Glazing Combinations and Glaze Results - Unloading the Kiln! Day 9 Quarantine Distraction Video

Рет қаралды 59,747

Күн бұрын

Coronavirus Quarantine: Video 9
I will be trying to post simple daily videos for inspiration for my students, and my subscribers to help give us some learning and distraction during this national emergency. Here is a link to the playlist I am adding to: • Online Learning During...
This is a follow up video to my application video seen here: • Glaze Application and ...
Here's a link to my patty video! • Making Patties or Cook...
or this one which starts partway through a video! • Glazing the Ceramics I...
In this video, I show the unloading of the kiln of several glazed bowls for our local empty bowls event (which is now postponed)... I am using the following glazes in this video:
Coyote Gunmetal (In the Archie’s base series- I use only on rims, and over another glaze for stability to prevent shivering (chipping due to different glaze fit with my clay) Very runny when overlapped, and beautiful on rims!
Coyote Blue Purple (In the Archie’s base series- I use only on rims, and over another glaze for stability to prevent shivering (chipping due to different glaze fit with my clay) Very runny when overlapped, and beautiful on rims!
Coyote Black
Coyote Steel Gray Shino
Coyote Shino
Coyote Light Shino
Coyote Desert Sage (very shinoish)
Coyote Cobalt
Coyote Baby Blue Satin
Coyote Lapis Satin
Coyote Licorice (Two Step Undercoat)
Coyote Sea Mist (Two Step Overcoat)
Coyote Marshmallow (Two Step Overcoat)
Coyote Blue Moon ((Two Step Overcoat)
Laguna Moroccan Sand MS 15- Robin’s Egg
Currently, none of these are available on Amazon. If you are looking to purchase, I recommend Cornell Studio Supply in Dayton, Ohio
8290 N Dixie Drive
Dayton, Ohio 45414
Fax: (937) 454-0397
Tel: (937) 454-0357
cornellstudiosupply@gmail.com
cornellstudiosupply.com/
Feel free to call- they are super-helpful!
Check out this link to a live searchable Googledoc I continually update with lots of my favorite tools on Amazon using my associate links! (also some non-amazon suggestions on here!)
docs.google.com/document/d/1X...
You can also check out my Amazon Influencer Store Here: www.amazon.com/shop/karanspot...
I am a public high school ceramics teacher at William Mason High School in Mason, Ohio. (Mason is currently the largest high school in Ohio!) As a potter, I have been working in clay for over 30 years, and I have been teaching for over 28 years, the past 20 have been specifically teaching high school ceramics. I love what I do! I have my own studio in my home basement, where I work on my personal pottery for my Etsy site; www.etsy.com/shop/KaransPotsA...
I started my KZfaq channel a few years ago, to make videos to help my students if they are absent and miss a demo, or if they would like to explore more advanced techniques independently. I have been amazed to reach such a wider audience than my own students!
Please subscribe to my channel if you would like to receive channel updates, or would like to learn more about clay and studio processes!

Пікірлер: 120

@shannonwhiting6668 4 жыл бұрын

Great video! I just ordered some of the Texas Two Step glazes. Can't wait to play with them. Thanks for your fun videos!!

@mreinstein48 4 жыл бұрын

The result is gorgeous! I love the kilns openings!

@julipolito7761 4 жыл бұрын

Oooo! Great results, Karan! I love that gunmetal and shino with crystals! Well, all of them, really! Thanks for sharing! Juli in Tucson 🌵🌵🌵

@bradellison1345 4 жыл бұрын

I really like all of the glaze combinations, we have similar taste. Thanks for sharing!

@BrokenArrowPottery 3 жыл бұрын

Beautiful combinations! Especially that black w/ dessert sage. Thanks for sharing!

@ArtByJodiBauter 3 жыл бұрын

Those colors are beautiful! I love the blue ones with the specks and marshmallow white color.

@butchrambish7835 2 жыл бұрын

I really liked your glazing videos. I'm 63 and getting back into pottery after a 15 year hiatus. It was a late in life start to a hobby but I loved doing it with my late wife. She had taken pottery in college and I got her back into it after some medical stuff as a diversion. I asked her to show me how to throw and it was Katy bar the door after that. I still have the recipes I got from my instructor in Northern Virginia in the early 2000's but would like to expand a little and some of your glazes looked great. I'm looking for sources for recipes (books, subscription etc.) Thanks again for the great videos.

@rosievondollen6461 2 жыл бұрын

Thank you Karen for your reply. I was delighted last night to come across your video. Your work is very nice and educational and I love it. It was fun to see how you summarized and put everything together that was perfect. I fire ^5,6 electric and also I do ^10, gas reduction in my garage studio. I love learning from other potters. It’s a real treat thank you very much. I like that Texas two-step I’ve never seen that before. keep up the good work you are a great teacher.😘

@KaransPotsAndGlass 2 жыл бұрын

Thanks for the kind words, Rosie!!

@shannonforpresident2282 4 жыл бұрын

Really beautiful combos!

@davidaddy1396 4 жыл бұрын

Great to see the finished results. We’ve never covered grinding out mistakes so really looking forward to seeing how you can fix any niggles

@KaransPotsAndGlass 4 жыл бұрын

Here's the link to that video! kzfaq.info/get/bejne/r5dglrCBtsmWqGQ.html

@Majoofi 4 жыл бұрын

I'm looking forward to the grinding.

@sheilacarroll3981 3 жыл бұрын

Good info, thanks for posting

@Ninasucculents 4 жыл бұрын

You are amazing, love them.

@KaransPotsAndGlass 4 жыл бұрын

Thank you! Cheers!

@julzc016 Жыл бұрын

OMG I wish I was a student in your class this is epic!! Thanks

@tiffanyharnish2818 2 жыл бұрын

Just beautiful

@britoronto6628 4 жыл бұрын

really interested to see grinding!

@johnstride9642 4 жыл бұрын

Not glazes we can get in the uk I think...but very interesting. I do like the idea of patties....I’ll certainly make a load of those!

@edsonbest4416 4 жыл бұрын

Amazing

@CarolLeePhotography 4 жыл бұрын

Thank you!!!

@nikahartgers3502 3 жыл бұрын

Hi! I need some help. I want to switch to once firing. Do you have any tips how I can limit risks on having damage on my work? I hope to hear from you soon! Thanks

@b.o.p.9842 4 жыл бұрын

Love your work! Very inspiring! Wondering about the pottery "caddies" for placing pots on during the glaze firing..... Are they just thin slabs of bisqued clay? Thanks! Pat

@KaransPotsAndGlass 4 жыл бұрын

Yes- Stoneware is what I use for my patties! Here's a link to my patty video! kzfaq.info/get/bejne/p62FgrCJsdKngXk.html or this one which starts partway through a video! kzfaq.info/get/bejne/n7-Zgq2Dq-DdiY0.html

@2011Mamamia Жыл бұрын

Bonsai pots maybe a great item to make!

@KaransPotsAndGlass Жыл бұрын

Great idea! Saw an amazing bonsai exhibit at the Asheville arboretum this summer and I was inspired!!! Only problem is I don't want to have the work of actually growing them! I can barely keep my existing potted plants alive! LOL!!

@badarnisa4874 4 жыл бұрын

Dear Karan kindly do explain about Clay , which Clay you use and which Clay and Glaze is food safe . You are doing fantastic job . Stay Blessed Always

@karri8998 4 жыл бұрын

Love your videos, thanks for sharing with all of us. Do the glazes run because they are layered or is it the type of glaze? Your work is so beautiful.

@KaransPotsAndGlass 3 жыл бұрын

Both!

@robertcole1098 4 жыл бұрын

Some very nice combos,love that robin’s egg glaze. I think you have a thing with the black ( what does that say about you? Ha ha) what are the patties made of? I thought they were just biscuit fired plates, but not sure, but I do like the way you use them. Cheers Bob 🇬🇧

@KaransPotsAndGlass 3 жыл бұрын

Hi Robert- sorry for the delay- just saw this! The patties are just stoneware- and sometimes I bisque first, sometimes I just fire raw!

@rebeccaeverett3424 3 жыл бұрын

Those subtle matte square bowls!!! Gunmetal and shino!

@KaransPotsAndGlass 3 жыл бұрын

I think the square ones are Shino over steel gray shino! I love that combination!!!

@rebeccaeverett3424 3 жыл бұрын

@@KaransPotsAndGlass so do I!!! And the shape. The best of the lot, by far!!

@marcelafritzen5198 2 жыл бұрын

hi!! first of all thank you for your videos, they are very informative and helpful. i have a question, at 9:10 on this video you have used multiple layers on the bowls... i love the outcome, and i wonder if i wanted to have the white piece (only) with the black dots, i should go for marshmallow over licorice? would that give me a result of a pure white and black spots on the whole piece?

@KaransPotsAndGlass 2 жыл бұрын

It won't be a pure or crisp black and white- but that combo is lovely. If you want true black with white dots, you may consider application of dots of contrast color with a syringe. I have done that before with coyote white, and coyote black dots, and it works well!

@janethebert7324 4 жыл бұрын

Can you provide information on the little banding wheel that you use? It looks like it folds up. Thanks.

@KaransPotsAndGlass 3 жыл бұрын

cornellstudiosupply.com/product/kemper-tilting-turnable/. Sorry for the delay- just saw this!

@kiddywriter 3 жыл бұрын

Hi Karan...your work is beautiful! I recently glazed a noodle bowl for a gift, and discovered that layering certain glazes can compromise the chemistry of the glazes, and subsequently affect the food safety of the bowl. I was told that I can layer celadons made by amaco without any issues, but am looking for other alternatives to line my bowls with. Any suggestions/advise would be greatly appreciated. Have been looking on line but haven’t found any specific information regarding safe combos. Thank you again!!

@KaransPotsAndGlass 3 жыл бұрын

Hi Mary- I apologize for the delay, I just noticed this comment! I can't speak to the testing of specific glazes- you could reach out to Cara at Amaco- she is really helpful an knowledgable! I often experiment with food safe glazes together in layering.

@elliepapadopoulou6680 Жыл бұрын

hello! I wanted to ask you if its possible to mix/layer different glazes that are fired in low temperature when used on earthware?

@KaransPotsAndGlass Жыл бұрын

Yes it is possible. But, I would highly recommend testing on a piece before doing it on something you like. That being said, all sorts of glazes have different characteristics. Some may not do well layered. Some may. You just have to get to know your glazes- and perhaps trust the people who do know them! I'm sure some studios may say not to layer- but that may be due to the characteristics of their particular glazes that they use!

@rocioflores165 3 жыл бұрын

Que lindos son tus videos , ojala pudieran poner traducción en español 😉

@saralaitala3857 4 жыл бұрын

Thanks for sharing your nice results with the Coyote glazes. What clay body are you using?

@KaransPotsAndGlass 4 жыл бұрын

Those were done at school using Standard 153! I use Coyote in my home studio too, with cone 6 bmix, and cone 6 bmix with grog

@craigkapson7256 3 жыл бұрын

I am new at pottery and wondering if you sell templates for a slab measurements to make bowls, mugs, etc

@KaransPotsAndGlass 3 жыл бұрын

I currently don't sell any - but many of my slab videos do have LINKS in the video description to some of my patterns I have to share on my Googledrive!

@coldfire05 3 жыл бұрын

Hello Karen, and thanks for your wonderful videos!! In your main channel page at the top you have a picture of what looks like coffee Mugs that are orange and yellowish. What glaze combinations did you use and on what clay body? Also what cone were they fired at? Thanks in advance for your reply! Keep up the great work ku'u ipo!! (Ku-u, epO), Hawaiian for sweet heart)

@KaransPotsAndGlass 3 жыл бұрын

Hello! The glaze you can see in the photo is Coyote Shino- probably a little thick in application, as it often doesn't have the lighter cream spots when I apply. Fired to cone 6 (cone 5 actually with a 25 min hold)

@KaransPotsAndGlass 3 жыл бұрын

On Laguna B-mix with grog

@mgc1183 3 жыл бұрын

Your students are lucky to have you as their instructor! Can you explain how you fired, please? I love the results!

@KaransPotsAndGlass 3 жыл бұрын

Here’s a video where I address firing glaze work! Prepping and Firing a Glaze Kiln to Cone 6- Part 2 of 2; Quarantine Distraction Video Day 43 kzfaq.info/get/bejne/mc9kbJBmksmtdpc.html

@anuagarwal751 3 жыл бұрын

What kiln do you use ? A regular electric kiln or anything different ? And what cone are these fired at pls ?

@KaransPotsAndGlass 3 жыл бұрын

These are fired in oxidation- an electric kiln to cone 6. As per Coyote instructions- I fire to cone 5 with a 25 min hold- equivalent to cone 6!

@elizebuchler8047 3 жыл бұрын

Just wonderd if the Shino glazes are goods are.. they are so beautiful and the black is stunning does that seal the glaze more.. wondered about your thoughts on that

@KaransPotsAndGlass 3 жыл бұрын

The Coyote brand are sold as food safe when properly fired!

@elizebuchler8047 3 жыл бұрын

@@KaransPotsAndGlass thank you for your feedback.. I find your way of giving advise so complete!

@delilah8205 3 жыл бұрын

OMG ! I fell in love with 2/3 steel shino and shino! Is there any chance to buy these glazes in Europe?

@KaransPotsAndGlass 3 жыл бұрын

I am not really sure Delilah!!! Contact CoyoteClay to see if they have any distributors! :) www.coyoteclay.com/

@delilah8205 3 жыл бұрын

@@KaransPotsAndGlass Thank you very much, I will. I love your works. Regards.

@DyAnnJacobs 3 жыл бұрын

What is it you are putting under the pieces so they do not stick to kiln???? Thank You

@KaransPotsAndGlass 3 жыл бұрын

Patties! If I reuse them I make them thicker and kiln wash them! kzfaq.info/get/bejne/p62FgrCJsdKngXk.html

@franklogan7557 3 жыл бұрын

I live in the uk ,your glaze results are fantastic .do yo have the address of the manufacturer .Regards Frank logan

@KaransPotsAndGlass 3 жыл бұрын

www.coyoteclay.com/. located in New Mexico, USA

@marypeterson1011 4 жыл бұрын

How far down did you take the second color (Desert Sage) over the black glaze?

@KaransPotsAndGlass 4 жыл бұрын

Over the entire thing- dipped equally over the whole thing!

@marypeterson1011 4 жыл бұрын

@@KaransPotsAndGlass Thanks! As a possible idea for your Robin's Egg glaze issue . . . I have used Robin's Egg over glazes (Amaco Ironstone is amazing under it) and found that only taking it down 1/6 from the top, or less, works well. I really enjoy your videos!

@iremkalayci1626 3 жыл бұрын

Which cone did you use here? Cone 6?

@KaransPotsAndGlass 3 жыл бұрын

Cone 6- which is cone 5 with a 25 min hold

@igotbit9454 7 ай бұрын

How do you make the flower shape on your cups

@KaransPotsAndGlass 7 ай бұрын

This is the technique in bowl form! Throwing a Split Rim Bowl with Squared and Flower Alterations kzfaq.info/get/bejne/etSaeL2lm7_JhGQ.html

@lynneyoung800 4 жыл бұрын

I’ve been seeing ‘peacock’ glazed bowls and there is a video on glazing one - but I can’t find one on how to make the bowl, please can you do one while we are in quarantine? Thank you 😊

@KaransPotsAndGlass 4 жыл бұрын

Hi Lynne- sure! Do you have a specific type of bowl you are looking to make? Wheel/handbuilt/slab/coil, etc? Here is a basic playlist of many of my videos which show bowls just in case that may help! But, I can always do a new version! kzfaq.info/sun/PLj0pNzEmvM_ozrqx7u9cpfBpvkO2Hae7j

@lynneyoung800 4 жыл бұрын

KaransPotsAndGlass Thank you! You did a video on a wheel thrown ‘simple’ bowl which would be perfect. I so appreciate all the quarantine videos you are putting out as I’m not allowed out any further than the garden so potting is keeping me sane!

@schulzattack 3 жыл бұрын

How do I throw the flower bowls? I’m in love!!

@KaransPotsAndGlass 3 жыл бұрын

Here is a video on how I threw those! kzfaq.info/get/bejne/etSaeL2lm7_JhGQ.html

@rosievondollen6461 2 жыл бұрын

What clay do you use and what cone? Love your video❤️

@KaransPotsAndGlass 2 жыл бұрын

Hi Rosie- I typically use cone 5 bmix for my personal stuff. This video was a school clay, which is very forgiving for the kids, it's standard 259- which is a cone 6-10, and has an absorption a bit higher than I really want, so I am planning on making a switch to just a cone 6 clay for classes. The thing I like about that, is it is forgiving for students, and takes refiring to cone 6 multiple times without issues of bloating. I am contemplating switching to Standard 553 - warm buff as a cone 6.

@debrapierce8889 Жыл бұрын

Can you show how to use glass on top of glaze. Have you ever put real gels on your pottery

@KaransPotsAndGlass Жыл бұрын

I don’t ever do that with my students due to the shivering nature of glass on clay. It’s a safety concern as sometimes glass can spontaneously shiver and splinter off! As pretty as it is, I just encourage my kids to try other avenues!

@darrenjackson5 3 жыл бұрын

Can you reuse the patties if there is no glaze on them and they don't break? Thanks!

@KaransPotsAndGlass 3 жыл бұрын

Yes! Absolutely! In fact at home, I make mine a bit thicker and I kiln wash them for reuse!

@darrenjackson5 3 жыл бұрын

@@KaransPotsAndGlass Thanks so much! I just jumped into the ceramics world in the last year. Really appreciate the couple videos I watched of yours!

@barbarac4138 4 жыл бұрын

What are your patties made of?

@KaransPotsAndGlass 4 жыл бұрын

stoneware! Here's a link to my patty video! kzfaq.info/get/bejne/p62FgrCJsdKngXk.html or this one which starts partway through a video! kzfaq.info/get/bejne/n7-Zgq2Dq-DdiY0.html

@anthonyortiz7924 3 жыл бұрын

Pardon my ignorance, but why are individual patties made instead of making a single patty that covers the entire ceramic tray, that way everything is covered and safe from drips and you save time?

@KaransPotsAndGlass 3 жыл бұрын

I apologize for the delay- just saw this. Individual patties were made as it is easier to load the kiln with individual ones, and large ones are harder to store without breaking.

@Rue_pottery 2 жыл бұрын

Hi! Are those glazed food safe? thanks!

@KaransPotsAndGlass 2 жыл бұрын

Yes they are sold by the manufacturer as food safe- check out Coyote Glazes!

@cam9130 3 жыл бұрын

What tape do you use?

@KaransPotsAndGlass 3 жыл бұрын

Hi Cheryl- I don't believe I used tape in this video? I do have another video on taping... and I have links in the video description to tapes available on Amazon! Electrical or vinly tape, white board tape, pin striping tape. kzfaq.info/get/bejne/ldZlhduZkt_RpI0.html

@elizebuchler8047 3 жыл бұрын

If the Shino glazes are food safe.....?

@KaransPotsAndGlass 3 жыл бұрын

The Coyote Brand Shinos are sold as food safe!

@donnacowell7415 Жыл бұрын

Do you reuse the paddies over and over?

@KaransPotsAndGlass Жыл бұрын

Yes- as long as they are clean! I don't always use them, but I do with questionable glazes, or ones I am testing!

@kiddywriter 3 жыл бұрын

Are all your glaze combos in your video food safe?

@KaransPotsAndGlass 3 жыл бұрын

Yes- the Coyote glazes in the video are all formulated as food safe.

@bryetube86 Жыл бұрын

Do you have an email? I was able to throw the miniature teapot by just watching your video and I would like to show you pictures to show how impactful you are to the ceramics community. Keep crushing it!

@KaransPotsAndGlass Жыл бұрын

I do... but based on your channel name, I am reluctant to give it out in comments! ;) I'm concerned what kind of email I may receive... give me yours, and I can reach out!! :)

@edstud1 2 жыл бұрын

Cool glazes, love Karen's videos. Who makes Archie's Base glaze?

@____Ann____ 4 ай бұрын

Coyote

@KaransPotsAndGlass 4 ай бұрын

Thanks for replying, Ann- I hadn’t seen this!

@hirojyukken 2 жыл бұрын

Is this using a gas or electric kiln?

@KaransPotsAndGlass 2 жыл бұрын

electric- oxidation, cone 6

@robertdumoulin4612 2 жыл бұрын

Hi congratulation for your video i have one question what is the brown plate under your potery. Thank you

@KaransPotsAndGlass 2 жыл бұрын

They are stoneware patties! Here’s another video that helps to explain them more! Making Patties or Cookies Under Glazed Pottery and Using Kiln Tickets

@KaransPotsAndGlass 2 жыл бұрын

Sorry- the link is here: kzfaq.info/get/bejne/p62FgrCJsdKngXk.html

@radiobrain94 3 жыл бұрын

Those matte ones are sick

@Maryzlem 4 жыл бұрын

I might have missed it but, are you high fire?

@KaransPotsAndGlass 4 жыл бұрын

Actually midfire stoneware- Cone 6!

@sebsalvarado 3 жыл бұрын

anybody knows what is the correct translation of Shino in Spanish??

@KaransPotsAndGlass 3 жыл бұрын

No idea- I believe Shino is a Japanese word!

@sebsalvarado 3 жыл бұрын

@@KaransPotsAndGlass thnks!

@wadewoehrmann2835 2 жыл бұрын

It was not the amount of glaze that caused the run but perhaps the hold time?? You original had almost no movement.

@KaransPotsAndGlass 2 жыл бұрын

Right- the Archie’s series moves when firing over another glaze. (I apply it with a straight line, and the fluxes in it will make it run) If you put it on too thickly, it moves more. The hold time is normal to get the cone 5 temp to the cone 6. With application of less glaze, it may have been better.

@blakemontreuil1279 4 жыл бұрын

Why not Wax...?!?!

@KaransPotsAndGlass 4 жыл бұрын

Hi Blake... I am not sure I understand your question. I did wax the pots. :)

@KaransPotsAndGlass 4 жыл бұрын

This is the video where I glazed them... and although I don't show the waxing process, I do mention that I had waxed the feet. kzfaq.info/get/bejne/Y79il7uI3Meso2w.html Maybe you are wondering about the areas which stuck?? That isn't because of the wax, that was the glaze application being too heavy, and it ran. Wax doesn't keep glaze from running, it just makes the bottom easier to clean before firing. :)