There is usually a little diagram included somewhere in the instruction sheet(s) of every pattern that will literally TELL & SHOW YOU exactly what each marking on the pattern represents..... and exactly WHERE to place it on your fabric (on the fold, seam line width, single pieces, darts, line up notches), etc... Which is precisely •WHY• it is always best to first thoroughly read over all of the instructions of any pattern in order to well familiarize yourself with both the basic instructions AND exactly what each of the markings on the pattern in the instruction diagrams represent... ●BEFORE● you even begin to do anything else with each pattern. And then also read over each section of your included pattern instructions yet again as you go thru each step so that you KNOW EXACTLY what all you should be doing during each instruction step as you begin measuring, cutting & sewing and then putting your project together as you go thru each step-by-step of the instructions to move on to the next step... until you finally complete the entire project. That way you'll always know best exactly if/when/where you may need to make any alterations to a particular pattern to adjust it for the best fit and outcome.. for YOU.🤷‍♂️

Awesome, I've always wanted to try the Brother Strong & Tough

@@GloryAllan it's niiiiice.

Ikea!

Aye I wish I started sewing at such a young age. So luckyyy!

It was meant to be

Those are great machines.

$20 sounds like a stealll. Buying thrifted machines comes with its risks, but I think if you know what you're looking for and manage your expectations it can be well worth it :)

😂😂😂😂dkmmm rn

i got a brother for $90 the xm3700

I thought singer was the best .

Some of the most seasoned seamstresses are using industrial sewing machines that cost around $1000. $300 definitely isn't the point where you max out, but it's a good price for domestic sewing machines. Also, nothing special about Brother.

😂😂😂 The bigger the better. And if that's not possible.. a clean floor 🤭

​@@GloryAllanyup❤😊

Ouuu i like that, keep up the practice. That's a great habit to take on, you'll learn how to sew so quickly that way.

@@GloryAllan you have no idea lol Since posting I’ve made wallets, cord/makeup brush (wife) rollups, sewed together a canvas back and seat for a directors chair (wife). Speaking of the wife I’ve repaired a few of her dresses as well. Fun journey Now I’m beginning to see the issue with fabric scraps. What to do with them all 😅

Whatever machine you decide to get and use.. which is whatever machine is most comfortable and affordable to YOU to be using at any given time.. is not nearly as important as making sure that you always use the correct size & kind of •SEWING NEEDLE• in your sewing machine for fabrics such as that. (Fleece, knits, etc...) Just about any standard sewing machine is suitable for whatever kind of garments that you want to make.... but if you plan to primarily and mostly be sewing with heavier kinds of fabrics on a regular basis then you may need an INDUSTRIAL SEWING MACHINE instead of just a standard home sewing machine. But if you plan to be sewing with heavier fabrics only occasionally be sure to get a good sturdy older model sewing machine that has mostly METAL parts... instead of one of these modern ones with mostly only plastic parts that will always break much too easily sooner or later and then need expensive repairs and/or part replacements. Older model metal-part sewing machines are always going to be the BEST CHOICE for home sewing anyway, imo. Not only for the investment potential of typically increasing in value the older they get, as long as they are always kept in good working condition, but also because the older models just simply SEW & WORK much better than any of the more modern (mostly plastic) sewing machines do.... that usually need a whole lot more regular maintenance and repairs sooner or later, too. Especially the more "fancy-schmancy" digital and computerized ones that have a bunch of stitch settings on them that you will mostly NEVER ACTUALLY USE that will always need regular steady maintenance and repairs every time the least little thing goes wrong with only •ONE• part/section in that machine which will then mess up several OTHER parts from being able to then working properly, too. Unlike older metal-part sewing machines where the one non-working part on the machine is the •ONLY THING• that usually needs to be repaired, replaced or just simply unclogged to fix it back to proper working order again.🙄🤷‍♂️ However, MOST Vital- You must also make sure that you are always using the ●CORRECT NEEDLE● in your sewing machine no matter what kind of sewing machine that you have and are using... for whatever kind of fabric that you are currently using to sew with. A "Universal" needle is great for sewing almost everything.... but if you are ever going to be sewing Silk, Satin, Organza, Lace, Knits or any other kind of the more delicate fabrics.... then you need to adjust for that and change the needle in your sewing machine to better accommodate for those kinds of fabrics to a needle best suited for that (a smaller sized and much sharper needle) so that your more delicate/fragile fabrics don't end up always getting caught down in the FeedDogs of the machine by a too big/dull needle and then shredded to bits as you are trying to sew those kinds of much lighter and more delicate fabrics. The same concept applies for more heavy fabrics like Wool, Denim, Fleece, Canvas, Chambray, etc.... when you will then need to switch out and adjust your machine needle in the reverse manner to a bigger and more sturdy size needle to best sew for those heavier kinds of fabric.... so that you can not only sew thru them much quicker and easier but be able to do so •WITHOUT• constantly breaking your needle in your machine as you try to sew through heavier fabrics like that. FIRMLY SUGGEST: That if you like and enjoy best mostly sewing garments with using a wide variety of many different kinds of fabrics in many different styles and textures??..... then also make sure that you always keep a variety of several different kinds & sizes of •SEWING MACHINE NEEDLES• readily on hand in your sewing supplies in order to be able to switch out the needles in your sewing machine as you need them with each different kind of fabrics, too. Make certain that you always have plenty of "Universal" needles on hand to change out regularly as they dull after completing several different projects. For most of your typical sewing needs.... as long as you are using a Steel-Wool stuffed pin cushion that will always automatically sharpen your pins & needles as you insert & remove them... then there is no need to constantly keep changing and switching out your sewing machine needle ●EVERY TIME● that you complete a current project. Doing so is just completely WASTEFUL if the needle isn't even dull yet. 🙄 Also make sure to pick up a packet(s) of smaller sized/sharper sewing machine needles for more Delicate & Fragile fabrics..... while also making sure that you always have a packet(s) of the larger sized sturdy machine needles for much heavier fabrics like Wool/Denim/Canvas/etc.. in your sewing tools arsenal, too. Because making sure that you always switch out your machine needle to the correct kind/size of needle that is actually needed for the kind of fabric(s) that you are currently using??..... makes •ALLLLLL• the difference in the world as to how your sewing is going to finally turn out in the end result to look more "professional"... but also as how it will affect just how much you will then much better ●ENJOY● your sewing now that you won't have to constantly be dealing with so many frequent issues, stress and frustrations brought about by •NOT• using the correct size/kind of sewing machine needle for the type of fabrics that you are currently sewing.🤷‍♂️

Hand sewing is a great alternative as well :) Much easier to get started

I want to learn the right way to hand sew!

@@GloryAllan cool

​@@GloryAllanI taught myself how to sew ❤❤❤

By hand

@@Its_Aquokkalover yea

I say this as someone who's very poor and started out with nothing and no one to teach me... You're already way past an advantage compared to most people who want to sew with all your mother's stuff! Not to mention, you have youtube tutorials! You're good mate, the only thing stopping you from creating ANYTHING right now is yourself!!! Go for it! Make ur dreams come true! ❤

Usually local fabric shops. Being able to go in store and learn about the fabric is best.

A short on what fabrics are right for what garment would be great! 😊

Noooooooo why?????

@@GloryAllan I mean I don't blame him but do kinda. My family got one from friend (who didn't need it) and I really felt lucky to get it, wanted it and use it but I only told about it to my mom. And since my Dad didn't know and he is minimalistic he threw it out the next day after getting it🥲. I didn't expect him to threw it out so soon, so I didn't yet tell him I wanna use it. Now I'm sewing manually and saving for a new one 😭😭

haha that's a great pun for the video "how to actually sew" on my channel 😂 Love it!

Yes :) the requests will be geared towards new patterns, tho I don't think I'll be able to produce a video tutorial for every single pattern as I want to build a large pattern library. That being said, I'll have very detailed instructions - similar to my videos - for every pattern :)