Topics are like TARGETS & Instructors are like SHOOTERS. JEFF & JERRY ARE THE BEST SHOOTERS I'VE ALWAYS SEEN 👍

Jeff makes Civil 3D so relatable and simple to use.

Now that 90% of the tool's bugs are worked out, this video is right on time. Will be sharing this with my team during training sessions.

Hi..Mr.jeff Bartels! You are the Best Civil 3D tutor. I have Learned a lot form your videos. Your are my inspiration to learn civil 3D.

Well done, Jeff. You're my go-to guy when it comes to updating my civil 3D skills. It's nice to see that pressure pipe is now useful. I first used it on a large project about 10 years ago. In which i stopped using it after that. Now i think it's usable now.

Mr. Jeff Bartles you are the best. You are my hero.

I am giving a like before watching. Jeff is the best!! Thank you (from Brazil)

Oh My!!! I have been wasting so much time creating pressure networks. Jeff, you are a lifesaver, I am so glad I found your channel. I love creating networks, but I have never taken advantage of new pipe run method, because I didn't understand it. I have been creating them manually. Now, that I do understand, you have renewed my love for creating them. Thank you so much for this. Your channel will be my number one resource for Civil 3D from now on.

Thank you so much Jeff... God bless you for this wonderful gift!

Thanks, Dear, @Jeff Bartels I could able to complete my project for the DI pipe network using this video thanks, and may God bless you

And finally, Jeff into wet Civil 3d😃😃 Congratulations.. It will help the learners a lot. Thank you Jeff.

you just made the C3D easier than ever you even help me in school, thank u so much

I very recently took a look at the pressure network tools after ignoring them since they were first released due to deficiencies in functionality. Typically I'll start out using new tools without studying the help system, just to get a feel for how they work and find out where I need to focus my time. The initial experience was frustrating. The familiar workflows for working with pipe networks no longer apply. Selecting a pipe does not bring up a contextual menu for manipulating the pipe network, but instead leads the user to the alignment tools. This is not intuitive at all, which is frustrating, forcing the user to delve into the help system immediately to figure out what to do. The help system does not include tutorials for pressure networks, which is one more source of aggravation. I have subscribed to your KZfaq channel because you are a great resource, being closely affiliated with the product team. Your video has clarified the workflows considerably and show there are much needed improvements since I last used the tools. I now feel much more comfortable with using the tools on live projects and will move forward with them on a current project. I understand this is a work in progress. I can see where there can be improvements to make the tools more intuitive. Hopefully that is being considered by the development team. In the meanwhile your video has really helped understand the tools and is a great resource, so thank you for making it available to the public!

thanks jeff, your posts are always amazing. thanks again and may God bless you

one of the best if not the best youtuber in Civil3D ...

Thank you for making this amazing video. This is gold!

Fantastic information presented clearly. Thanks for the links at the end. I've been looking for a good way to add items to our parts catalogs and I hope these do the trick. Like others have said, I believe you are the best C3D instructor. Thanks for teaching.

You're videos are amazing, I've been watching them for a couple of years now and always learning a lot! Thank you

hey Bartels very well done, since a long i was waiting for your tutorial on pressure networks. at last, you came and as usual, came perfectly.

It's a great and very helpful video. Thank you, teacher!

Excellent presentation Jeff. Just what I was looking for. Thank you.

Wouaw great tanks again my ultimate professor whith in civil 3D👍🏿

wow i was waiting for so long for this hope the pipes under gravity networks networks too if you have a full curse for it i would like to buy it Sir Jeff 😊

LITTERALLY the best explanation of this process out there. I work in landscape and use pressure networks to model irrigation lines. Kinda clunky but an able to export to Revit for clash detection. Any vids on modifying catalogs to expand pipes and fittings to smaller sizes?

Dear Jeff, thank you very much for your videos! It would be great to take your research a little further and consider adding a channel or trench to this network, such as a corridor. Also, a few words can be given to the creation of catalog items. For myself, I learned how to create large catalogs of elements for thousands of elements using a combination of SQL, Excel and Dynamo. I think your viewers would be interested in such material. Best regards and respect =)

Great & Thanks Jeff :) Looking forward to learn more things in pressure networks

Gracias Jeff

You're videos are amazing,Thank you

Dear Jeff, please can we have a tutorial on Drainage analysis and sewer design in Civil 3D?

Thanks my best teacher

Jeff Bartels is a god.

Excellent presentation Jeff

Thank Mr Jeff 🙏

Congratulations for the video, it is really interesting and very clear. I was wondering how, once the network has been modeled, it is convenient to model the excavation

awesome as always, tyvm. own u alot

Excellent presentation

You are the best

Great video, so helpful. Sir, it's possible to share with us the tamplate used in this video?

Welcome Back Jeff

Hello Jeff, can you please add content for creating arch pipe profile for parts list ?

I always find using the pressure networks pretty finicky and frustrating. Especially when having lisp routines autoloaded in before even setting the network catalog

Great video! I am currently learning how to work with pressure pipe networks myself. I have one set up with a profile and I am trying to do those vertical deflection edits like you did around 32:30. My grips seem to copy the style of the grade line and when moved, do not actually make the pipe change at all. Do you know why this is the case or how I can make them deflect the pipe?

As sharp as knife in your notes, i have one question Jeff previous version of C3D allows you to control the allowable deflection angle of the pipe, but in 2023 i cannot see that option, does ADSK remove it?

Thank you very much! @Jeff Bartels

Great vid. Thank You! One more thing… Is there a way you can label N-E coordinates of CL in section view? Please help us.

Very Very good 👍 Thanks for you

Hello! Awesome video, thank you! 1question, your pressure line we caqn se the center line and the pipe walls in top view, in my civil 3D (2024) only i see the center line, no walls, and the elbow also just 1 line...how can I set it so that I can see this multi-line drawn pipe?

Is there any way to view and label the Invert levels of the pipes at the cut lengths start/end in the plan and profile views? Obviously, it's been made as one pipe with one start and end point whereas in the middle they vary! I am trying to adapt this procedure but I believe if this didn't work I cannot! Thank you Jeff!

Sir Jeff Bartels I Persnoly Request For You About Part Builder in Autocad Civil3d Toutrial Please Upload the Complete Video Series Part Builder Structure Catalog How we Use and Understand The Basic Tools For Example 1 Part Configuration . 2 Modeling > Work Plan > Modifiers > Auto lay Data > Modal Parameters 3 Size Parameters > Bdy >Len I think You understand my question because there are basic Things That must be known by every person before creating any Structure Objects. I think You have a Good Grip on Infrastructure Projects and all components used in Gravity Pipenetwork and Pressure Pipe network also made a very impressive impact on your CV. Happy Ramazan ♥ God Give You and Yours Family a happy and Healthy Life, Ameein.

can you show me modify pressure network when we change layout of network ? may be next video sir? I have some config with tee in it.

Its not appearing joints coupling but in standard mode working and how can solve it?

Hello sir. When I open pressure network creation tools my reference surface option is disabled unlike yours

Thank you so much

I have civil3d 2022. i dont see how to turn off compass snaping

Thanks a lot

Thanks a lot of for this video.i have a question, when i drawing pipeline than it coming ( 11.25,22.5,45 and 90 degree) snipping mood but also i wanna use 1 or 2 degree sometimes, how can add (1 and 2 degree ) ?

✌✌Attractive Videos👀

I typically work on a lot of long transmission lines. I have been using the old parts based pressure networks and am just getting into and liking the pressure pipe run work flow. Do you see any issues working with long pipe runs - I am currently looking at a 10 mile long 16" water main.

when i cut length in profile of pressure. slope of each pipe don't show on band set. Can you hep me?Thank sir

Simple direct Loved it after i watch the video i searched if you have made a video about sewer pipe network i didn't find if you made a video please reply to my comment

Jeff, in my drawing I need the flange elevation set at 4 inches above grade. How do you get that to set with these pressure pipe hydrants? Is it a case that now you just have to play around with bury depth dimension and get it close?? There has to be a better way.

Thanx❤

Hello Mr. Bartels, What if i do not have any Suface to select? Is it important to have a Surface to draw Pipelines? Thanks in advance.

How can i add a vertical Tee in the new pipe runs

THANKS SIR JEFF

Will each of the cut lengths need fittings typically?

If you have a network that has a 90deg bend and you end up needing it to continue straight (tee connection) how do you do that?

Thank you very much for this wonderful video, I would like to ask you about details profile if you could help me how to create band invert levels? Please🙏 Sir send me any link if you have Thank you

Tnx mr jeff ✌️❤

Any way to model a 90 degree vertical bend with the new pressure network path tools?

hi...plz how can i design loop and ramp to 2 road in the bridge part in infraworks 2023? can u help me because i need it for graduation project

Hi mr jeff do you also provide professional training of civil 3d.?? Let me know

We still have some issues displaying bends the way we'd like to. Also 90deg vertical pipes lose their visual diameter. They just appear as a line, which is weird.

¿How do you configure the bands for a network pressure profile?

What if I created the pipe network with pressure pipes ? I an trying to edit in profile and it doesnt let me

Hi Jeff. I am wondering if there is an easy way to rename pressure networks? I know there is a way for pipe networks but that doesn't seem to work for pressure networks.

👌🏻👏🏻

How can I change Pipe Sizes to mm, please? Thanks

In the Pipe Run Profile Settings you mention the Reference Profile is a surface profile. Can Layout Profiles be used or Surface only?

BUT THE REDUCER NOT WORKING PROPERLY

Im working Parsons international uae abudhabi office. Here using civil3d creTe modeling for network

Thank you for making this amazing video. This is gold!