 Жыл бұрын
H r u
MLC CAD Systems
Рет қаралды 4,2 М.
SALEM EPISODES
Рет қаралды 882 М.
Harley Quinn with the Joker
Рет қаралды 28 МЛН
TITANS of CNC MACHINING
Рет қаралды 326 М.
SALEM EPISODES
Рет қаралды 882 М.