Getting Started with Your Sentro Knitting Machine

No video

Getting Started with Your Sentro Knitting Machine

Рет қаралды 22,953

Жыл бұрын

This video demonstrates the basic use of a Sentro 40 pin circular knitting machine. In this 15 minute video I give detailed instructions for casting on and simple casting off a tube that is knitted in the round. While this demo is made using a 40 pin machine, the same steps will apply to the 48 pin machines as well.
Sentro 40 pin knitting machine:
amzn.to/3Dx65O2
Hand held row counter:
amzn.to/3Dx9gVP
Sentro 48 pin knitting machine:
amzn.to/3HpHzQ6
Clover 3160 Darning Needles with Latch Hook
amzn.to/3HLxqi3
www.michaels.c...
----------------------------------------------
Music: Hold On by Markvard is licensed under a Creative Commons License.
creativecommon....
Support by RFM - NCM: bit.ly/3Jb7nlB
-------------------------------------------------

Пікірлер: 33

@katequinn7430 4 ай бұрын

Thank you for this great video. Never would have figured it out from the instructions with the machine. Just need to practice

@honeylacecookie 2 ай бұрын

😊Thank you so very much for taking your time to help a newbie here learn. I have been hoping to find a tutorial that will allow me to learn. I am elderly and having a hard time using my knitting needles and with my grandchildren coming along I have been struggling to make them the little things that I want them to have. ( warm winter clothes for Canadian winters) Thank you again you are amazing ❤🇨🇦

@IrmaYanez-nw5ue Ай бұрын

Thank you! Thank you! 🙏🏻For showing us how to use this machine. 😮 I bought it on offer up it was used and, with no instructions, so I was driving me crazy , figuring out how to use it. Very well explained , even though my first language is Spanish , I understood all. God Bless You. 🙏🏻

@hermeitus Ай бұрын

Thank you so much ❤

@KenzoAdriaque 3 ай бұрын

THANK YOU VERY MUCHH, FIRST TIME I DID IT WAS A MESS , but when i saw this video i have now did it rightt tysm!

@dorothylavell3038 5 ай бұрын

I have just purchased one of these with the 48 pins. I am having a lot of fun and moments of complete frustration, but I have been persistent, and I have now completed two beanies. One with a pompom and one without. Thank you for taking the time to produce the content that helped me understand how to use this machine. My husband loves the beanie I made him. 😊

@lonestarcraftercompany2620 5 ай бұрын

Thank you for sharing. It took me viewing several videos and trial and error to figure this out. For me it was the overhead views that was causing the most confusion. I hoped that showing this from a different angle would be helpful to others as well.

@dorothylavell3038 5 ай бұрын

I found doing a slip knot on that first pin to be extra helpful for me. It was a tip from another channel that helped me to get and keep it onto the needles on the first few turns. I have bad joints, and it helped make casting on easier. I'm glad you did the review on all of the machines. I'm looking forward to watching what you do with the small 8 needle one.😊

@mistyhackathorn6154 Жыл бұрын

This is awesome! Thank you so much because I had a hard time with other videos also and this actually got me started with my knitting machine. Good job

@auroradelaguacate4153 5 ай бұрын

Thank you for this video. I was at the point of returning the machine thinking it was defective. I had bought it from a reseller of returned goods. And got to thinking that it had been returned for a good reason. One last shot before returning it… KZfaq trouble shooting. And found your video. Yes, the instructions pamphlet has a cast on video, but nothing in the written instructions makes mention of the necessary back and forth every other tooth yarn movement. Thank you. You made a difference in making my day better.

@melanieshipman8081 4 ай бұрын

This was really informative. Thank you so much it helped me set up and get going with my knitting machine.

@HJKelley47 Жыл бұрын

The beginning needle is the one that is a different color than all others. In your case it is the "Black" needle with all other needles being white. On my 48 needle Sentro the color of the #1 needle is "white", with all other needles being pink. You can purchase a row counter for your 40 needle Sentro. It does count the rows for tubular knitting. You will have to keep a row count for panel knitting.

@lonestarcraftercompany2620 Жыл бұрын

Thank you for the comments. I have a 48 needle Sentro, but sadly I haven’t even opened the box yet. I knew the needle colors are different just from the KZfaqs I’ve watched. I had no idea there’s an add on row counter. That would be quite helpful!

@raquelreyes8573 5 ай бұрын

oh my god it is cool you will like it very much well thank you for your pompt reply blessing good luck with your new toy lol

@lonestarcraftercompany2620 5 ай бұрын

I need to take a look at it. Thx for the suggestion!

@suestrouts3846 3 ай бұрын

After I get it started about 3 or 4 rows then it starts dropping stitches alot can't figure out why

@EmmaDoodoo-bu4fj 14 күн бұрын

Real

@daniellefung6554 7 ай бұрын

Thank you

@dwaynettetaylor8822 3 ай бұрын

Thanks a lot

@insertnamehere9154 22 күн бұрын

❤tfs

@janejameson1429 3 ай бұрын

I can not get this even threaded! . So disappointed! Help! What do I do? I

@raquelreyes8573 5 ай бұрын

i am a biggner with the sentro knitting machine i have 48 pin machine the problem is i have try to cast on but the yarn keeps coming off when i turn the handle what am i doing wrong i look but it seems that it is right but i crack the handle the yarn is not taking can you please tell me what to do i was seeing your video and casting as you did thank you for your video

@lonestarcraftercompany2620 5 ай бұрын

Without seeing how you're doing the cast on it's really difficult to answer that question. I wish I had a better response.

@raquelreyes8573 5 ай бұрын

Thank you so much for your prompt reply i do understand i kept trying and did it however i would like to know if you have worked with the addi express 22-pin the one i have makes a crackling noise in the handle and it seens when i am turning its a litte wobbly and my row counter is not working either i what to try and fix it thank you so much for your video have a bless day

@lonestarcraftercompany2620 5 ай бұрын

@@raquelreyes8573 no I haven’t. The one I was using in the video is the only one I’ve used. I bought the bigger one but haven’t needed to take it out of the box yet.

@MarleyHigbee-ok8yf 5 ай бұрын

I did exactly what you did but at the end when I tried to stitch it it didn’t it just fell apart

@janec812 5 ай бұрын

I just received my Sentro 48 hook/pin. I have never used the machine so I thank you for making this video. I have subscribed and am looking forward to learning from you.

@emanueliosub4084 4 ай бұрын

For me It Locks lagy

@sky_luv879 5 ай бұрын

DID NOT FREAKING WORK.

@KenzoAdriaque 3 ай бұрын

Maybe u did not do it right

@allievinci 20 күн бұрын

So complicated to put on you should’ve started the beginning

@davelee4994 Ай бұрын

thank you so much for the tutorial very great help as i'm a beginner you can make some fantastic stuff with this machine so thank you so much dave

@lonestarcraftercompany2620 29 күн бұрын

congrats. I'm glad this was helpful. I struggled at first with other tutorials mostly because the camera was directly above the machine. I had a hard time seeing what was happening.