No video
GibbsCAM TMS (Tombstone Management System)
Рет қаралды 1,795
Күн бұрын
@powershop1903 4 жыл бұрын
COOL MAN ! Thanks for sharing and taking the time to make these videos!
@Itspronouncednuclear 4 жыл бұрын
Hope this helps !
@Jimmy-bm5jg 3 жыл бұрын
Hi, can we use TMS on vertical 4 axis machine and post out with dynamic cs …I ‘m working on horizontal local …post came out no problem but for vertical CNc , post came out like local and I have to select my work coordinate my self with new gibbscam version.. so I would like to know if TMS working on horizontal … can we have an post same on vertical … thanks
@GibbsCAMVideoTutorials 3 жыл бұрын
Yes, you sure can have TMS for a vertical 4-axis, but if you also want to use Dynamic Fixture Offset you would have to have the post department add that to your post, but with the cost to already add TMS that can be added at the same time.
@Jimmy-bm5jg 3 жыл бұрын
@@GibbsCAMVideoTutorials thanks you , I have the post for okk 4 axis horizontal axis is really function good with all variable wfo …. I just build a new 4 axis for vertical … and the post is give me a hard time to working on with a new version off gibbscam … I have to select my self of WFO like G54.1 P1 … but when I select G54.1 P1 …the position is change to different value of center rotation and not local versus global…and the sub program call in sub program the cnc give me alarm …
What the Meowk!
Рет қаралды 9 МЛН
Daystrom Technologies - GibbsCAM Info
Рет қаралды 1,8 М.
Port CNC Inc
Рет қаралды 36
KULI TECHNIQUE
Рет қаралды 7 М.