Gktech Z33 350z Rear Subframe Slip In Collars

Gktech Z33 350z Rear Subframe Slip In Collars - Install

Рет қаралды 5,102

Күн бұрын

The GKTECH Z33 350z/G35 rear subframe collars are used to eliminate axle tramp and to also tighten up the rear end giving more precise control of the vehicle under harsh driving conditions. The OEM bushes are designed more for comfort than performance and by filling the voids within the factory subframe bushes it makes the subframe much more "as one" with the car. Noise isn't drastically effected compared to going to solid subframe bushes and these inserts are far easier to install than going to a solid subframe bush.
- 8 Piece Set
- Manufactured from a proprietary 90sHA material
Vehicle Compatibility:
- Nissan Z33 350z
- Infiniti G35
- Nissan V35 Skyline
Australia/ International
au.gktech.com/z33-350z-rear-s...
USA/ Canada
us.gktech.com/z33-350z-rear-s...
Timecodes
0:00 - Intro
0:32 - Unboxing
0:37 - Features
1:07 - Bushing Demonstration
1:18 - Bushing Lubrication
1:41 - Support Subframe
1:46 - OEM Parts Removal
3:08 - Top & Bottom Bushes Install
4:01 - OEM Parts Install
5:42 - Outro
Show some love to the Gktech boys
Zac/ZACBLOGNAR
Dan/DANBROCKETT
Josh/JOSHFILMS
John/CASADECAPS

Пікірлер: 25

@moho4225 2 жыл бұрын

The bottom rear bushings on my g35 did not want to slip right in. A lot of lubrication and and impact gun helped a lot to get them to seat into position. It seemed like only one side of the bushing insert was having clearance issues but using the factory washer to tighten them into place did the trick. Don't forget to lube those thangs. I'm happy with the results and ease of install! Great product.

@gktech 2 жыл бұрын

Thank you for the feedback!

@FrickenHamster Жыл бұрын

I had the same problem. I think the rubber bushings break down over time and the inner part of the bushing shifts to one side. I was able to get it in by hitting it in part way with a deadblow, then torquing it down with the black part. No need to impact, it went in easily. I'm already on solid diff bushings and I do notice a bit increase in noise, but I also installed coilovers so not sure how much these contributed.

@lindyforriest6461 3 жыл бұрын

love video and product did mine 48hrs before video posted but thanks.

@FrankTheKoyFish 3 жыл бұрын

I still do not own any vehicles you make products for but the entertainment is wonderful

@andrescastano1729 9 ай бұрын

You’ll need mm sizes 12, 14, and 19. That is all :)

@randydrifts Жыл бұрын

I am wondering if these would work if my bushings are worn out and possibly damaged would this stiffin them up? Or do I need all new bushings?

@gktech Жыл бұрын

Very helpful for worn bushings, does wonders to be honest.

@randydrifts Жыл бұрын

@@gktech awesome thank you!

@hernanmurillo8925 3 жыл бұрын

Do these work for aftermarket bushings?

@gktech 3 жыл бұрын

They are only designed to be used with the OEM rubber bushings.

@gursimarsingh5893 3 жыл бұрын

Do you guys make these for the 370z?

@gktech 3 жыл бұрын

They are on their way, feel free to send us an email to get on the waiting list!

@FrickenHamster 2 жыл бұрын

How do these compare to metal collars?

@gktech 2 жыл бұрын

We have found near-identical results, with a little less vibration!

@drizzetsrevenge 2 жыл бұрын

Damn, ya'll straight up ripped off Z1

@gktech 2 жыл бұрын

Hey there, whilst multiple brands share the same concept ours is definitely not the same. For starters, we provide an 8pc kit which ensures's minimal movement in the OEM bushings and we've made them from 90sHA polyurethane so that there is no increase to NVH.

@drizzetsrevenge 2 жыл бұрын

@@gktech the Z1 kit is also 8 pieces...and looks identical. Come on, just admit you knocked it off.

@463mafia 2 жыл бұрын

@@drizzetsrevenge so what? They took the same design and made it even more better without introducing NVH. It is like saying other companies make air intakes similar to Z1. It can look exactly the same but material is always different. Why reinvent the wheel when it is already done.

@BlackWhite-jq7wu 2 жыл бұрын

I have both kits, The Z1 is aluminum & Gktech are made out of polyurethane. Both unique in their own righteousness. Competition on similar products breeds better products dumbass

@ImEnhalos Жыл бұрын

you should want competition in any market