Thanks from all us dads that have had these thrust into our face!

Thank you, thank you, thank you!!! After a year of not having a GHD I decided to order the parts and try to fix it myself before buying a new one. Within 15 minutes it was done, thanks to your tutorial. Very easy to follow. You're a wiz 👍

My friend offered to fix my straighteners but they returned them saying that my GHDs were unfixable. I was going to dump them down the tip but thought nothing lost if I have a go myself. I found your video and now they are working just fine. Thanks for a clear instruction video. Absolutely brilliant!!!!

Repair tutorial as it should be done, complete, every step shown from start to finish.

Brill video! Thanks I followed it stage by stage and job done! Thanks

THANK YOU :). Fixed it easily, even though i was scared i was going to break or lose something by taking it all apart. (Especially the spring. I always worry when things have those, but its actually really easy)

thanks for sharing. very clear instructions wonderful

Thanks for the video, fixed it in less than 10 minutes.

Great no nonsense video thank you!

Excellent tutorial. Made the job simple. Thanks 👍

Hero, easy and quick thank you so much mate.

nice, clear demonstration. thank you.

I’m opening my ghd that has never had repairs and it has a mark line on the same place you recommended and is filled with white powder remnants I have a feeling somebody used the straightener to smuggle drugs.

Hab zwar kein Glätteisen, das Video finde ich aber trotzdem klasse!

Спасибо Вам.Коротко,ясно и понятно.Dankeschön

Exactly what I needed, thanks!

Excellent tutorial

Excellent! Thanks very much! Saved a few quid :)

Great help. Thank you so much. However, I now have a spin and curl iron and the cylinder is not rotating. Any idea as to how this can be taken apart and fixed please?

Tea has got on my ghd glide ...will I need to open it up to clean it ?

Hello good, watch my plate I give light and turns and a constant beep and the light will start to Flash and does not heat anything. Now if I warm up a little ceramic with hands or divider works well, creaks a bit a ceramic. As this very cold makes it beep hot works perfectly. I hope that you can solve it, a greeting and thanks!

Hello I love your video I'm wondering if I have a gh d with two holes in the cord is it nessasrly fake ??

My girlfriend has some GHD SS5.0 and the dog has chewed through the mains cable, I have ordered a replacement external cable with the pin connector on the end from your Amazon store, I don't need to replace the internal cable as well do I ? You seem to do both in this video ? Thanks in advance.

Thank you so much. :-)

Do you also carry cords for my one 'n one curling iron by argan heat

Hi. My GHD use to work just fine just out of nowhere I tried turning it on and it just wouldn't turn on anymore. What could be the problem? the cable or some fuse?

Hi, I've got the Jamella Pink 5.0 ghds. They were working perfectly fine and then one day I went to switch them on and they just wouldn't come on or make a noise or anything. My dad has had a quick look and says there is power going in, but nothing coming out. Could this be the thermal fuse? And can I purchase one from your shop? Missing my straighteners so much lol! Many thanks, Shann :) x

URGENT: My senior prom is tomorrow!! Please please help me😰 I have a ghd gold proffesional max straightner. I have two problems 1. It keeps going on and off on its own, in other words.. It keeps beeping. And 2. It makes this buzzing/sizzling sound 😰

If I don't have the cable and I cut the female cable part and joint to direct then what will happen

I need to replace the cable on my GHDs because my dog chewed it. Do i need to replace anything else or will the new cable fit the excisting cable socket?

I want link sperpat catokan ghd gold

hi my ghd jamelia edition heat comes on but the led light doesnt and it keeps making the turning on noise what could this be?

I’ve fixed my straighteners but when I put it all together, but the two irons are sat two close together almost to the point where I can’t get my finger in to switch the iron on, any ideas what I can do? I’ve screwed everything in g down so I can’t think of why it’s not sitting apart enough

La plancha que tengo cuaaamdo prende el les parpadea medio calienta y se apaga

I have a spring like hinge and I don't know how to put it back.

Hi, I'm trying to fix the same/similar model to the one in your video and have found there is power going in and out of the straightener, fuse is working fine. However, nothing happens with the straightener when it is switched on. No led, no heat and no sound. Just doesn't seem right. Would there be an issue with the circuit board? Any help would be appreciated. Thanks, Tom

Where can I purchase the new cable socket

where do I buy the new socket

hi there, my ghd was not heating so my husband changed the thermo fuse and now its "over heating" do you know what needs to be replaced as well?

Ta pal, r lass loves me again.

Where did you get the cable socket?

how to test if cable broke on ghd

hi.may i ask on how to fix my flat iron straightener that cut of.or it has cut

Hi I think the switch has broken or something under the switch on the circuit board on my mark 5's as it makes the noise if you keep pushing it up and down, but the light doesn't stay on or heat up. Do you do repairs, if there sent to you? Many thanks Hayley

No aparece el daño que nesecita solución 🤔

Hi...I need price on the GHD cable

Do you sell cable sockets, thanks Brian.

Hi, where do you get the parts from?

these hair irons are so expensive and I have 2 that don't work because of faulty cables. I mean really? there should be a recall

Don't put the straighteners between your legs you will stab yourself. Put them in a clamp. I when through me finger when the screwdriver slipped. Luckily I did not go through my leg.

please ans my question.please pleasr